
Part#BM110- Front Buckets
Step #1- Prepare Seats
Remove headrest from mounts and set
them aside.
Step #2- Install Backrest
Step #3- Install Backrest
Step #4- Install Cushion
Place the cover onto the cushion, matching its
contours and cutouts. Tuck in the top, sending
the straps to the back.
Step #5- Install Cushion
Pull the straps from the back, and
buckle them accordingly. Make sure
to pull on the straps tightly, so the
cover is well fitted. Also tuck in all
sides of the cushion.
Step #6- Install Headrest
Place the cover over the headrest, matching
its contours and cutouts. Make sure the
solid piece is facing the front. Secure the fit
by attaching the velcros together.
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or
stained covers hand wash
with mild detergent and air
dry. NEVER MACHINE
WASH OR DRY. The
material may come apart
from lamination or
foaming. This will also void
any warranty.***
Place the cover over
the backrest,
matching its
contours and
cutouts. Tuck in the
top, sending the
velcro to the back.
Also tuck in the flap,
located on the side
of the backrest.
Make sure to tuck in
the “X” cutouts.
Pull the velcro
through the
back, and
secure the fit by
attaching the
velcros
together.
Once all covers
have been
installed adjust
the seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you
are ready to enjoy
your CalTrend
Seat Covers
MAKE SURE THE
AIR FLAP IS FACING
THE DOOR.