BZB Gear BG-EXH-70C4 Manual de usuario

BG-EXH-70C4

18Gbps HDBaseT Extender (70m) with ARC

User Manual

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

TABLE OF CONTENTS

Statement 4

Safety Precaution 4

Introduction 5

Features 5

Packing List 5

Speciﬁcations 6

Operation Controls and Functions 7

Transmitter Panel 7

Receiver Panel 8

IR Pin Deﬁnition 9

Application Example 10

Tech Support 11

Warranty 11

Mission Statement 11

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Statement

Please read these instructions carefully before connecting, operating, or conﬁguring this

product. Please save this manual for future reference.

Safety Precaution

●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion

during transportation, storage, and installation.

●The housing of this product is made of organic materials. Do not expose to any liquid,

gas, or solids which may corrode the shell.

●Do not expose the product to rain or moisture.

●To prevent the risk of electric shock, do not open the case. Installation and maintenance

should only be carried out by qualiﬁed technicians.

●Do not use the product beyond the speciﬁed temperature, humidity, or power supply

speciﬁcations.

●This product does not contain parts that can be maintained or repaired by users.

Damage caused by dismantling the product without authorization from BZBGEAR is not

covered under the warranty policy.

●Installation and use of this product must strictly comply with local electrical safety

standards.

●This product contains sensitive electrical components that may be damaged by

electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection

systems is highly recommended in order to protect and extend the life of your

equipment.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Introduction

The BG-EXH-70C4 is an 18Gbps HDBaseT extender that extends HDMI, bi-directional IR

control, ARC, and RS-232 control signals to a distance of up to 70m / 230ft over a single

CAT5e/6 cable. The HDMI signal is converted to standard HDBaseT, and transmitted using

a LAN cable. The bi-directional IR signal pass-through function from the remote easily

controls signal source or display devices. The device also supports ARC and PoC. Video

resolution is up to 4K2K @60Hz.

Features

●HDMI 2.0b and HDCP 2.2 compliant

●18Gbps video bandwidth

●Video resolution up to 4K2K@60Hz RGB/YCBCR 4:4:4

●The transmission extension distance is up to 70m / 230ft via a CAT5e/6 cable

●Bi-directional IR and RS-232 control signal pass-through

●ARC functionality

●Audio formats supported: Dolby 5.1, DTS 5.1, PCM2.0, etc.

●Advanced EDID management

●PoC (Power over Cable) functionality

●Compact design for easy and ﬂexible installation

Packing List

• 1 x 18Gbps HDMI extender (transmitter)

• 1 x 18Gbps HDMI extender (receiver)

• 1 x IR Blaster cable (1.5 meters)

• 1 x IR Wideband Receiver cable (1.5 meters)

• 2 x 3pin-3.81mm Phoenix Connectors (male)

• 4 x Mounting Ears

• 8 x Machine Screws

• 1 x 24V/1A Locking Power Adapter

• 1 x User Manual

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Speciﬁcations

Technical

HDMI Compliance

HDMI 2.0b

HDCP Compliance

HDCP 2.2

Video Bandwidth

18Gbps

Video Resolution

Up to 4K2K@60Hz RGB/YCBCR 4:4:4

IR Level

5Vp-p

IR Frequency

Wideband 20K-60KHz

Transmission Distance

70m via a single CAT5e/6 cable

Color Space

RGB, YCbCr 4:4:4, YCbCr 4:2:2

Color Depth

8-bit, 10-bit, 12-bit (1080P)

8-bit (4K60)

8-bit, 10-bit, 12-bit (4K24/30)

HDR

HDR, HDR10, HDR10+, Dolby Vision, HLG

Audio Formats

HDMI: LPCM 7.1CH, Dolby True HD, and DTS-HD Master Optical: Dolby 5.1, DTS 5.1, PCM 2.0

Connection

Transmitter

Input: 1× HDMI IN [Type A, 19-pin female]

Output: 1× HDBT OUT [RJ45] / 1×SPDIF OUT

Control:

1× RS-232 [3pin-3.81mm Phoenix connector]

1× SERVICE [Micro-USB jack]

1× IR IN [3.5mm Stereo Mini-jack]

1× IR OUT [3.5mm Stereo Mini-jack]

Receiver

Input: 1× HDBT IN [RJ45] / 1×SPDIF IN

Output: 1× HDMI OUT [Type A, 19-pin female]

Control:

1× RS-232 [3pin-3.81mm Phoenix connector]

1× SERVICE [Micro-USB jack]

1× IR IN [3.5mm Stereo Mini-jack]

1× IR OUT [3.5mm Stereo Mini-jack]

Mechanical

Housing

Metal Enclosure

Color

Black

Dimensions

Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H)

Weight

Transmitter: 235 g, Receiver: 239 g

Power Supply

DC 24V/1A;

Supports bi-directional Power over Cable (PoC) functionality

Power Consumption

9.6 W (max)

Operating Temperature

0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature

-20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity

20~90% RH (non-condensing)

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Operation Controls and Functions

TRANSMITTER PANEL

No.

Name

Function Description

Power LED

The red LED will illuminate when the transmitter is powered on.

EDID DIP

switch

Used for audio EDID setting (COPY on by default).

COPY: Copy the EDID of the HDMI OUT port of Receiver.

STD: Default 1080P 2CH

SERVICE

Firmware update port.

DC 24V

DC 24V/1A power input port.

Note: The extender supports PoC functionality. Either the transmitter or receiver must be connected to

a 24V/1A power supply. The other does not require a power supply.

HDBT OUT

RJ45 port to connect to the HDBT IN port of the receiver using a CAT5e/6 cable.

Link Signal

Indicator

(Green)

Solid: The transmitter and receiver have a good connection status.

Flashing: The transmitter and receiver have a poor connection status.

Dark: The transmitter and receiver are not connected.

Data Signal

Indicator

(Orange)

Solid: HDMI signal with HDCP.

Flashing: HDMI signal without HDCP.

Dark: No HDMI signal.

HDMI IN

HDMI signal input port. Connect to the HDMI source device using an HDMI cable.

SPDIF OUT

Optical ﬁber audio signal output port.

IR IN

Connect to the IR receiver cable. The IR receive signal will emit to the IR OUT port of the receiver.

IR OUT

Connect to the IR blaster cable. The IR will emit a signal from the IR IN port of the receiver.

RS-232

3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass

between the transmitter and receiver.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

RECEIVER PANEL

No.

Name

Function Description

Power LED

The red LED will illuminate when the transmitter is powered on.

AUDIO DIP

switch

The extender's ARC function is automatically enabled when the HDMI OUT port is connected to a

source device with ARC functionality (e.g. ampliﬁer or soundbar):

Switch to “HDMI ARC”: The audio returned from the HDMI OUT port of the receiver will be output

through the HDMI IN port and SPDIF OUT port of the transmitter.

Switch to “SPDIF IN”: The audio returned from the SPDIF IN port of the receiver will be output

through the HDMI IN port and SPDIF OUT port of the transmitter.

The ARC function of the extender is disabled when the HDMI IN port is connected to a common

source device. The audio from the SPDIF IN port of the receiver will then be output through the SPDIF

OUT port of the transmitter.

SERVICE

Firmware update port.

DC 24V

DC 24V/1A power input port.

Note: The extender supports PoC functionality. Either the transmitter or receiver must be connected to

a 24V/1A power supply. The other does not need a power supply.

HDBT IN

RJ45 port to connect to the HDBT OUT port of the transmitter using a CAT6/6a cable.

Link Signal

Indicator

(Green)

Solid: The transmitter and receiver have a good connection status.

Flashing: The transmitter and receiver have a poor connection status.

Dark: The transmitter and receiver are not connected.

Data Signal

Indicator

(Orange)

Solid: HDMI signal with HDCP.

Flash: HDMI signal without HDCP.

Dark: No HDMI signal.

HDMI OUT

HDMI signal output port. Connect to the HDMI display device using an HDMI cable.

SPDIF IN

Optical ﬁber audio signal input port.

IR IN

Connect to the IR receiver cable. The IR signal will emit to the IR OUT port of the transmitter.

IR OUT

Connect to IR blaster cable. The IR signal is from the IR IN port of the transmitter.

RS-232

3-pin Phoenix connector for RS-232 command transmission.

The RS-232 command will pass-through between the transmitter and receiver.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

IR PIN DEFINITION

IR Receiver and Blaster Descriptions:

Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission

distance is 0-5 meters.

When the angle between the IR receiver and the remote control is ± 90 °, the transmission

distance is 0-8 meters.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9

BZBGEAR BG-EXH-70C4 PRODUCT MANUAL

Application Example

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10

Tabla de contenidos

Otros manuales de Extensor de BZB Gear

BZB Gear

BZB Gear BZ-18HBT-B100 Manual de usuario

BZB Gear

BZB Gear BG-USB-LR100 Manual de usuario

BZB Gear

BZB Gear BG-EXH-70C3 Manual de usuario

BZB Gear

BZB Gear BG-HDKVM-50 Manual de usuario

BZB Gear

BZB Gear BG-EXH-100C5 Manual de usuario

BZB Gear

BZB Gear BG-UHD-18GFE Manual de usuario

BZB Gear

BZB Gear BG-EXD-150C Manual de usuario

BZB Gear

BZB Gear BG-HDKVM-50 Manual de usuario

BZB Gear

BZB Gear BG-18HBT-B100 Manual de usuario

BZB Gear

BZB Gear BG-UHDKVM-100 Manual de usuario

BZB Gear

BZB Gear BG-EXH-100C6 Manual de usuario

BZB Gear

BZB Gear BG-EXHKVM-70C Manual de usuario

BZB Gear

BZB Gear BG-EXHOC Manual de usuario

BZB Gear

BZB Gear BG-Air4Kast Manual de usuario

BZB Gear

BZB Gear BG-EXH-50C Manual de usuario

BZB Gear

BZB Gear BG-USB-LR100 Manual de usuario

BZB Gear

BZB Gear BZ-USB2.0-SR Manual de usuario

BZB Gear

BZB Gear BG-PSC8X2-REC Manual de usuario

BZB Gear

BZB Gear BG-UHD-18GFE Manual de usuario

BZB Gear

BZB Gear BZB-EXH-50 Manual de usuario

BZB Gear

BZB Gear BZB-EXHD-TX Manual de usuario

BZB Gear

BZB Gear BG-FES12G Manual de usuario

BZB Gear

BZB Gear BG-AUD-TCS Manual de usuario

BZB Gear

BZB Gear BG-4K-VP44PRO Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario