Campbell CC640 Manual de usuario
CC640
Digital Camera
Operating Manual
Issued 9.1.08
Copyright ©2005 Campbell Scientific (Canada) Corp..
Printed under Licence by Campbell Scientific Ltd.
CSL 573
Guarantee
This equipment is guaranteed against defects in materials and
workmanship. This guarantee applies for twelve months from date of
delivery. We will repair or replace products which prove to be defective
during the guarantee period provided they are returned to us prepaid. The
guarantee will not apply to:
•Equipment which has been modified or altered in any way without the
written permission of Campbell Scientific
•Batteries
•Any product which has been subjected to misuse, neglect, acts of God
or damage in transit.
Campbell Scientific will return guaranteed equipment by surface carrier
prepaid. Campbell Scientific will not reimburse the claimant for costs
incurred in removing and/or reinstalling equipment. This guarantee and
the Company’s obligation thereunder is in lieu of all other guarantees,
expressed or implied, including those of suitability and fitness for a
particular purpose. Campbell Scientific is not liable for consequential
damage.
Please inform us before returning equipment and obtain a Repair Refer-
ence Number whether the repair is under guarantee or not. Please state the
faults as clearly as possible, and if the product is out of the guarantee
period it should be accompanied by a purchase order. Quotations for re-
pairs can be given on request.
When returning equipment, the Repair Reference Number must be clearly
marked on the outside of the package.
Note that goods sent air freight are subject to Customs clearance fees
which Campbell Scientific will charge to customers. In many cases, these
charges are greater than the cost of the repair.
Campbell Scientific Ltd,
Campbell Park, 80 Hathern Road,
Shepshed, Loughborough, LE12 9GX, UK
Tel: +44 (0) 1509 601141
Fax: +44 (0) 1509 601091
Email: support@campbellsci.co.uk
www.campbellsci.co.uk
Contents
PDF viewers note: These page numbers refer to the printed version of this document. Use
the Adobe Acrobat® bookmarks tab for links to specific sections.
1. Specifications .............................................................. 1
2. Introduction.................................................................. 2
2.1 Connecting................................................................................................2
2.2 Configuring...............................................................................................3
2.3 Operating..................................................................................................4
2.4 Retrieving Images.....................................................................................4
2.5 Additional Reference Material..................................................................4
2.6 CC640 Quick Check List..........................................................................4
3. Camera Hardware Description ................................... 5
3.1 Terminal Block Connections...................................................................5
3.2 Power Switch............................................................................................6
3.3 Snap Button ..............................................................................................6
3.4 Set-up Button............................................................................................6
3.5 Video Output ............................................................................................6
3.6 External I/O Connector.............................................................................7
3.7 LED (Green).............................................................................................7
3.8 Compact Flash Memory Card...................................................................8
3.8.1 Firmware Update From Memory Card..........................................8
4. Communications ......................................................... 9
4.1 PakBus Communications..........................................................................9
4.2 RS-232 Port ..............................................................................................9
4.3 CS I/O Port .............................................................................................13
4.4 RS-485 Port ............................................................................................14
5. Device Configuration Utility ..................................... 14
6. Operational Description............................................ 18
6.1 Self Timed Mode....................................................................................18
6.2 External Trigger Mode ......................................................................... `18
7. Image Quality ............................................................. 19
7.1 Lighting conditions.................................................................................19
7.2 Night Time Images .................................................................................19
7.3 Date and Time Stamp .............................................................................19
7.4 JPEG Compression.................................................................................20
i
8. Lens ............................................................................ 21
8.1 Lenses and Field of View.......................................................................21
8.2 Focus and Zoom Adjustment..................................................................22
8.2.1 Temperature Variations and Focus..............................................22
8.3 Lens Filter...............................................................................................23
9. Maintenance............................................................... 23
9.1 Lithium Battery.......................................................................................23
9.2 Lens Cleaning.........................................................................................24
10. Set-up and Interface Guide .....................................24
10.1 Trigger Mode........................................................................................24
10.1.1 External Trigger........................................................................24
10.1.2 Self-Timed Trigger...................................................................24
10.1.3 Combination of External and Self-Timed Triggers..................24
10.2 Communications...................................................................................25
10.2.1 Communications Disabled........................................................25
10.2.2 CS I/O Communications...........................................................25
10.2.3 RS-232 Communications..........................................................25
10.2.4 RS-485 Communications..........................................................26
10.2.5 Concurrent Communications....................................................26
11. Power Calculations and Timings ...........................26
11.1 Standalone Operation ...........................................................................26
11.2 Operation with Communications..........................................................27
12. CR10X Interface Guide ............................................ 29
12.1 CR10X Datalogger Requirements........................................................29
12.2 CR10X Memory Allocation .................................................................29
12.3 CR10X PakBus Settings.......................................................................29
12.4 CR10X *D15 Settings..........................................................................30
12.5 CR10X Multiple Cameras....................................................................30
12.6 CR10X Connections.............................................................................30
13. CR1000 Interface Guide .......................................... 30
13.1 CR1000 Memory Set-up.......................................................................30
13.2 CR1000 Files Manager.........................................................................31
13.3 CR1000 CS I/O Communications ........................................................31
13.4 CR1000 RS-232 Port Communications................................................31
13.5 CR1000 COM Port (control port) Communications.............................31
14. Remote Image Retrieval ..........................................32
14.1 LNCMD.EXE.......................................................................................32
14.2 Using Loggernet File Control...............................................................33
14.3 Task Set-up / LNCMD.EXE.................................................................34
15. Installation................................................................37
15.1 Enclosures.............................................................................................37
15.2 Mounting Holes....................................................................................37
ii
Appendices
A. Camera Enclosures ................................................ A-1
B. Quick Set-up and Test Procedure CC640
In Standalone Mode................................................. B-1
Figures
1. CC640 Camera............................................................................................2
2. Terminal Block Position and Layout..........................................................5
3. Camera to Datalogger RS-232 port (DCE) connection ..............................9
4. Using C2006 adapter board to carry RS-232 TX and RX on multi-
conductor cable.........................................................................................10
5. RS-232 wiring using C2006 boards with multi-conductor cable..............11
6. Connections for Configuration.................................................................12
7. Camera connections for CS I/O port operation ........................................13
8. Device Configuration Utility Screen ........................................................15
9. Illustration of Time Stamp Banner ...........................................................20
10. Lens and Filter........................................................................................23
11. Task Set-up.............................................................................................35
12. Task using add after to collect images after scheduled call....................36
13. Mounting Holes......................................................................................37
A-1 Enc 17/19 Mounting........................................................................... A-1
A-1a Enc 16/18 Mounting......................................................................... A-2
A-2 CC4718 Enclosure with mounting location of optional Serial
Interface Board (C2006)..................................................................... A-3
A-3 Camera on CC4718 Mounting Plate................................................... A-4
A-4 CC4718 bottom view.......................................................................... A-4
A-5 Vertical Pipe Mount ........................................................................... A-5
A-6 Horizontal Pipe Mount....................................................................... A-5
Tables
1. Recommended cable colour connections....................................................3
2. Explanation of configuration settings.......................................................16
3. Standalone operation power usages..........................................................27
4. RS-232 Port File Transfer Times and power usage per image.................28
5. CR10XPB CS I/O File Transfer Times ....................................................28
6. CR1000 CS I/O File Transfer Times........................................................28
iii
CC640 Digital Camera
1. Specifications
Power Supply
Operating: 9-15 VDC 250 mA Max
Quiescent: 250 uA typical
Operating Temperature -40°C to +70°C
Ext. Input Signal
Logic Low Level: 0 - 0.7 VDC (-12VDC Absolute Min)
Logic High Level: 4 – 15 VDC (15VDC Absolute Max)
RS-485
Max. BAUD Rate: 230.4 KBAUD
RS-232
Max. BAUD Rate: 230.4 KBAUD
CS I/O
Max. BAUD Rate: 76.8 KBAUD
CSDC addresses: 7 or 8
Memory Card Interface:
Type: Compact Flash
File System: FAT16
File Type: JPEG
Size: Recommended 512 Mb or less
Clock Accuracy +/- 1 Minute/Year (0°C to 40°C)
+/- 4 Minutes/Year (-40°C to 70°C)
Lens
Mount: CS-Type
IRIS: DC Compatible
Resolution 640 x 480 (307,200 pixels)
640 x 504 (with Time Stamp banner)
Dimensions
Length: 235 mm (9.25 inches) With Lens
Width: 110 mm (4.33 inches)
Height: 64 mm (2.52 inches)
Weight: 0.9 kg (2.0 lbs)
1
CC640 Digital Camera
2. Introduction
The CC640 digital camera was designed to meet the stringent operational
requirements necessary for remote battery powered installations. The CC640 has a
very low quiescent power draw and can operate over a wide temperature range.
The camera contains a compact flash memory card interface that turns the camera
into a powerful image logger. The combination of JPEG compression and memory
card storage enables the CC640 to store over 10,000 images.
The CC640 can operate in a stand-alone mode with image acquisitions triggered
by the cameras own precision real time clock. Image acquisitions can also be
triggered by an externally applied digital signal.
For Quick Set-up and Test Procedure in Standalone Mode – refer to Appendix B.
Figure 1 CC640 Camera
2.1 Connecting
The camera should be connected to the datalogger and power supply using the
wiring recommendations in Table 1, Cable Colour Connections. The wiring is
based on the use of the recommended FIN6COND cable supplied by Campbell
Scientific (Canada) Corp. (CSC). The colour connections may differ if other
cables are used.
It is essential that the Ground cable be connected first when wiring
NOTE the camera to the datalogger or the power supply.
2
Otros manuales para CC640
2
Tabla de contenidos
Otros manuales de Cámara digital de Campbell
