Cannon CAST18R Guía de instalación
USE, CARE AND INSTALLATION
INSTRUCTIONS
FOR YOUR NEW CANNON HORIZON HEATER
Models: CAST18R, CAST24R, CAST32R
Delivers a wide heat spectrum for consistent
warmth, backed by the strength & rigidity of the
wave element design.
™
• The heater must be installed in accordance with the manufacturer’s
installation instructions.
• The heater MUST ONLY be installed or removed by an
authorised person.
• The heater MUST be installed in accordance with AS/NZS 3000
(wiring rules)and all other applicable local & state building and
OH & S requirements.
Models: CAST18R, CAST24R, CAST32R
Thank you for purchasing a Cannon Horizon Heat strip heater.
Outdoor entertaining is increasingly popular and the Cannon Horizon™ strip heaters are
the perfect solution to extend your outdoor living spaces beyond the summer period, for
year-round comfort. The Horizon Heat™ range provides a number of options, depending
on the area size and heating requirements with an 1800W, 2400W and 3200W models on
offer. Backed by a 2 year warranty, the Cannon Horizon strip heater range provides perfect
outdoor heating for all occasions.
Wide & even heat with Horizon Heat™
The Cannon Horizon strip heater range uses far infrared heating, which warms objects and
people, rather than the air, for a more efcient and comfortable heating source. Its wave
design allows a wide angled coverage for a broad heat distribution and offers extra strength
and rigidity to the heater construction.
Easy to Install and Operate
Our Canon Horizon range has been designed for easy installation into your outdoor
living spaces. With the 1800W and 2400W being supplied with a 3 pin, 10amp plug for
quick ‘plug-n-play’ operation and mounting brackets to direct the heat, easy installation and
operation is assured. All Cannon Horizon heaters are supplied with a remote control,
in addition to an on-product switch and a 3 heat setting display.
Efcient heating & low running costs
When compared to outdoor gas heating, electric strip heaters offer an efcient and low cost
option for warming your outdoor living space.
Outdoor protection
The Cannon Horizon range of heaters have an IP65 rating. This rating ensures that
electrics are protected from dust and water ingress and are ideal for outdoor undercover
living and entertaining environments.
Models: CAST18R, CAST24R, CAST32R
CAUTION
Young children must be supervised when in the vicinity of this heater, when in
operation.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of knowledge, unless
they have been given supervision or instructions concerning the use of the
appliance by a person responsible for their safety and have the capacity to follow
these instructions.
Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
This heater is not intended for use by young children or inrm people without
supervision.
1. DO NOT use this heater with a programmer, timer or any other device that switches
the heater ON automatically, since a re risk exists if the heater is covered or
positioned incorrectly.
2. DO NOT use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
3. DO NOT place the unit close to curtains and/or other ammable objects.
4. DO NOT place articles on or against this appliance.
5. DO NOT wrap the power supply cord on the unit.
6. DO NOT use this unit in place where causticity or volatile air exists,
i.e. dust, steam, gas, etc.
7. DO NOT use this unit as a cloth drier or towel drier.
8. DO NOT use this unit as a sauna heater.
9. DO NOT use this unit as a room heater.
10. DO NOT use this unit in an animal propagating area.
11. DO NOT use this unit in heating system of hot air centre.
12. DO NOT immerse this unit into water for cleaning.
13. The unit gets VERY HOT during operation. To avoid burns DO NOT touch
any surface of the heater.
14. The heater will retain signicant heat for a period after shutdown. To avoid burns
DO NOT touch any part of the heater during this period.
15. The unit must be handled with care, avoid vibrating or hitting the unit.
16. The unit must be securely grounded during operation.
17. When damaged, the unit must be repaired by qualied service agent.
18. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
Models: CAST18R, CAST24R, CAST32R
CAUTION
19. When assembling, keep clear from any board or ammable material.
20. The unit is for household use only. It is not suitable for use on a building site,
greenhouses, barn or stable, where there’s ammable dust.
21. The head of the unit is at high temperature during operation. Unplug the unit
and wait till it’s cool before cleaning.
22. The units (1800W & 2400W) should be plugged in a socket outlet, which is easily
visible and reachable.
23. DO NOT store or use any ammable liquids in the vicinity of this unit.
24. DO NOT spray aerosols in the vicinity of this appliance whilst appliance is operating.
Most aerosols are ammable, which can be a re hazard if used neae appliance when
it is in use.
25. DO NOT modify this appliance. Any modication may create a hazardous situation and
void your warranty.
26. DO NOT allow young children or the inrm to remain unsurpervised or sleep directly
infront of or below the appliance while in operation.
WARNING:
This heater is not equipped with a device to control the room temperature.
Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision
is provided.
IMPORTANT INFORMATION:
Models CAST18R and CAST24R are tted with an Australian / New Zealand
exible 1.8M cord and 3 pin plug. A dedicated 240V 50Hz earthed 10AMP
socket outlet must be used with this appliance.
Model CAST32R are tted with an Australian exible 1.8M cord and can be
hardwired, or it can be tted with a 3 pin, 15amp plug into a 15amp socket
outlet. This MUST only be performed by an authorised person. In accordance
with local regulations.
DO NOT Coil or bundle the electric cord to reduce its length as overheating
may result which could become a re hazard.
The electrical cord MUST NOT come into contact with the heated parts of this
appliance.
DO NOT use this appliance as a portable heater. Use of an extension cord on
this appliance is not recommended.
Page 4
Preparation:
1. Unpack the carton. Take out the accessories pack from the carton. Make sure the
accessories listed in the below Accessories Check List are included. If anything is
missing, ask your retailer to provide it to you, or contact the Cannon distributor.
2. Ensure you have a philips - head screw driver and a spanner (not supplied) suitable
for M6 screw nut.
3. Read this instruction manual carefully before installation and use. Keep this instruction
manual in a safe place.
Cleaning:
Unplug the unit from the socket outlet before cleaning. Make sure unit is cool prior to
cleaning. It should be wiped with a damp cloth only, avoid excess liquid.
PREPARATION
ACCESSORIES NAME QTY
Upper L Bracket 2
Lower L Bracket 2
Expansion Bolt M6*70 2
Screw M6* 16 2
Accessories Check List:
ACCESSORIES NAME QTY
Remote Control 1
Allen Key 1
Screw M6*8 4
Models: CAST18R, CAST24R, CAST32R
ACCESSORIES NAME QTY
Remote Control 1
Allen Key 1
Screw M6*8 4
MODEL NO. CAST18R CAST24R CAST32R
Rated Power (Watts) 1500 -1800W 2000 - 2400W 2700 - 3200W
Rated Voltage 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz
Plug Type 10 Amp 10 Amp
Hardwired unit or
15amp plug
(Not supplied)
Power Cord Length
(Metres) 1.8M 1.8M 1.8M
IP Rating IP65 IP65 IP65
Product Dimensions (mm) 1263 x 154 x 74 1543 x 154 x 74 1938 x 154 x 74
Unit Weight (Kg) 5.0Kg 6.8Kg 8.0Kg
Mounts Supplied Ceiling & Wall Ceiling & Wall Ceiling & Wall
Heat Settings 3 (Low/Med/High) 3 (Low/Med/High) 3 (Low/Med/High)
Remote Control Yes Yes Yes
Timer Cut Off Up to 9 hrs Up to 9 hrs Up to 9 hrs
1
2
3,4,5
6
10
7
<
<
11
8
9
12
<
NO. PART NAME
1 Expansion Bolt M*70
2 Upper L Bracket
3 Washer
4 Spring Washer
5 Screw Nut M6
6 Screw M6* 16
PARTS DESCRIPTIONS:
SPECIFICATION
NO. PART NAME
7 Lower L Bracket
8 Main Switch
9 Control Panel
10 Screw M6*8
11 Allen Key
12 Remote Control
Page 6
Models: CAST18R, CAST24R, CAST32R
HEATING COVERAGE
For the majority of outdoor heating applications the most effective method to heat a particular area
is displayed below. The diagrams provide an easy selection guide for the approximate coverage
capacity in common settings & area sizes.
><
>
<
><
(X)
(Z)
(Y)
Model (X)m (Y)m (Z)m Heating Area m2
CAST18R 2.5 4 1.8 10
CAST24R 3 4.5 1.8 13.5
CAST32R 3.5 5 1.8 17.5
Thermal
Radiation
><
><
><
(X)
(Z)
(Y)
Model (X)m (Y)m (Z)m Heating Area m2
CAST18R 2.5 4 1.8 10
CAST24R 3 4.5 1.8 13.5
CAST32R 3.5 5 1.8 17.5
Thermal
Radiation
CAST18R
(4-6 seat capacity)
CAST24R
(6-8 seat capacity)
CAST32R
(8-10 seat capacity)
Outdoor enclosed
Table settings
Models: CAST18R, CAST24R, CAST32R
INSTALLATION
The Cannon Horizon strip heaters use Horizon Heat which use infrared radiant heat, that heats
objects and people rather than air, for a more efcient and comfortable heat. Having the optimal
placement, where people are within the heated footprint area, will ensure an ideal result.
Application
Recommended for use in outdoor uncovered areas with a ceiling height between 2.1 - 2.7m.
Areas such as patios, verandas, balcony ceilings & spot heating indoors for open areas including
drying rooms, bathrooms, studios or exercise spaces.
Heated Area
The below drawings provide an approximate heating area for each model, based on an enclosed
indoor & outdoor environment, with an overhead mounted unit.
<>
<>
2000
1263
<>
2100
<>
<>
3500
1938
<>
2100
<>
<>
2600
1543
<>
2100
<>
<>
1500
1263
<>
2100
<>
<>
2700
1938
<>
2100
<>
<>
2000
1543
<>
2100
INDOOR SPOT HEATING
Page 8
Models: CAST18R, CAST24R, CAST32R
OUTDOOR ENCLOSED AREA
INSTALLATION
Installation Requirements
Please ensure that you inspect the unit prior to installation for any damage. If damage is present
DO NOT INSTALL or OPERATE and contact the supplier for advice.
For optimal positioning we recommend a horizontal ceiling mounted unit, directly above the area
that requires heating, facing downward. If this position is not possible, then the Cannon Horizon
models are supplied with mounting brackets that allow for downward angled wall and ceiling
positions. For this position, please ensure that the mounting height is within 2.1M to 2.7M.
Heating effectiveness will be reduced if appliance is mounted at greater heights.
CORRECT INSTALLATION INCORRECT INSTALLATION
The electrical connection or socket outlets should not be located at the back of the heater. They
must be located outside the installation footprint of the unit, to reduce the heat build-up behind the
unit. If the strip heater is mounted on a incline (gabled ceiling), ensure that the electrical connection
is located at the lowest point of the heater.
DO NOT use power boards or double adaptors for this appliance.
ORH OIM
ORH OIM
ORH OIM
Models: CAST18R, CAST24R, CAST32R
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Calentador de Cannon
Manuales populares de Calentador de otras marcas
Empire Heating Systems
Empire Heating Systems WCC65 Manual de usuario
Wetekom
Wetekom 92 86 43 Manual de usuario
Desa
Desa SPC170-F Manual de usuario
Watlow
Watlow Watrod Electric Tubular Heaters Manual de usuario
Haverland
Haverland ECO-DRY GPS Series Manual de lista de piezas
Stelpro
Stelpro ASILVC2060 Series Manual de usuario