BYD KN95 Manual de usuario
KN95
Respirator
Description
The BYD KN95 Respirator is designed to help provide respiratory protection for the user. This product has a filter efficiency of 95% or greater
against solid and liquid aerosols free of oil.
This product contains no components made from natural rubber latex.
It is intended for respiratory protection against non-oil particles and reduce user exposure to certain airborne particles including those from
sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances.
Foldable (for single use only)
Very close facial fit
≥ 95% filtrations efficiency against solid
and liquid aerosols free of oil.
Non-sterile
Fit test
1. Place both hands over the respirator.
2. Take a deep breath and hold your breath for a few seconds, making sure the respirator collapses inward as you inhale.
3. Then exhale and hold your breath for a few seconds, making sure the respirator bulges outward as you exhale.
4. If air leaks, reposition the respirator, tighten the metallic strip and reposition the elastic bands for a better fit.
Follow steps 1-3 again until a tight seal has been achieved.
5. Respirators that have passed the fitting test are now safe to use.
6. Facial hair or other facial features may prevent the respirator from achieving a proper fit. If a tight seal is not achievable,
please DO NOT use this product.
7. If you experience difficulty breathing, dizziness, or other symptoms, leave the contaminated area immediately.
Use instructions
Wearing instructions
Suitable for protecting the mouth, nose, and chin to airborne particles, and block
liquid aerosols, blood, body fluids, and secretions.
For adult use only
Do not wash.
Store in a cool, dry, clean place away from fire and contamination.
Store between -20℃ and 38℃ (-4°F and 100°F) with relative humidity below 80％.
Expiration date: 3 years after production
Unfold the respirator and hold it with both hands, with the metallic strip facing up.
Place elastic bands around the neck and head respectively. Put the respirator
against your face covering both nose and mouth.
Adjust the metallic strip over the bridge of the nose by using two fingers to press
down until achieving a close fit.
Perform a fit test according to instructions.
3-Step check before use
1. Do not use if the packaging has been opened or
damaged.
2. Check if the elastic bands are in good condition
and are not damaged.
3. Check that the metallic strip is not broken.
Intended use
Specifications
Name
Product name
Main materials
Size
Parameter
KN95 Respirator
Inner layer: polypropylene spunbond nonwoven fabric
Middle layer: polypropylene melt-blown nonwoven+ hot air cotton
Outer layer: polypropylene spunbond nonwoven fabric
Elastic bands: polyester/nylon spandex blend
Nose clip: aluminum
110mm×160mm/4.33in.×6.30in.
Product model
Packaging specification
DN1102
1pc/bag; 20pcs/box; 960pcs/case
1. The respirator does not eliminate the risk of contracting any disease or infection.
2. Improper use may lead to illness and even death.
3. Use this product immediately after the package is opened.
4. DO NOT sleep while wearing the respirator.
5. Avoid hand contact within the interior part of the respirator.
6. DO NOT use respirators if they expired.
7. For one-time use only. Dispose the respirator according to regulations.
8. DO NOT use if the package is damaged.
9. Not intended for use in the presence of high intensity heat source or flammable gas.
10. This KN95 respirator is authorized for distribution under FDA Emergency Use Authorization only for the duration of the declaration that
circumstances exist justifying the authorization of the emergency use of KN95 respirators under section 564 of the Act, 21 U.S.C. § 360bbb-3,
unless the authorization is terminated or revoked sooner.
KN95
Respirator
Foldable (for single use only)
WARNINGS
If the respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area and replace and refit the new respirator.
Time use limitation
To the extent permitted by law, BYD shall not be liable for any loss or damage including any loss of business, loss of profits, or for any
indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided by BYD. Nothing
in this statement will be deemed to exclude or restrict BYD's liability for death or personal injury arising from its negligence.
Important notice
Product meets GB2626- 2006 KN95 standard.
www.bydcare.ca
Made in China
Outer layer
Polypropylene
spunbond nonwoven fabric
Middle layer 1
Polypropylene
melt-blown nonwoven
Middle layer 2
Hot air cotton
Nose clip
Aluminum
Elastic bands
Polyester/nylon spandex blend
Inner layer
Polypropylene
spunbond nonwoven
fabric
Polypropylene spunbond
nonwoven fabric
Polypropylene spunbond nonwoven fabric
Hot air cotton
Polypropylene melt-blown
nonwoven
Non-sterile
Este manual sirve para los siguientes modelos
1
Otros manuales de Producto respiratorio de BYD
