CanadianSolar CSI Series Manual de usuario

CSI SERIES GRID-TIED PV Inverter

CSI-7KTL1P-GI-FL & CSI-8KTL1P-GI-FL

CSI-9KTL1P-GI-FL & CSI-10KTL1P-GI-FL

INSTALLATION AND OPERATION MANUAL

VERSION 1.2

CANADIAN SOLAR INC.

Global Headquarters:

545 Speedvale Avenue, West Guelph, Ontario N1K 1E6, Canada

Tel: +1 519 837 1881

Sales Inquiries Email: [email protected]

Technical Inquiries Email: [email protected]

CANADIAN SOLAR (USA) , INC.

North America Headquarters:

3000 Oak Road, Ste 400, Walnut Creek, CA 94596

Tel: +1 888 998 7739

Sales Inquiries Email: [email protected]

Technical Inquiries Email: [email protected]

This manual is subject to change without prior notiﬁcation. Copyright is

reserved. Duplication of any part of this issue is prohibited without written

permission.

Europe, Middle East & Africa

Canadian Solar EMEA GmbH

Landsberger Strasse 94, 80339 Munich, Germany

Tel.: +49 89 5199689 0

E-mail: [email protected]

Important notes

● Product specifications are subject to change without notice. Every attempt has been made

to make this document complete, accurate and up-to-date. Individuals reviewing this

document and installers or service personnel are cautioned, however, that Canadian Solar

reserves the right to make changes without notice and shall not be responsible

for any damages, including indirect, incidental or consequential damages caused by reliance

on the material presented including, but not limited to, omissions, typographical errors,

arithmetical errors or listing errors in the material provided in this document.

For professional use only

● Professional installer must read these guidelines carefully and strictly follow these instructions.

Failure to follow these instructions may result in death, injury or property damage.

The installation and handling of Inverters requires professional skills and should only be

performed by qualified professionals. The installers must inform end–users (consumers) the

aforesaid information accordingly.

● Canadian Solar accepts no liability for customers' failure to comply with the instructions

for correct installation and will not be held responsible for upstream or downstream systems

Canadian 's equipment has supplied.

● The customer is fully liable for any modifications made to the system; therefore, any hardware

or software modification, manipulation, or alteration not expressly agreed with the

manufacturer shall result in the immediate cancellation of the warranty.

● Given the countless possible system configurations and installation environments, it is

essential to verify adherence to the following:

● There is sufficient space suitable for housing the equipment.

● Airborne noise produced depending on the environment.

● Potential flammability hazards.

● Canadian Solar will not be held liable for defects or malfunctions arising from:

● Improper use of the equipment.

● Deterioration resulting from transportation or particular environmental conditions.

● Performing maintenance incorrectly or not at all.

● Tampering or unsafe repairs.

● Use or installation by unqualified persons.

● This product contains lethal voltages and should be installed by qualified electrical or service

personnel having experience with lethal voltages.

1. Introduction

2. Safety Instructions

2.1 Safety Symbols

2.2 General Safety Instructions

2.3 Notice For Use

3. Overview

3.1 Front Panel Display

3.2 LED Status Indicator Lights

3.3 Keypad

3.4 LCD

4. Installation

4.1 Select Location for the Inverter

4.2 Mounting the Inverter

4.3 Electrical Connections

Contents

………………………

………………………………………

………………………………………………

………………………………

………………………

……………………………………………

…………………………………………………

………………………………………………

…………………

…………………………………

……………………………

6. Operation 20

………………………………………………

5. Start & Stop

5.1 Start the Inverter

5.2 Stop the Inverter

………………………………………

………………………………

…………………………………

………………………………………………

……………………………………

………………………………………

1.1 Product Description 3

…………………………………

1.2 Packaging 4

…………………………………………

4.3.1 Connect PV side of inverter 13

………………

4.3.2 Connect grid side of inverter 16

………………

4.3.3 Max. overcurrent protection device (OCPD)

…

4.3.4 Inverter monitoring connection ……………

6.2.1 Lock screen 21

……………………………………

6.2 Information 20

…………………………………………

6.1 Main Menu 20

…………………………………………

1. Introduction

1.1 Product Description

Figure 1.1 Front side view

.3.

Canadian Solar single phase inverters integrate DRM and backflow power control

function, that could suitable for smart grid requirement.

Single phase series inverter contain 4 models which are listed below:

CSI-7KTL1P-GI-FL, CSI-8KTL1P-GI-FL, CSI-9KTL1P-GI-FL, CSI-10KTL1P-GI-FL

Figure 1.2 Bottom side view

6.3 Settings

6.3.1 Set Time

6.3.2 Set Address

6.4 Advanced Info.

6.4.1 Alarm Message

Contents

………………………………………………

………………………………………

……………………………………

………………………………………

………………………………

6.4.3 Version

6.4.4 Daily Energy

6.4.5 Monthly Energy and Yearly Energy

6.5 Advanced Settings

6.5.1 Select Standard

6.5.2 Grid ON/OFF

7. Maintenance

8. Troubleshooting

9. Specifications

…………………………………………

……………………………………

…………

…………………………………

………………………………

…………………………………

………………………………………………

…………………………………………

……………………………………………

6.4.2 Running Message 24

……………………………

6.5.3 Clear Energy

6.5.4 New Password

………………………………

…………………………………

6.4.6 Daily record

6.4.7 Communication Data

……………………………………

…………………………

6.5.5 Power control

6.5.6 Calibrate Energy

………………………………

…………………………………

6.5.7 AUS STD. Settings

10. Installation and commissioning checklist

……………

2.Safety Instructions

2.2 General Safety Instructions

WARNING:

Electrical installations must be done in accordance with the local and national

electrical safety standards.

.5.

CAUTION:

CAUTION, RISK OF ELECTRIC SHOCK symbol indicates important safety

instructions, which if not correctly followed, could result in electric shock.

CAUTION:

CAUTION, HOT SURFACE symbol indicates safety instructions, which if not

correctly followed, could result in burns.

NOTE:

NOTE symbol indicates important safety instructions, which if not correctly

followed, could result in some damage or the destruction of the inverter.

2.1 Safety Symbols

Safety symbols used in this manual, which highlight potential safety risks and important

safety information, are listed as follows:

WARNING:

WARNING symbol indicates important safety instructions, which if not

correctly followed, could result in serious injury or death.

Improper use may result in potential electric shock hazards or burns. This manual

contains important instructions that should be followed during installation and

maintenance. Please read these instructions carefully before use and keep them for

future reference.

WARNING:

Please don’t connect PV array positive(+) or negative(-) to ground, it could

cause serious damage to the inverter.

1. Introduction

1.2 Packaging

When you receive the inverter, ensure that all the parts listed below are included:

Table 1.1 Parts list

.4.

CSI SERIES GRID-TIED PV Inverter

CSI-7KTL1P-GI-FL & CSI-8KTL1P-GI-FL

CSI-9KTL1P-GI-FL & CSI-10KTL1P-GI-FL

INSTALLATION AND OPERATION MANUAL

VERSION 1.2

Part #

Description

PV grid tie inverter

Wall/pole bracket

Locking screws

Number

3 pairs

Manual

DC connector

3. Overview

3.1 Front Panel Display

Figure 3.1 Front Panel Display

3.2 LED Status Indicator Lights

There are three LED status indicator lights in the front panel of the inverter. Left LED:

POWER LED (red) indicates the power status of the inverter. Middle LED: OPERATION

LED (green) indicates the operation status. Right LED: ALARM LED (yellow) indicates

the alarm status. Please see Table 3.1 for details

Description

The inverter can detect DC power

No DC power or low DC power

The inverter is operating properly.

The inverter has stopped to supply power.

The inverter is initializing.

Alarm or fault condition is detected.

The inverter is operating properly.

Status

OFF

FLASHING

Light

POWER

OPERATION

ALARM

Table 3.1 Status Indicator Lights

2.Safety Instructions

2.3 Notice For Use

The inverter has been constructed according to the applicable safety and technical

guidelines. Use the inverter in installations that meet the following specifications ONLY:

1. Permanent installation is required.

2. The electrical installation must meet all the applicable regulations and standards.

3. The inverter must be installed according to the instructions stated in this manual.

4. The inverter must be installed according to the correct technical specifications.

5. To startup the inverter, the Grid Supply Main Switch (AC) must be switched on, before

the solar panel's DC isolator shall be switched on. To stop the inverter, the Grid Supply

Main Switch (AC) must be switched off before the solar panel's DC isolator shall be

switched off.

.6.

CAUTION:

The PV array (Solar panels) supplies a DC voltage when they are exposed to

sunlight.

CAUTION:

Risk of electric shock from energy stored in capacitors of the Inverter. Do not

remove cover for 5 minutes after disconnecting all power sources(service technician

only). Warranty may be voided if the cover is removed without unauthorized .

CAUTION:

The surface temperature of the inverter can reach up to 75℃ (167 F).

To avoid risk of burns, do not touch the surface of the inverter while it’s operating.

Inverter must be installed out of the reach of children.

WARNING:

To reduce the risk of fire, over-current protective devices (OCPD) are

required for circuits connected to the Inverter.

The DC OCPD shall be installed per local requirements. All photovoltaic source

and output circuit conductors shall have disconnects that comply with the NEC

Article 690, Part II. All Canadian Solar single phase inverters feature an

integrated DC switch.

CAUTION:

Risk of electric shock. Do not remove cover. There is no user serviceable

parts inside. Refer servicing to qualified and accredited service technicians.

.7.

4. Installation

4.1 Select a Location for the Inverter

.9.

3.3 Keypad

3.4 LCD

There are four keys in the front panel of the Inverter(from left to right):

ESC, UP, DOWN and ENTER keys. The keypad is used for:

Scrolling through the displayed options (the UP and DOWN keys);

Access to modify the adjustable settings (the ESC and ENTER keys).

3. Overview

The two-line Liquid Crystal Display (LCD) is located on the front panel of the Inverter,

which shows the following information:

Inverter operation status and data;

Service messages for operator;

Alarm messages and fault indications.

.8.

To select a location for the inverter, the following criteria should be considered:

Do not install in small closed spaces where air cannot circulate freely. To avoid

overheating, always make sure the flow of air around the inverter is not blocked.

Figure 4.1 Recommended Installation locations

Exposure to direct sunlight will increase the operational temperature of the inverter and

may cause output power limiting. Canadian Solar recommends inverter installed to avoid

direct sunlight or raining.

To avoid over heating ambient air temperature MUST be considered when choosing

the inverter installation location. Canadian Solar recommends using a sun shade

minimizing direct sunlight when the ambient air temperature around the unit exceeds

104°F/40°C.

When 1 or more inverters are installed in one location, a minimum 12inchs clearance

should be kept between each inverter or other object. The bottom of the inverter should

be 20inchs clearance to the ground.

Visibility of the LED status indicator lights and the LCD located at the front panel of

the inverter should be considered.

Adequate ventilation must be provided if the inverter is to be installed in a confined space.

NOTE:

Nothing should be stored on or placed against the inverter.

300mm

500mm

300mm 300mm

300mm

Figure 4.2 Inverter Mounting clearance

Install vertically with a maximum incline of +/- 5°.If the mounted inverter is tilted to an

angle greater than the maximum noted, heat dissipation can be inhibited, and may result

in less than expected output power.

4. Installation4. Installation

.11.

Dimensions of mounting bracket:

Figure 4.4 Inverter wall mounting

Please see Figure 4.4 and Figure 4.5 for instruction on mounting the inverter to a wall or pillar.

Figure 4.3 Inverter wall mounting

4.2 Mounting the Inverter

The inverter shall be mounted vertically. The steps to mount the inverter are listed below:

1. According to the figure 4.2, select the mounting height of the bracket and mark the

mounting holes. For brick walls, the position of the holes should be suitable for the

expansion bolts.

Locking screw

Suitable fixing screws

Bracket

Install on a wall or strong structure capable of bearing the weight.

.10.

.13.

4. Installation4. Installation

.12.

4.3 Electrical Connections

4.3.1 Connect PV side of inverter

The electrical connection of the inverter must follow the steps listed below:

1. Switch the Grid Supply Main Switch (AC) OFF.

2. Switch the DC Isolator OFF.

3. Assemble PV input connector to the Inverter.

Before connecting inverter, please make sure the PV array open circuit voltage is

within the limit of the inverter

Figure 4.5 Inverter pillar mounting

2.Make sure the bracket is horizontal and the mounting holes (in Figure 4.4 and Figure 4.5)

are marked correctly. Drill the holes into the wall or pillar at your marks.

WARNING:

The inverter must be mounted vertically.

3. Use the suitable screws to fix the bracket to the wall.

4. Lift up the inverter (be careful to avoid body strain), and align the back bracket on the

inverter with the convex section of the mounting bracket. Hang the inverter on the

mounting bracket and make sure the inverter is secure (see Figure 4.6)

Figure 4.6 Wall Mount Bracket

5. Use screws to fix the bottom of the inverter to the mount bracket.

Figure 4.7 Fix the inverter

The are two holes at the bottom of bracket, one to fix the inverter, another for the

lock. The diameter of the lock should be less than 0.27in (7mm).

iii) Crimp the contact pin to the wire using a proper wire crimper.

Figure 4.12 Crimp the contact pin to the wire

iv) Insert the contact pin to the top part of the connector and screw up the cap nut to

the top part of the connector.

4. Installation

The steps to assemble the DC connectors are listed as follows:

I) Strip off the DC wire for about 7mm, Disassemble the connector cap nut.

ii) Insert the wire into the connector cap nut and contact pin.

Figure 4.10 Disassemble the Connector Cap nut

Figure 4.11 Insert the Wire into the Connector Cap nut and contact pin

4. Installation

Before connection, please make sure the polarity of the output voltage of PV array

matches the“DC+”and “DC-”symbols.

Maximum 600Voc for

CSI-7KTL1P-GI-FL CSI-8KTL1P-GI-FL

CSI-9KTL1P-GI-FL CSI-10KTL1P-GI-FL

Please don’t connect PV array positive or negative pole to the ground, it could

cause serious damages to the inverter

Figure 4.8 DC+ Connector Figure 4.9 DC- Connector

Please use approved DC cable for PV system.

Cable type

4.0~6.0

Cross section

Range

Industry generic PV cable

（model: P V1-F）

Recommended

value

4.0（12AWG）

（12~10AWG）

.15.

.14.

Table 4.1 DC cable

Figure 4.13 Connector with Cap nut Screwed on

Crimping plier

Otros manuales para CSI Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Inversor de CanadianSolar

CanadianSolar

CanadianSolar CSI-5K-S22002-E Manual de usuario

CanadianSolar

CanadianSolar CSI-3K-S22002-E Manual de usuario

CanadianSolar

CanadianSolar CSI SERIES Manual de usuario

CanadianSolar

CanadianSolar CSI-75K-T40001-E Manual de usuario

CanadianSolar

CanadianSolar CSI-50K-T400GL03-E Manual de usuario

CanadianSolar

CanadianSolar CSI SERIES Manual de usuario

CanadianSolar

CanadianSolar CSI-125K-T600GL02-E Manual de usuario

CanadianSolar

CanadianSolar CSI Series Manual de usuario

CanadianSolar

CanadianSolar CSI-7K-S22002-ED Manual de usuario

CanadianSolar

CanadianSolar CSI-125-T600GL02-U Manual de usuario

CanadianSolar

CanadianSolar CSI-25K-T220GL03-E Manual de usuario

CanadianSolar

CanadianSolar CSI-25K-T480GL01-UB Manual de usuario

CanadianSolar

CanadianSolar CSI-700TL1P-GI-FL Manual de usuario

CanadianSolar

CanadianSolar CSI Series Manual de usuario

CanadianSolar

CanadianSolar CSI-100K-T400GL02-E Manual de usuario

CanadianSolar

CanadianSolar CSI-3K-S22002-ED Manual de usuario

CanadianSolar

CanadianSolar CS1V-MS Manual de usuario

CanadianSolar

CanadianSolar CSI-40K-T4001A-E Manual de usuario

CanadianSolar

CanadianSolar CSI-25KTL-GS-FLB Manual de usuario

CanadianSolar

CanadianSolar CSI-75K-T40001-E Manual de usuario

CanadianSolar

CanadianSolar CSI-100K-T400 Manual de usuario

CanadianSolar

CanadianSolar CSI-75K-T480GL03-U Manual de usuario

CanadianSolar

CanadianSolar CSI-75K-T480GL02-U Manual de usuario

CanadianSolar

CanadianSolar CSI-7K-S22003-E Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario