Bushnell Pro X7 Jolt Manual de usuario

Model: 201400, 201401

LIT. # 11-13 ENGLISH

Congratulations on your purchase of the Bushnell® Pro X™ Laser Rangender, our top of the line laser rangender

for golfers and used by more golf professionals than any other brand. e Pro X™ is a precision Laser Rangending

optical instrument designed to provide many years of enjoyment. is booklet will help you achieve optimum

performance by explaining its adjustments and features as well as how to care for this precise laser rangending optical

instrument. To ensure optimal performance and longevity, please read these instructions before using your Pro X™.

INTRODUCTION

Your Bushnell® Pro X™ is an advanced premium laser rangender comprised of Digital Technology allowing range

readings from - yards/- meters, and combines the best of a compact monocular with the new Vivid Display

Technology™. Measuring . x . x . inches, the -ounce Pro X™ delivers superb and accurate range performance to

+/- one yard. e Pro X™ features PinSeeker™ technology with JOLT, allowing the golfer to easily and quickly “zero”

in on the ag without acquiring background targets, Superb Optical Quality, &  Waterproof Construction.

Built-In Accessory Mount

Posi-Thread™Battery Door

100% Waterproof

Vivid Display Technology™

7x Magniﬁcation

Ranging

• 1760 Yards Reﬂective

• 1000 Yards to Trees

• 550 Yards to Golf Flag

Adjustable Diopter Setting

RainGuard HD

PinSeeker™with Jolt Mode

E.S.P.2™- Extreme. Speed. Precision.

• Gen 2 Turbo Processor Provides Faster Acquisition

• Provides 1/2 Yard Accuracy; 1/10 Precision from 5–125 Yards

HOW OUR DIGITAL TECHNOLOGY WORKS

e Pro X™ emits invisible, eye safe, infrared energy pulses. e Pro X™ Advanced Digital microprocessor and ASIC

chip (Application-Specic Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated

digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the

rangender, to the target, and back.

RANGING ACCURACY

e ranging accuracy of the Pro X™ is plus or minus one yard / meter under most circumstances. e maximum

range of the instrument depends on the reectivity of the target. e maximum distance for most objects is 

yards/ meters while for highly reective objects the maximum is  yards/ meters.

Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental

conditions at the time the distance of an object is being measured. The color, surface finish, size and shape of the target all affect reflectivity and

range. The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the

least reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle to

the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted

energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount

of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely,

very sunny days will decrease the unit’s maximum range.

E.S.P.2™ (Extreme. Speed. Precision. 2nd generation), our advanced second generation ranging technology, provides the fastest, most

accurate ranging measurement based on target conditions. The laser analyzes multiple individual measurements to the target and calculates and

displays the best possible result. Target variations such as reflectance, shape and color can affect the accuracy of a laser measurement, but E.S.P.2™

automatically assesses the conditions and improves the measurement up to 1/2 Yard Accuracy whenever possible from 5–125 yards. When this occurs,

display readout precision will be refined to 1/10th yard.

GETTING STARTED

OPERATIONAL SUMMARY

While looking through the Pro X™, depress the power button once to activate the Vivid Display. Place the aiming

circle (located in the center of the eld of view) upon a target at least  yards away, depress and hold the power button

down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming

circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button.

e crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is

no longer being transmitted).

Note: Once activated, the display will remain active and display the last distance measurement for 10 seconds. You can depress the power button again

at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with

magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.

ADJUSTING THE EYEPIECE

Your Pro X™ is constructed with a twist-up eyepiece designed for comfort and to exclude extraneous light. For users

without eyeglasses, rotate the eyecup counter clockwise while pulling up until it locks into the fully “up” position. e

Pro X™ provides extra-long eye-relief. If you wear glasses, make sure the eyecup is in the down position as this will

bring your eye closer the eyepiece lens allowing you to see a full eld of view. To lower the eyecup from the full “up”

position, rotate clockwise while pushing down slightly. It is also possible to set the eyecup to positions “In between”,

fully up and full down, which may suit some individuals better. e Pro X™ is also equipped with an adjustable

eyepiece (+/-  Diopter Adjustment) that allows one to focus the VDT™ display relative to the image. Simply rotate

the diopter setting until the VDT™ is in focus.

VIVID DISPLAY INDICATORS

Your Pro X™ Vivid Display™ incorporates the following illuminated indicators:

PinSeeker™ Indicator ()

Aiming Reticle ()

Battery Life Indicator ()

Active Laser ()

Distance Displayed in Yards/Meters ()

BATTERY LIFE INDICATOR

Battery Indicator:

Full charge

/ battery life remaining

/ battery Life remaining

Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.

INSERTING THE BATTERY

Remove the Posi-read™ battery door by lifting the battery door tab and then rotating counter clockwise. Insert a

(CR123) -volt lithium battery into the compartment negative end rst, then replace battery cap.

Note: It is recommended that the battery be replaced at least once every 6 months.

ACTIVE LASER

Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,

you can release the power button. e crosshairs surrounding the circle will disappear once the power button has been

released (i.e. the laser is no longer being transmitted).

103

PinSeeker beyond E.S.P range— 20196, 205107, 205108

PinSeeker & E.S.P—201960

PinSeeker & E.S.P “Play-As”PinSeeker Slope & E.S.P

PINSEEKER™

Ever have trouble getting distance to the ag? is advanced mode allows easy acquisition of the ag without

inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.

For ease of use, the device will always be in PinSeeker™Mode.

To use, align the aiming circle reticle onto the ag that you want distance to. Next, press and hold the POWER button

and move the laser slowly over the ag or desired object until a circle surrounds the ag indicator. If the laser beam

recognized more than one object (i.e. ag and background trees), distance of the ag will be displayed and a circle will

surround the PinSeeker™ indicator informing the user that distance to the ag (i.e. closer object) is being displayed in the

VDT™ (as seen below). ere may be times when only the laser beam only sees one object in its path. In this case, the

distance will be displayed, but because more than one object was not acquired, a circle will not surround the ag indicator.

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that

you are only displaying the closest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last mode used.

PINSEEKER™WITH SLOPE +/-™

e advanced patented SLOPE mode is available only on model  (Pro X™ Slope +/-™). is model features a

built-in accelerometer-based inclinometer that digitally displays the exact slope angle from - to + degrees of elevation

and is +/- . degree accurate. e Slope +/-™ mode will automatically compute an angle compensated range based upon

distance and slope angle determined by the laser rangender and built-in inclinometer. is data is then combined with

internal algorithmic formulas dealing with average club use and ball trajectories. e angle compensated range provides

direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline).

ACTIVATING SLOPE MODE (Model 201401 only)

e Pro X™ Slope +/-™ was especially designed with golfers in mind. e SLOPE mode allows you to display the angle

and “Play-As” distance. To activate or deactivate this mode, press the POWER button once to turn the unit ON. en

while looking through the eyepiece, press the MODE button and quickly release.

HOW TO USE SLOPE +/-™

Once in this mode, you will see a “ ° ” in the eld of view informing you that you are in the Slope +/- Mode. Press

the POWER button to obtain distance to the ag or other objects. Once the range is displayed, continue to hold the

POWER button down for approximately  seconds while holding the aiming circle on the ag and keeping the unit

as steady as possible so as to allow the inclinometer enough time to measure slope. en release the POWER button.

Once you have released the power button, a degree of angle and compensated range will be displayed beneath the

standard distance as seen below.

In this example, the true distance is  yards, slope is + degrees, and the compensated range is  yards. e “ ”

symbol means “Play-As”, so instead of playing as  yards, “play-as”  yards.

THE ADVANTAGE OF SLOPE +/-™

e distance to ag A in the drawing below is  yards. It is also 

yards to ag B although it is on a slope. However, if you were to play this

hole as  yards, the ball (X) would fall short of the hole/ag because

you did not take slope into account.

THE TRUTH ABOUT SLOPES

Trying to determine slope angle with the naked eye can be rather deceiving. Most are not well versed to accurately determine

slope angle. For example, most golf courses average slope is approximately  degrees. A large slope at a golf course is generally

no more than  degrees. Of course this can vary, and that is why this device will measure slope from - to  degrees.

Some real world examples may help clarify. A moderate roof pitch is /, which means that the roof rises six inches

for every  inch horizontal distance. at equates to . degrees. You can scramble up this pitch when hanging

Christmas lights, but climbing that slope for the distance of a good golf shot on a course would be exhausting. To

retrieve a  yards shot, you would climb  feet up!

162 YARDS

4°

Golf Example: Let’s say you are a strong golfer with a  yard shot. At a  degree slope the Pin would be  feet

above you. In other words, you be driving the ball to the top of a  story building!!!

NOTE: For your convenience, the Slope +/-™Mode also contains the PinSeeker®Mode/feature.

MENU SETUP

DISPLAY BRIGHTNESS

Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness

of the digital readout, making distance readings legible in low light environments. ere are four intensity settings to

choose from and this is the rst setting within the SETUP menu. Press the MODE button for  seconds to get into

the SETUP menu. e existing brightness setting will be ashing (i.e. BRT, BRT, BRT, or BRT), pressing the

MODE button will toggle between the four brightness settings. “BRT” is the lowest intensity while “BRT” is the

brightest. Simply press the MODE button until the desired brightness setting is displayed and select by pressing and

releasing the POWER button.

UNIT OF MEASURE OPTIONS

e Pro X™can be used to measure distances in yards or meters. e unit of measure indicators are located in the

lower right portion of the VDT™. ere are two measuring settings to choose from and this is the second setting

within the SETUP menu. Look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and

hold it down for approximately  seconds to get into the SETUP menu. Depressing the MODE button will toggle

through the brightness settings. If you are changing from yards to meters, a change in unit of measure will be

indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned o. If you are

changing from meters to yards, the opposite will occur. e Pro X™ will return to the last unit of measure setting

used each time the unit is turned on.

ENABLING JOLT FEATURE

e Pro X™ features PinSeeker™ technology with JOLT, allowing the golfer to easily and quickly “zero” in on the

ag without acquiring background targets. e Jolt feature provides a short vibration to indicate when Pinseeker has

triggered. is Jolt feature may be disabled in the setup menu. Holding the mode button will put the unit into the

setup mode. e Jolt enable/disable is the third option, after the brightness setting and yard/meter selection. Pressing

the re button when the display indicates “JLT on” will enable the Jolt feature. Pressing the re button when the

display indicates “JLT o: will disable the Jolt feature. In the settings mode the mode button toggles between “JLT

on” and “JLT o”.

ACCESSORY MOUNT

Molded into the bottom of the product is a threaded accessory mount that will allow you to attach the following

Bushnell® Golf Accessories:

• Golf Cart Mount: Attaches the rangender to your golf cart for easy access. Quick release clamp attaches to golf

cart and can be easily removed afterwards.

• Push/Pull Cart Monopod: Steady your hand with this telescoping monopod. Simply attach rangender to the

monopod and insert into cart umbrella holder.

• 360R Retractor: Attaches the rangender to your golf bag for easy access while walking the course.

CLEANING

Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or ngerprints, clean

with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the

lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and

photographic-type lens cleaning uid or isopropyl alcohol may be used. Always apply the uid to the cleaning cloth

– never directly on the lens.

TWO-YEAR LIMITED WARRANTY

Your Bushnell® laser rangender is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a

defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. is warranty does

not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell® Authorized Service

Department.

Any return made under this warranty must be accompanied by the items listed below:

. A check/money order in the amount of . to cover the cost of postage and handling

. Name and address for product return

. An explanation of the defect

. Proof of Date Purchased

. Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell® Outdoor Products Bushnell® Outdoor Products

Attn.: Repairs Attn.: Repairs

 Cody  Great Gulf Drive, Unit B

Overland Park, Kansas  Vaughan, Ontario LK W

For products purchased outside the United States or Canada, please contact your local dealer for applicable warranty information.

In Europe you may also contact Bushnell® at:

Bushnell Germany GmbH

European Service Centre

Mathias-Brüggen-Str. 

D- Köln

GERMANY

Tél: +  -

Fax: +  -

is warranty gives you specic legal rights.

You may have other rights which vary from country to country.

© Bushnell® Outdoor Products

Tabla de contenidos

Otros manuales de Instrumento de medición de Bushnell

Bushnell

Bushnell 20-5103 Manual de usuario

Bushnell

Bushnell Cabela's VLR II Manual de usuario

Bushnell

Bushnell Tour Z6 Jolt Slope Manual de usuario

Bushnell

Bushnell Gforce 1300 ARC 201965 Manual de usuario

Bushnell

Bushnell Hybrid 201951 Manual de usuario

Bushnell

Bushnell Tour Z6 Manual de usuario

Bushnell

Bushnell Edge Disc Golf Rangefinder Manual de usuario

Bushnell

Bushnell 20-2018 Manual de usuario

Bushnell

Bushnell Pro 1m 205107 Manual de usuario

Bushnell

Bushnell NEO GHOST Manual de usuario

Bushnell

Bushnell 1K Manual de usuario

Bushnell

Bushnell PRIME 1500 Manual de usuario

Bushnell

Bushnell NEO GHOST Manual de usuario

Bushnell

Bushnell Scout 1000 Manual de usuario

Bushnell

Bushnell Bone Collector LBC1000 Manual de usuario

Bushnell

Bushnell GForce DX 1300 ARC Manual de usuario

Bushnell

Bushnell Legend 204100 Manual de usuario

Bushnell

Bushnell Yardage Pro 20-0405 Manual de usuario

Bushnell

Bushnell Nitro Manual de usuario

Bushnell

Bushnell TOUR V4 Manual de usuario

Bushnell

Bushnell 201042 Manual de usuario

Bushnell

Bushnell Scout1000 20-1931 Manual de usuario

Bushnell

Bushnell Pro XE Manual de usuario

Bushnell

Bushnell 202204 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario