Callaway LS Manual de usuario

CALLAWAY LS LASER RANGEFINDER MANUAL

While looking through the Eye

Piece, PRESS & RELEASE the

Power Button. The rangender

is now powered on.

FOR MORE SUPPORT VISIT: www.callawaytag.com/product-support

HOW TO USE

To focus/increase clarity, use

the Diopter Adjustment by

turning the Eye Piece.

Continue looking through the Eye

Piece, aim the Zero-In Aiming Square

at your intended target & PRESS the

Power Button. The laser will re and

the Laser Indicator Box will appear

around the Zero-In Aiming Square.

The measurement will be displayed at

the top of the LCD display.

164Y

RANGEFINDER DIAGRAM

LCD DISPLAY

A. Zero-In Aiming Square

B. Laser Indicator Box

C. P.A.T. Mode Indicator

D. Pulse Indicator

E. Distance

F. Unit of Measure

G. Low Battery

H. Slope Adjusted Distance

164Y

A. Eye Piece

B. Diopter

Adjustment

C. Power Button

D. Mode Button

E. Battery Door

P.A.T. with Pulse Technology - P.A.T. Mode is best used

when measuring the distance to a Flagstick or smaller

objects. Device will provide a short vibration to conrm

that the laser has locked on to the pin. To toggle between

Standard and P.A.T Mode, quickly PRESS the Mode

Button once while device is powered on. When P.A.T.

Mode is activated, the agstick icon will appear on the

left side and the Pulse icon will appear on the right side

of the LCD display (Fig. B).To deactivate Pulse, HOLD the

Mode Button for 5 seconds.

MEASUREMENT MODES

1. Standard - Standard Mode is recommended when

measuring distances to larger objects. (Fig. A)

3. Scanning - To measure distances to multiple targets

in succession, PRESS and RELEASE Power Button

to power on. Then HOLD Power Button, the Laser

Indicator Box will ash and the laser will continuously

re. Measurements will change as you scan the

landscape and change targets.

NOTE: While scanning in P.A.T. Mode, the measurement will only

change when a shorter distance is measured. This is useful when

measuring the distance to a agstick when there are trees or other

objects in the background.

4. To turn Slope Measurement On/O󰀨:

NOTE: The slope measurement & adjusted yardage

will appear in the bottom right corner of the LCD

display when the function is enabled.

1. With the unit o󰀨, HOLD the Mode Button for three

seconds until the slope function appears in the bottom

right corner of the LCD display. Once the slope function

appears, RELEASE the Mode Button.

2. Repeat this process if you need to turn The Slope

Measurement o󰀨. The Slope function will not appear

unless enabled.

5. Unit of Measure - To change the unit of measure from

Yards to Meters, start with the device powered o󰀨. Then

HOLD the Mode Button for 7 seconds in P.A.T. Mode

(5 seconds in Standard Mode) The unit of measure

is indicated by a “Y” or “M” shown directly to the right

of the distance displayed.

Caution: Use of controls or adjustments or performance of procedures other than those

specied herein may result in hazardous radiation exposure.

Otros manuales para LS

Tabla de contenidos

Otros manuales de Instrumento de medición de Callaway

Callaway

Callaway 300 Manual de usuario

Callaway

Callaway 350TL Manual de usuario

Callaway

Callaway EZ Manual de usuario

Callaway

Callaway 200 S Manual de usuario

Callaway

Callaway CSi PRO Manual de usuario

Callaway

Callaway 350TL Manual de usuario

Callaway

Callaway XLS Manual de usuario

Callaway

Callaway ProXS Manual de usuario

Callaway

Callaway Micro Pro Manual de usuario

Callaway

Callaway TOUR-S Manual de usuario

Callaway

Callaway 300 PRO Manual de usuario

Callaway

Callaway Micro Manual de usuario

Callaway

Callaway 250+ Manual de usuario

Callaway

Callaway LS Manual de usuario

Callaway

Callaway XLS Manual de usuario

Callaway

Callaway CSi PRO Manual de usuario

Callaway

Callaway 300 PRO Manual de usuario

Callaway

Callaway Micro Pro Manual de usuario

Callaway

Callaway Hybrid Manual de usuario

Callaway

Callaway 200 S Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario