Canon MP730 - MultiPASS Color Inkjet Manual

NOTE

•For information on the components included with your machine and system requirements,

refer to pp.1-1, 1-2, of the Quick Reference Guide.

•When installing the software in Windows 2000/XP, you must log on as Administrator or

have Administrator privileges.

•If you have previously installed an earlier version of the MultiPASS Suite software (version

4.4 or earlier), you must remove it before installing this version. For details on removing the

software, refer to the documentation of the previous version.

Install the software.

1Turn on your computer.

2On your computer, quit any open applications, including virus checkers.

3Insert the Canon MP730/700 Setup CD-ROM into your

disk drive.

When the [MP Setup] screen on the right is displayed,

perform steps 1 and 2 in order.

CAUTION

• Do not perform step 3 on the last page until you reach

it after performing all the other instructions before it.

If this screen is not displayed, on the Windows desktop, double-click [My Computer]

(Windows XP: Click [Start], then click [My Computer]). Open the CD-ROM icon, then

double-click [setup (setup.exe)].

Set-Up Sheet

IMPORTANT • DO NOT connect the USB cable before installing the software.

Thank you for purchasing the imageCLASS MP730.

To get your machine ready for use, please follow the instructions in this Set-Up Sheet

before referring to any other documentation.

READ THIS SHEET FIRSTREAD THIS SHEET FIRST

●STEP1: Install MP Drivers

1In the [MP Setup] screen, click [Install MP Drivers].

2Follow the on-screen instructions.

[Yes, I want to restart my computer now.] is

selected. (Click [Finish] to restart your computer.

Do not remove the CD-ROM at this stage.)

3Click [Finish].

●STEP2: Install MP Toolbox

1In the [MP Setup] screen, click [Install MP Toolbox].

• When you restart your computer and this screen is not displayed or you have closed it, on

the Windows desktop, double-click [My Computer] (Windows XP: Click [Start], then click

[My Computer]). Open the CD-ROM icon, then double-click [setup (setup.exe)].

2Follow the on-screen instructions.

3Click [Finish].

At this point, DO NOT perform step 3. Continue with the steps on this Set-Up

Sheet until required to connect the USB cable (sold separately).

Remove the shipping material from the machine.

1Place the machine on a flat surface.

2Remove all shipping tapes from the exterior of the machine.

3Open the document cover Aand remove the protective sheet B.

4Open the feeder cover Cand remove the shipping material Das shown below.

If you do not need to restart your computer,

the following screen is displayed.

If you need to restart your computer,

the following screen is displayed.

Assemble the machine.

Connect the telephone line and any necessary external

device.

NOTE

• Before using your machine, you need to make sure it is set for your telephone line type.

For details, see p. 7-2 of the Quick Reference Guide.

You can connect an external

device (telephone or answering

machine) if necessary.

Connect the telephone line

cord to the wall jack.

3Attach the document tray,

then lower it.

2Attach the paper output tray

until an audible click is heard.

1Attach the multi-purpose tray.

Telephone or answering machine

Built-in computer modem and telephone

Connect external devices as follows:

Telephone

line Machine

Telephone

line Machine

Telephone or

answering machine

Computer

= Telephone line jack

= External device jack

Telephone

TELLINE

Connect the power cord.

IMPORTANT

• Before turning on the power, make sure the document cover Ais closed.

Load paper.

Place a stack of paper (print-side up) in the multi-purpose tray q.Pinch the paper

guide Aand adjust to the width of the stack w.Then place the tray cover Dover

the multi-purpose tray e.

NOTE

•Make sure the stack does not exceed the paper limit mark Bor tab C.Otherwise a paper

jam may occur.

PLEASE WAIT

DISPLAY LANGUAGE

< ENGLISH >

Approx. 30 seconds

1Plug the power

cord into a socket.

2When you connect the

machine, the above messages

should appear in the LCD.

•If nothing appears in the LCD,

press [ON/OFF (1 sec.)] to turn on

the machine.

3Use [2] or [3] to select

the language for the

LCD, then press [OK].

Turn over to

continue

Turn over to

continue

Install the printhead.

1Press [Open] qand lift up the scanning unit w.

IMPORTANT

• Do not touch the metal rod or any parts inside the

machine.

• Do not turn off the machine when opening the scanning

unit.

2Remove the printhead from its packaging, then remove the orange protective

cap A.

IMPORTANT

•Do not touch the electrical contacts B.

3Raise the lock lever C,then gently slide the printhead into the holder.

Lower the lock lever.

IMPORTANT

• Do not touch the lock lever once the printhead has been installed.

Install the ink tanks.

1Start with the yellow ink tank. Pull the orange tape in the direction of the arrow

and remove the plastic wrapper so you can see the air hole A.Turn the ink tank

over so that the protective cap Bis facing up. Then hold the ink tank as shown

below and remove the protective cap B.

NOTE

•To avoid spilling ink, never

press on the long sides of

the ink tank C.

•Once you remove the

protective cap B,do not

touch the ink port D.

2Insert the ink tank (label-side up) into the correct slot (refer to the color guide on

the printhead). Press down gently on the ink tank until an audible click is heard.

3Repeat steps 1 and 2 to install the remaining magenta, cyan, and black ink tanks.

4Close the scanning unit until it locks into place.

Be sure to now align the printhead as explained in step 9.

Black

Yellow

Magenta

Cian

Black

BCI-3eC

BCI-3eBK BCI-3eM BCI-3eY

Yellow

Magenta

Cian

PUSHPUSHPUSH

PUSH

Black

Black Yellow

Magenta

Cian

Black

BCI-3eY

Yellow

PUSH

Black Yellow

Magenta

Cian

Black

BCI-3eY

Yellow

PUSH

PUSU

Yellow

MadeinJapan

Ink Tank

BCI-3eY

PULL

BCI-3eY

Ink Tank

Align the printhead.

NOTE

• If you are installing the software, you can also align the printhead from the software.

For details, refer to the Software Guide.

1When the LCD Adisplays the following, press [OK].

The machine will print a horizontal pattern, and the LCD will display:

2In column A on the printout, note which box has the most solid image. Note the

value next to this box and use [2] or [3] on the operation panel to enter it.

Then press [OK].

3Repeat step 2 for columns B to K.

4When values for all columns have been entered and the LCD displays the

following, press [#] to return to standby mode.

NOTE

•If streaks appear on the printed

surface when you use the machine,

perform the vertical printhead

alignment. For details, refer to the

User’s Guide.

PRINT VERT. PATTERN?

YES=(A) NO=(#)

Most solid

box

Least solid

box

BAD

SAMPLE

GOOD

SAMPLE

Column A Value for column A

CHANGE H VALUE

A 0

ALIGN PRINT HEAD

PRESS OK KEY A

Connect the USB cable to complete the computer settings.

●STEP3: Connect the machine to your computer with the USB cable.

1Make sure the machine is turned on.

2Connect the USB cable Ato the machine and computer USB ports.

Depending on your computer, a message may display asking you to restart your

computer. If this is the case, restart your computer.

●Install Utility Software

To install the Utility software, in the [MP Setup] screen, click [Install Utility

Software].

You can choose not to install the Utility software at this stage and install it later.

●View User’s Manual

To read the manual on the CD-ROM, click [View User’s Manual] on the [MP Setup]

screen.

CAUTION

• For Windows 2000, the machine may not be able to be set as the default printer.

If that happens, refer to Setting the default printer in the Software Guide.

Congratulations! You have now completed your machine

setup.

Where to from here...

Once you have completed all steps in this Set-Up Sheet, refer to the Quick Reference

Guide for basic operation instructions of all functions of your machine.

If after reading the Quick Reference Guide you require more detailed information,

refer to the User’s Guide or Software Guide (included in the CD-ROM).

Part no. HT3-2133-000-V.1.0

Canon, imageCLASS, and BCI are trademarks of Canon Inc.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

PRINTED IN THAILAND

Otros manuales para MP730 - MultiPASS Color Inkjet

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon PIXMA MG5320 Series Manual de usuario

Canon

Canon PIXMA MP950 Manual de instrucciones

Canon

Canon imageRUNNER ADVANCE DX 717iZ Manual de usuario

Canon

Canon PIXMA MX512 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual de usuario

Canon

Canon imageRUNNER ADVANCE C9075S PRO Manual del propietario

Canon

Canon MAXIFY MB5150 Guía de configuración

Canon

Canon Staple Finisher-S1 Manual de usuario

Canon

Canon iR2020 Series Manual de usuario

Canon

Canon PIXMA MG5420 Manual de usuario

Canon

Canon iR1600 Series Manual de usuario

Canon

Canon PIXMA MP530 Manual de usuario

Canon

Canon 2921B002 Manual de usuario

Canon

Canon Color imageRUNNER C5180 Series Manual de usuario

Canon

Canon PIXMA MX7600 Manual de usuario

Canon

Canon MAXIFY MB5320 Manual de usuario

Canon

Canon IMAGERUNNER C2220i Manual de usuario

Canon

Canon imageRUNNER ADVANCE C3330 Series Manual de usuario

Canon

Canon MultiPASS C20 Manual de usuario

Canon

Canon imageCLASS D320 Guía del usuario

Canon

Canon imageRUNNER 5020 Series Manual de usuario

Canon

Canon PIXMA MP800 Manual de usuario

Canon

Canon iR2025 Manual de usuario

Canon

Canon imageCLASS MF6500 Series Guía del usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario