Cambridge Audio CXR200 ZONE 2 Manual de usuario

HDMI CONNECTION TO ZONE 2

PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES. .....2

HDMI CONNECTION TO ZONE 2

PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE. .....3

PRE-OUT CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES. .....................4

PRE-OUT CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................5

SPEAKER CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES. .....................6

SPEAKER CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................7

TABLE OF CONTENTS

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: Press and hold the Zone 2 button, then press the Standby button.

– Using the Cambridge Connect app.

– On the front panel: Press the Zone 2 button (Zone 2 will be shown on the display), then press

the Standby button.

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On.

2Setting the Zone 2 Source to ‘Follow Main Zone’ will ensure that any video/audio (multi-

channel or stereo) that is playing in the Main Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray movie) playing in the Main Zone will be sent to the

Zone 2 TV as a 2CH PCM (stereo) downmix when Follow Main is selected.

Notes:

• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and

video. The TV must have speakers.

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2. This means that any source can

be heard in Zone 2.

ZONE 2 HDMI CONNECTION TO ZONE 2

PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES.

HDMI

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2:

– Using the remote: Press and hold the Zone 2 button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button (Zone 2 will be shown on the display), then press the

Standby button

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On

2The Zone 2 source can be selected using the remote control, front panel, app and the Zone

2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source that is the dierent from the main zone, the ‘raw’

audio and video will be sent into Zone 2, as output by the source. The audio is not down-mixed

to stereo in Zone 2 if you are not using the Follow Main feature.

If the selected Zone 2 Source has a stereo audio signal (eg. 2.0CH satellite signal/FM/Stream

Magic) the Zone 2 TV will be able to play both the audio and video signal.

If the selected Zone 2 Source has a multi-channel audio signal (eg. BD player/5.1 satellite signal)

the Zone 2 TV must be able to play/decode multi-channel HDMI audio, otherwise no sound will

be heard in this case.

Notes:

• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and

video. The TV must have speakers.

• In Zone 2, if you want to watch/listen to a dierent source to the Main Zone, then we recommend

that the Zone 2 TV is able to play/decode multi-channel HDMI audio. If not, then for multi-

channel audio sources, only the picture will be displayed in Zone 2.

• The TV source (ARC) is only available in Zone 2 when set to Follow Main.

ZONE 2 HDMI CONNECTION TO ZONE 2

PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE.

HDMI

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: Press and hold the Zone 2 button, then press the Standby button.

– Using the Cambridge Connect app.

– On the front panel: Press the Zone 2 button (Zone 2 will be shown on the display), then press

the Standby button.

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On.

2Setting the Zone 2 Source to ‘Follow Main Zone’ will ensure that any audio (multi-channel or

stereo) that is playing in the Main Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray movie) playing in the Main Zone will be sent to Zone

2 as a 2CH PCM (stereo) downmix when Follow Main is selected

Notes:

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2. This means that any source can

be heard in Zone 2.

• It is not possible to congure the second subwoofer output for Zone 2 use.

ZONE 2 PRE-OUT CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES.

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

ZONE 2

Up to 7.2 speaker connection

HDMI

MAIN ZONE

1Switch on Zone 2:

– Using the remote: Press and hold the Zone 2 button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button (Zone 2 will be shown on the display), then press the

Standby button

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On

2The Zone 2 source can be selected using the remote control, front panel, app and the Zone

2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source that is dierent from the main zone, only sources

with a 2CH PCM (stereo) audio signal are output to Zone 2.

If the selected Zone 2 Source has a multi-channel audio signal (eg. BD player/5.1 satellite signal)

this cannot be output to Zone 2 if the Follow Main feature is not being used.

Notes:

• In Zone 2, to watch/listen to a dierent source to the Main Zone, then the Zone 2 source must

be stereo.

• The FM/AM Tuner and Stream Magic Sources are stereo and can always be played in Zone 2.

If a source is set to use audio from an analogue input, or a digital input as 2CH PCM, then this

can also be played in Zone 2 whilst a dierent source is being played in the Main Zone.

• A source using audio from HDMI or a digital input must be set to 2CH PCM to be played in Zone

2 whilst a dierent source is playing in the Main Zone

• When Zone 2 is On, the HDMI 2 output is also set to Zone 2. It is not possible to use the twin

HDMI outputs for dual (mirrored) displays when Zone 2 Power is On (unless using the Follow

Main feature).

• It is not possible to congure the second subwoofer output for Zone 2 use.

• The TV source (ARC) is only available in Zone 2 when set to Follow Main.

PRE-OUT CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE.

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: press and hold the Zone 2

button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button

(Zone 2 will be shown on the display), then

press the Standby button

– In the Zone 2 Settings menu within the OSD:

Zone 2 Power On

2Ensure the Back Amp channels are set to

‘Zone 2’ in the Speaker Setup.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Speaker Configuration

Auto Setup

Unit

SW Selection

Back Amp Configuration

►

Metres

Subwoofer1+Subwoofer2

Zone 2

3Setting the Zone 2 Source to ‘Follow Main

Zone’ will ensure that any audio (multi-

channel or stereo) that is playing in the Main

Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray

movie) playing in the Main Zone will be sent to

Zone 2 as a 2CH PCM (stereo) downmix when

Follow Main is selected.

Notes:

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2.

• When congured for Zone 2, the back amp channels cannot be used for bi-amping or 7.2 in the

main zone. 5.2 speaker channels is the maximum speaker conguration in the main zone when

using the zone 2 speaker output.

• It is not possible to congure the second subwoofer output for Zone 2 use.

ZONE 2 SPEAKER CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES.

Up to 5.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: press and hold the Zone 2

button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button

(Zone 2 will be shown on the display), then

press the Standby button

– In the Zone 2 Settings menu within the OSD:

Zone 2 Power On

2Ensure the Back Amp channels are set to

‘Zone 2’ in the Speaker Setup.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Speaker Configuration

Auto Setup

Unit

SW Selection

Back Amp Configuration

►

Metres

Subwoofer1+Subwoofer2

Zone 2

3The Zone 2 source can be selected using

the remote control, front panel, app and the

Zone 2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source

that is dierent from the main zone, only

sources with a 2CH PCM (stereo) audio signal

are output to Zone 2.

If the selected Zone 2 Source has a multi-

channel audio signal (eg. BD player/5.1 satellite

signal) this cannot be sent to Zone 2 if the

Follow Main feature is not being used.

ZONE 2

Up to 5.2 speaker connection

HDMI

MAIN ZONE

SPEAKER CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE.

Notes:

• In Zone 2, to watch/listen to a dierent source

to the Main Zone, the Zone 2 source must be

stereo.

• The FM/AM Tuner and Stream Magic Sources

are stereo and can always be played in

Zone 2. If a source is set to use audio from

an analogue input, or a digital input as 2CH

PCM, then this can also be played in Zone 2

whilst a dierent source is being played in the

Main Zone.

• A source using audio from HDMI or a digital

input must be set to 2CH PCM to be played

in Zone 2 whilst a dierent source is playing

in the Main Zone.

• When congured for Zone 2, the back amp

channels cannot be used for bi-amping or 7.2

in the main zone. 5.2 speaker channels is the

maximum speaker conguration in the main

zone when using the zone 2 speaker output.

• It is not possible to congure the second

subwoofer output for Zone 2 use.

• The TV source (ARC) is only available in Zone

2 when set to Follow Main.

• When Zone 2 is On, the HDMI 2 output is also

set to Zone 2. It is not possible to use the twin

HDMI outputs for dual (mirrored) displays

when Zone 2 Power is On (unless using the

Follow Main feature).

Tabla de contenidos

Otros manuales de Amplificador de Cambridge Audio

Cambridge Audio

Cambridge Audio Azur 540A V2 Manual de usuario

Cambridge Audio

Cambridge Audio EDGE M Manual de usuario

Cambridge Audio

Cambridge Audio EDGE M Manual de usuario

Cambridge Audio

Cambridge Audio azur 840A Manual de usuario

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manual de usuario

Cambridge Audio

Cambridge Audio AZUR 651A Manual de usuario

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manual de usuario

Cambridge Audio

Cambridge Audio azur 350A Manual de usuario

Cambridge Audio

Cambridge Audio Azur 840E Manual de usuario

Cambridge Audio

Cambridge Audio azur 840A Guía de referencia rápida

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Guía del administrador

Cambridge Audio

Cambridge Audio 851E Manual de usuario

Cambridge Audio

Cambridge Audio azur 840A Manual

Cambridge Audio

Cambridge Audio Alva Solo Manual de usuario

Cambridge Audio

Cambridge Audio Azur 340A Manual de usuario

Cambridge Audio

Cambridge Audio Azur 540A V2 Manual de usuario

Cambridge Audio

Cambridge Audio AZUR 840A V2 Guía del administrador

Cambridge Audio

Cambridge Audio 851D Manual de usuario

Cambridge Audio

Cambridge Audio Azur 540A Manual de usuario

Cambridge Audio

Cambridge Audio AZUR 351A Manual de usuario

Cambridge Audio

Cambridge Audio AZUR 550A Manual de usuario

Cambridge Audio

Cambridge Audio CXA60 Manual de usuario

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manual de usuario

Cambridge Audio

Cambridge Audio EDGE M Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario