Canon MultiPASS MP360 Manual de usuario
SmartBase MP370/MP360
User’s Guide
Canon
I
Safety information
Please read the safety warnings and cautions provided in this guide to ensure that you use your
machine safely. Do not attempt to use the machine in any way not described in this guide.
WARNING
You may cause an electric shock/fire or damage the machine if you ignore any of these safety
precautions.
zLocation
• Do not place the machine close to flammable solvents such as alcohol or thinners. If flammable
substances come into contact with electrical parts inside the machine, it may result in fire or
electrical shock.
zPower supply
• Never attempt to plug or unplug the machine from the power supply when your hands are wet.
This may result in electrical shock.
• Always push the plug all the way into the power outlet. If the prongs of the power plug come into
contact with metal objects, it may result in fire or electrical shock.
• Never damage, modify, stretch or excessively bend or twist the power cord. Do not place heavy
objects on the power cord. These actions may cause electrical damage and result in fire or
electrical shock.
• Never plug the machine into a power socket that is shared with other equipment (extension lead/
cord, 2- or 3-way adapter, etc.). This may result in fire or electrical shock.
• Plug the machine into a standard 220-240V AC, 50/60 Hz, two-prong* grounded outlet. Operate
the machine only from the type of power source indicated on the machine’s label or a fire,
electrical shock, or malfunction may occur. If you are unsure of the type of power available,
consult your local power company.
*The shape of the plug and outlet vary depending on the country of purchase.
• Do not allow the power cord to be near objects that emit heat. The outer cover of the power cord
may melt resulting in fire or electrical shock.
• Never use the machine if the power cord is bundled or knotted. Knots in the cord may result in
fire or electrical shock.
II
• If you detect smoke, unusual smells or strange noises around the machine, immediately unplug
the machine at the power supply and contact your local authorized Canon dealer or the Canon help
line. Using the machine in such conditions may result in fire or electrical shock.
• Periodically, unplug the machine and use a dry cloth to wipe off any dust or dirt collected on the
plug and the power outlet. If the machine is placed at a location exposed to a lot of dust, smoke,
or high humidity, the dust collected on the plug absorbs moisture and may cause insulation failure
and fire.
zMaintenance
• Do not service the machine yourself except as specifically described in this guide. If further
servicing is required, contact your local authorized Canon dealer or the Canon help line.
• When storing the machine, choose a location where the machine is not exposed to dust. Dust
accumulation may prevent the machine from operating properly.
• Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene
or thinners. If flammable solvents come in contact with electrical components inside the machine,
it could cause a fire or electrical shock.
• Always turn OFF the power and unplug the machine from the power outlet before cleaning the
machine. If you accidentally switch the machine ON while cleaning it, it may result in injury or
damage the machine.
zHandling
• Do not attempt to disassemble or modify the machine. There are no user serviceable parts inside
the machine. The machine contains high-voltage components. Never attempt any maintenance
procedure not described in this guide. Incorrect maintenance procedures may damage the
machine, or cause a fire or electrical shock.
• Do not drop paper clips, staples, or other metal objects inside the machine. Also do not spill water,
liquid, or flammable substances inside the machine. If these items come into contact with
high-voltage parts inside the machine, it may result in fire or electrical shock. If these items are
dropped or spilled in the machine, turn OFF the power and unplug the power cord immediately
with dry hands. Then contact your local authorized Canon dealer or the Canon help line.
• Do not use flammable sprays near the machine. This could cause a fire or electrical shock if the
spray comes into contact with electrical components inside the machine.
• There are high-voltage components inside the machine. If you are looking inside the machine to
clear paper jams etc., do not allow metal objects such as jewelry to come into contact with the
inside of the machine. Contact may result in burns or electrical shock.
III
zOthers
• This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
• When setting the machine near electric products with fluorescent lighting, separate the machine
at least 5 7/8 inches (150 mm) from electric products equipped with fluorescent lighting. If you
place it near to them, the machine may malfunction as a result of the noise emitted by the
fluorescent lighting.
• When turning the power OFF, be sure to press [ON/OFF] and confirm that the [Alarm] lamp has
extinguished. If you pull the power plug out of the wall outlet while the [Alarm] lamp is lit or
flashing, the print head is not protected, and you may not be able to print later.
CAUTION
You may cause injury or damage the machine if you ignore any of these safety precautions.
zLocation
• Do not place the following objects on top of the machine. If such objects come into contact with
internal electrical components, the machine may short-circuit, resulting in fire or electrical shock.
–Metal objects such as jewelry and watches
–Containers of water or other liquids such as glasses, vases, or pot plants
If water does spill inside the machine, turn OFF the power immediately by pressing the [ON/OFF]
key, and disconnect the power cord. Then contact your local authorized Canon dealer or the
Canon help line.
• Do not block or cover the ventilation port or any openings on the machine with objects, as it may
cause the inside of machine to overheat and cause a fire.
• Place the machine on a flat, stable, vibration-free surface that is strong enough to support its
weight. If the machine topples over, it may result in injury.
• Do not use or store the machine outdoors.
• Do not install the machine near devices that contain magnets or generate magnetic fields, such as
speakers.
• To ensure proper ventilation, make sure the machine is approximately 4 inches (100 mm) away
from walls and other equipment.
IV
• Do not install the machine in a location that is very humid or dusty, in direct sunlight, outdoors,
or close to a heating source. Installing in such a location may result in fire or electrical shock. To
avoid the risk of fire or electrical shocks, install the machine in a location with an ambient
temperature range of 15°C to 27.5°C (59°F to 81.5°F) and humidity of 20% to 80% (condensation
free).
• Do not place the machine on a thick rug or carpet. If fibers or dust come inside the machine, it
could cause a fire.
zPower supply
• Never remove the plug by pulling on the cord. Pulling on the power cord may damage the cord
and cause a fire or electrical shock.
• When turning OFF the power, be sure to press [ON/OFF] or unplug the machine. However, if the
machine is unplugged during printing, the print head is not protected with the cap that prevents
the ink from drying. This may affect the print quality of the machine when printing later.
• During electrical storms, turn OFF the power and disconnect the power cord from the power
outlet.
• Do not use an extension cord as this may result in fire or electrical shock.
• Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the
power cord if necessary. Otherwise you will be unable to disconnect the power plug in case of an
emergency, and it may result in fire or electrical shock.
• Never use a power supply source other than the one rated for the machine in the country where
you purchased the machine as it may result in fire or electrical shock. The operating requirement
of this machine is as follows:
220-240V AC, 50/60 Hz
• Do not plug the machine into the same circuit as appliances such as an air conditioner, television,
or copier. These devices generate electrical noise which may interfere with your machine’s
operation.
• Whenever you turn OFF the power and unplug the machine, wait at least five seconds before you
plug it in again.
V
• Use only the power cord that came with the machine. Using a different power cord may cause
electric leakage or damage to the machine.
• Turn OFF the power and unplug the machine in the following conditions:
–When the power cord or plug is damaged or frayed.
–If liquid has spilled into the machine.
–If the machine has been exposed to rain or water.
–If the machine does not operate normally when you have followed the instructions in the guides
included with your machine.
–If the machine does not operate normally when you have followed the instructions provided in
Chapter 11, “Troubleshooting.”
–If the machine has been dropped or damaged.
–If the machine exhibits a distinct change in performance, indicating a need for servicing.
• Turn OFF the power and disconnect the power cord if the machine will not be used for a long
period such as during holidays.
zHandling
• Close the document cover gently to avoid catching your hand.
Failing to do so may result in personal injury.
• Do not press down hard on the document cover when using the
platen glass to scan thick books. This may damage the platen
glass and document cover and/or result in personal injury.
• Do not touch the high-voltage electrical parts as this may result in electrical shock.
• Do not place heavy objects on top of the machine as these may topple over and result in injury.
• When removing paper jammed in the machine, be careful not to get ink on your hands or clothing.
If ink gets on your hands or clothing, wash them soon in running water. If you use hot water, the
ink may adhere and become difficult to remove.
VI
• After printing, do not touch the electrical contacts of the print head. They will be hot and may
result in burns or electrical shock.
• Do not subject the machine to strong physical shock or vibration. This can damage the machine’s
components.
• Before moving the machine, turn OFF the power and unplug the machine.
• When moving the machine, carry the machine at both ends.
• A distinct change in performance may indicate a need for servicing.
• Do not insert your hands into the machine while it is printing. Parts inside the machine are moving
and this may result in injury.
• Do not overturn the machine. Ink may leak out and stain clothing or the surrounding area.
• Adjust only those controls that are covered by the instructions in the guides since improper
adjustment of other controls may result in damage and require extensive repair by a qualified
technician to restore the product to normal operation.
zPrint head/Ink tanks
• For safety reasons, store print heads and ink tanks out of the reach of small children. If a child
ingests any ink, consult a doctor immediately.
• Do not shake print heads or ink tanks. Ink may leak out and stain clothing or the surrounding area.
• Never touch the print head.
VII
Legal limitations on usage of your product and
the use of images
Using your product to scan, print or otherwise reproduce certain documents, and the use of such
images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and
may result in criminal and/or civil liability. A non-exhaustive list of these documents is set forth
below. This list is intended to be a guide only. If you are uncertain about the legality of using your
product to scan, print or otherwise reproduce any particular document, and/or of the use of the
images scanned, printed or otherwise reproduced, you should consult in advance with your legal
advisor for guidance.
.
• Paper money
• Money orders
• Certificates of deposit
• Postage stamps (canceled or uncanceled)
• Identifying badges or insignias
• Selective service or draft papers
• Checks or drafts issued by governmental agencies
• Motor vehicle licenses and certificates of title
• Traveler’s checks
• Food stamps
• Passports
• Immigration papers
• Internal revenue stamps (canceled or uncanceled)
• Bonds or other certificates of indebtedness
• Stock certificates
• Copyrighted works/works of art without permission
of copyright owner
Canon MP370/360 User’s Guide.
Copyright
Copyright © 2003 by Canon Inc. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without
the prior written permission of Canon Inc.
Trademarks
• Canon is a registered trademark.
• ScanGear is a registered trademark of Canon Inc.
• SmartBase is a trademark of Canon Inc.
• Microsoft®and Windows®are registered trademarks of Microsoft Corporation.
• CompactFlash™ is a trademark of SanDisk Corporation.
• MEMORY STICK®is a registered trademark of Sony Corporation.
• SmartMedia™ is a trademark of Toshiba Corporation.
• Microdrive™ is a trademark of International Business Machines Corporation.
• MultiMedia Card™ is a trademark of the MultiMedia Card Association.
• xD-Picture Card™ is a trademark of Fuji Photo Film Corporation.
• SD Secure Digital™ is a trademark of Toshiba Corporation.
• All other product and brand names are registered trademarks or trademarks of their respective owners.
This equipment conforms with the essential requirements of EC Directive 1999/5/EC.
We declare that this product conforms with the EMC requirements of EC Directive 1999/
5/EC at nominal mains input 230V, 50 Hz although the rated input of the product is
200V–240V, 50/60 Hz. If you move to another EU country and are experiencing trouble
please call the Canon Help Desk.
(For Europe Only)
1
As an ENERGY STAR®Partner, Canon Inc. has determined that this product meets the
ENERGY STAR®guidelines for energy efficiency.
Exif Print
This machine supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication between digital cameras and printers.
By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is
used and optimised, yielding extremely high quality prints.
Otros manuales para MultiPASS MP360
4
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Impresora todo en uno de Canon
Canon
Canon ImageCLASS MF4690 Manual de usuario
Canon
Canon imageRUNNER ADVANCE C255 Series Manual de usuario
Canon
Canon imageCLASS D320 Guía del usuario
Canon
Canon g3000 series Guía de configuración
Canon
Canon MultiPASS C555 Manual de usuario
Canon
Canon iR6020i Manual de usuario
Canon
Canon Color imageCLASS MF8350Cdn Guía de seguridad
Canon
Canon Staple Finisher-S1 Manual de usuario
Canon
Canon ImageCLASS MF5730 Manual
Canon
Canon imagePRESS C7000 Series Especificaciones
Canon
Canon 5119B001AA Instrucciones de montaje
Canon
Canon PIXMA G7050 Manual de usuario
Canon
Canon PIXMA MX712 Manual de usuario
Canon
Canon PIXMA MX892 Manual de usuario
Canon
Canon PIXMA MP830 Manual de instrucciones
Canon
Canon PIXMA MX522 Hoja de información del producto
Canon
Canon GP200 Manual de usuario
Canon
Canon PIXMA MP140 Series Manual de usuario
Canon
Canon iR2030 Manual de usuario
Canon
Canon Color imageCLASS MF8170c Manual de funcionamiento
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
