BZB Gear BG-VOP-CB Manual de usuario
BG-VOP-CB
Smart Controller for BZBGEAR IPGEAR-4K AV over IP System
User Manual
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2
BZBGEAR BG-VOP-CB PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Packing List 6
Connection Diagram 6
Specifications 6
Panel Descriptions 7
System Requirements 7
System Setup 8
Video Wall Setup 12
Bezel Correction 13
On Screen Display (OSD) 15
Event 16
Setup 16
Transmitter Setup 17
Receiver Setup 18
Troubleshooting 19
Tech Support 20
Warranty 20
Mission Statement 20
Copyright 20
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●Unplug this device during lightning storms
●Clean only with a soft dry microfiber cloth.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
●Only use accessories specified by the manufacture
●Product specifications may be subject to technical upgrades without further notice
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Introduction
The BZBGEAR IPGEAR-4K AV over IP (AVoIP) system is composed of three components.
The first is the BG-VOP-CB which is the controller for the system. Next, at least two
BG-VOP-MT transceivers are needed which function as either transmitter or receiver.
The BG-VOP-CB Smart Controller for the IPGEAR-4K system provides central management
and real-time monitoring of the BG-VOP-MT AV over IP transceivers. This highly expandable
system can manage up to 1024 transceivers. The intuitive web-based interface allows users
to quickly change sources using drag and drop commands. The interface also provides
quick and easy creation and management of video walls, custom on screen displays (OSD)
including text and graphics, and alerts for system events to keep administrators up to date.
The BG-VOP-MT is a HDMI 2.0 over IP multicast transceiver with video wall & PoE support.
It can boost audio/video transmission distances up to 120m (396ft) in UHD 4K2K. With
cost-effective ethernet cables, users can easily extend UHD sources such as DVD players,
Blu-ray Disc players, gaming consoles, PCs, and any other HDMI source to any HDMI
display. In addition, BG-VOP-MT is HDCP compliant, and supports PoE, IR, and RS-232
pass-through.
By transmitting the A/V signal over the local area network the BG-VOP-MT makes it easy to
add a source or display to your system anywhere there is an active ethernet connection. To
provide more flexibility for installations, the BG-VOP-MT can work as either a transmitter or
a receiver with the flip of a switch. When combined with broadcasting management
software and a Gigabit Ethernet network switch (supporting IGMP), the BG-VOP-MT is a
complete UHD video broadcasting solution for digital signage. The transceivers can function
in Point-to-Point, Point-to-Many, or Multicast scenarios. Multicasting requires a Managed
Gigabit Ethernet Switch with 802.1Q VLAN functionality to allow multiple video sources.
Features
●Central Control for the IPGEAR-4K AV over IP system
●Monitors all system devices from one central system
●IPGEAR-4K is a cost-effective IP video solution
●Optimized for 1 Gigabit networks
●Offers control via the web interface or mobile app (iOS)
●Auto-discovery of transmitters and receivers for easy installation
●Drag & Drop matrix switching for simple operation
●Quickly and easily create and manage video walls
●Automatically assigns IP addresses to transceivers
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Packing List
●1x BG-VOP-CB
●1x 5v DC power supply
●1x Rack-mounting ear set
●1x User Manual
Connection Diagram
Specifications
Technical
Usage
IPGEAR-4K System Controller
Inputs
1 x 5VDC, 1 x RJ45, 4 x USB 2.0
Output
1 x HDMI
HDMI Connector
Type A (19-pin female)
RJ-45 Connector
WE/SS 8P8C
Mechanical
Housing
Metal Enclosure (Black)
Dimensions (L x W x H)
90 x 78 x 29mm (Device), 198 x 137 x 74mm (Box)
Weight
222g (Device), 493g (Box)
Mounting Options
Mounting Ears (included)
Power Supply
5V DC
Power Consumption
3.5 Watts max
Operating Temperature
0 - 40°C (32 – 104°F)
Storage Temperature
-20 – 60°C (-4 – 140°F)
Humidity
20 – 90% (Dry)
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Panel Descriptions
1. Activity LED - Indicates internal storage activity
2. Power LED - Indicates live power connection
3. +5V DC - Power Connection
4. HDMI Output - System Monitor
5. LAN - Ethernet control port
6. USB - Reserved for factory use
System Requirements
For the BZBGEAR AVoIP system to function as intended the following items are needed:
●x2 BG-VOP-MT transceivers
●x1 BG-VOP-CB smart controller
●Managed network switch
To ensure complete and reliable functionality any switch selected for an AVoIP system must
meet the requirements below and support the following features:
●Layer 2 or Layer 3 Managed Switch
●1 Gigabit Throughput minimum, 10 Gigabit recommended for larger deployments
●Multicast forwarding or filtering
●IGMP Snooping
●IGMP Querier
●Must support Jumbo Frames (8000 bytes or larger). This may be listed as MTU
(Maximum Transmission Unit) or Jumbo Packets
When using multiple switches these additional features are required:
●Dynamic Multicast Router Port
●Forward Unknown Multicast to Router Port
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7
BZBGEAR BG-VOP-CB PRODUCT MANUAL
Note: It is recommended that all listed features are applied to every network switch that
contains the same LAN/VLAN as the AVoIP system. When using PoE (Power over Ethernet)
to power the transceivers allow for a PoE budget of 7.5 watts per unit. For example, if using
10 units make sure the switch has a total PoE budget of at least 75 watts.
For information on how to configure one of BZBGEAR’s recommended and tested AVoIP
network switches, please visit our webpage for this product.
System Setup
The following instructions assume your network can support the IPGEAR-4K AVoIP system
and is already configured properly.
1. The transceivers can function either as a transmitter or receiver by toggling the
switch on the unit to the desired position. There must be at least one transmitter and
one receiver in the system.
[Up] configure as a
transmitter
[Down] configure as a
receiver
2. Once the units are assigned as transmitter or receiver the ID of the unit will need to
be set using the dipswitch panel.
●Transmitter needs to have an individual ID so they do not conflict in the control
system. Please see the dipswitch setting chart for proper configuration for large
scale deployments.
●Receivers can be set to receive signal from any transmitter or a specific one. To
receive signal from any transmitter, leave all dip switches in the 0 position (up). To
receive signal from a specific transmitter, toggle the dipswitches on the receiver to
match the positions on the desired transmitter.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8
BZBGEAR BG-VOP-CB PRODUCT MANUAL
3. When the dipswitches are set, plug the transceivers into the PoE network switch to
power them on.
a. Connect sources to transmitters and displays to receivers using HDMI cables.
b. When powered and connected to a display the receivers will display the
following:
4. Next, plug an ethernet and HDMI cable into the BG-VOP-CB smart controller
followed by power last. NOTE: power for the controller must be connected last or it
will not be able to see that the HDMI port is active.
5. The BG-VOP-CB Smart Controller is preconfigured to be set to DHCP and will
automatically grab an IP address from the network. If a DHCP server is not available,
the unit will assign itself its own IP. Both controller and transceivers must be on the
same network/VLAN to communicate properly.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9
BZBGEAR BG-VOP-CB PRODUCT MANUAL
6. Once the controller powers on you will see the following on the connected display:
If you do not see an image, power cycle the controller with all other cables connected and
wait for the unit to reboot.
7. To access the web interface on your computer, ensure it is on the same network as
the controller. Once connected, open your web browser and navigate to the
displayed IP address adding port :8080 at the end(in this example
192.168.30.3:8080).
Enter the following:
Account: admin
Password: admin
Click “Login.”
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10
Otros manuales para BG-VOP-CB
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de BZB Gear
BZB Gear
BZB Gear BG-CJ-IPRSPRO Manual de usuario
BZB Gear
BZB Gear BG-VOP-CB Manual de usuario
BZB Gear
BZB Gear BG-Commander Manual de usuario
BZB Gear
BZB Gear BG-UHD-VW29 Manual de usuario
BZB Gear
BZB Gear BG-UHD-VW2X2 Manual de usuario
BZB Gear
BZB Gear BG-Commander Manual de usuario
BZB Gear
BZB Gear Mini Pro Manual de usuario
BZB Gear
BZB Gear BG-UHD-VWP-1X4 Manual de usuario
