Bushnell 202355 Manual de usuario

Model: 202355, 202356

LIT. #: 98-2387/09-12

202355/202356 - Bushnell®Scout DX 1000 ARC™- Laser Rangeﬁnder

Congratulations on your purchase of the Bushnell® Scout DX  ARC™, our most compact and versatile laser

rangender. e Scout DX  ARC™ is a precision Laser Rangender optical instrument designed to provide

many years of enjoyment. is booklet will help you achieve optimum performance by explaining its adjustments and

features as well as how to care for this precise laser rangending optical instrument.

INTRODUCTION

Your Bushnell® Scout DX  ARC™ is an ultra thin, premium performing laser rangefinder comprised of the

latest Digital Technology allowing range readings from - Yards / - meters. Measuring . x  x .

inches, the -ounce Scout DX  ARC™ with E.S.P.™ (Extreme. Speed. Precision.) is capable of delivering

extremely fast target acquisition, incredible ½ yard accuracy, and /th precision from - yards and +/-  yard

accuracy from - yards. The Scout DX  also features Bushnell’s patented ARC™ (Angle Range

Compensation), superb optical quality, and  waterproof construction.

Built-In Tripod Mount

VSI™- Variable Sight-In Distance

ARC™- Bow & Riﬂe Modes

Posi-Thread™Battery Door

100% Waterproof

Adjustable Diopter Setting

6x Magniﬁcation

E.S.P.™- Extreme. Speed. Precision.

• Turbo Processor Provides Faster Acquisition

• Provides 1/2 Yard Accuracy; 1/10 Precision from 5–125 Yards

Ranging Performance

• 1000 Yards Reective

• 650 Yards to Trees

• 325 Yards to Deer

Rugged ABS Housing

Fully Multi-Coated

HOW OUR DIGITAL TECHNOLOGY WORKS

e Scout DX  ARC™ emits invisible, eye safe, infrared energy pulses. e Scout DX  ARC’s Advanced

Digital microprocessor and ASIC chip (Application-Specic Integrated Circuit) results in instantaneous and accurate

readings every time. Sophisticated digital technology instantaneously calculates distances by measuring the time it

takes for each pulse to travel from the rangender, to the target, and back.

RANGING ACCURACY

e ranging accuracy of the Scout DX  ARC™ is plus or minus one yard / meter under most circumstances. e

maximum range of the instrument depends on the reectivity of the target. e maximum distance for most objects

is  yards /  meters while for highly reective objects the maximum is  yards /  meters.

Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental

conditions at the time the distance of an object is being measured. The color, surface finish, size and shape of the target all affect reflectivity and

range. The brighter the color, the longer the range. White is highly reflective, for example, and allows longer ranges than the color black, which is

the least reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle

to the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted

energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount

of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely,

very sunny days will decrease the unit’s maximum range.

GETTING STARTED

OPERATIONAL SUMMARY

While looking through the Scout DX  ARC™, depress the power button once to activate the display. Place the

aiming circle (located in the center of the eld of view) upon a target at least  yards away, depress and hold the power

button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the

aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power

button. e crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the

laser is no longer being transmitted).

Note: Once activated, the display will remain active and display the last distance measurement for 30 seconds. You can depress the power button again

at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with

magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.

DISPLAY INDICATORS

Your Scout DX  ARC™ display incorporates the following illuminated indicators:

Angle Range Compensation Symbols

Rie Mode ()

Bow Mode ()

Battery Life Indicator ()

Aiming Circle ()

Active Laser ()

Targeting Symbols

BullsEye Mode ()

Brush Mode ()

Primary Numeric Display displays Line-of-sight Distance ()

Holdover / Bullet-drop measure for Rie Mode

MOA ()

CM ()

IN ()

MIL ()

Sight Dist = Variable Sight-In Distance ()

Secondary Numeric Display ()

(Toggles from Degree of Angle to Holdover / bullet drop for Rie mode)

(Toggles from Degree of Angle to True Horizontal Distance for Bow Mode)

MOA CM

Y M

SIGHT DIST

910

ANGLE RANGE COMPENSATION

e Scout DX  ARC™ is an advanced laser rangender monocular featuring a built-in accelerometer-based

inclinometer that digitally displays the exact angle from - to + degrees of elevation and is +/- . degree accurate.

e Bushnell® Scout DX  ARC™ solves a problem hunters have been faced with for years. e problem: Bow and

rie hunters have struggled with extreme uphill and downhill angles because of how these angles alter true horizontal

distance to your target. e Solution: ARC’s integrated inclinometer provides elevation angle to allow for distance

compensation when targeting objects that are either uphill or downhill. is data is then combined with internal

algorithmic ballistic formulas.

ARC™(ANGLE RANGE COMPENSATION ) MODES

Bow Mode ( ): Displays line of sight distance, degree of elevation, and true horizontal distance from - yards /

meters and a maximum inclination of +/- °.

Rie Mode ( ): Calculates and displays the amount of bullet drop, at the target in inches, centimeters, MOA

or MIL. e amount of bullet drop is determined by the line of sight distance to the target, degree of elevation, along

with the specic ballistic characteristics of the caliber and ammunition load. When you range your target, the line of

sight, degree of elevation, and bullet-drop/holdover in inches, centimeters, MOA, or MIL will be displayed from 

to  yards/meters with a maximum inclination of +/- °. One of eight ballistic groups (identied as A, B, C, D, E,

F, G, and H) for center re ries and two ballistic groups (Identied as I and J) for Black Powder / Muzzleloaders can

be selected by the user, with each formula representing a given combination of caliber and loads. e ballistic groups

are selected by the user in the SETUP menu.

Regular Mode ( ): is mode does not provide any degree of elevation or compensated distance, but instead,

line of sight distance only.

BATTERY LIFE INDICATOR

Battery Indicator:

Full charge

/ battery life remaining

/ battery Life remaining

Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.

INSERTING THE BATTERY

Remove the Posi-read™ battery door by lifting the battery door tab and then rotating counter clockwise. Insert a

CR -volt lithium battery into the compartment negative end rst, then replace the battery cap.

NOTE: It is recommended that the battery be replaced at least once every 12 months.

UNIT OF MEASURE OPTIONS

e Scout DX  ARC™ can be used to measure distances in yards or meters. e unit of measure indicators are

located in the lower right portion of the LCD.

ACTIVE LASER

Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,

you can release the power button. e crosshairs surrounding the circle will disappear once the power button has been

released (i.e. the laser is no longer being transmitted).

SELECTIVE TARGETING™ MODES

e Scout DX  ARC™ was especially designed with hunters in mind. e selective targeting modes allow you

to adjust the performance parameters of the unit to suit your specic situation and environment. To move from one

mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the

MODE button and quickly release. e dierent targeting modes available and mode indicators are listed below:

Standard with Automatic SCAN: is setting allows most targets to be distanced up to  yards. Used for

moderately reective targets that are typical of most distancing situations. e minimum distance in the standard

mode is  yards. To use the Automatic SCAN feature, simply hold down on the POWER button for approximately

 seconds and move the rangender from object to object while leaving the POWER button depressed. Automatic

SCAN will allow the range to be continuously updated as multiple objects are targeted.

BullsEye™(Indicator - ): is advanced mode allows easy acquisition of small targets and game without

inadvertently getting distances to background targets that have stronger signal strength. When more than one object

has been acquired, distance of the closer object will be displayed and a crosshair will surround the BullsEye™ indicator

informing the user that distance to the closer object is being displayed in the LCD. Once in this mode, press the

POWER button to turn the unit on. Next, align the aiming circle onto the object (i.e. deer) that you want distance

to. Next, press and hold the POWER button and move the laser slowly over the deer until crosshairs surround the

BullsEye indicator. If the laser beam recognized more than one object (i.e. deer and background trees), distance of the

closer object (i.e. deer) will be displayed and crosshairs will surround the BullsEye indicator informing the user that

distance to the closer object is being displayed in the LCD (Figure 1). ere may be times when only the laser beam

only sees one object in its path. In this case,  the distance will be displayed, but because more than one object was

not acquired, crosshairs will not surround the BullsEye indicator.

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to

ensure that you are only displaying the closest of the objects recognized by the laser.

218

Figure 1Figure 2

Brush™(Indicator - ): is advanced mode allows objects such as brush and tree branches to be ignored so that

distance only to background objects are displayed. When more than one object has been acquired, distance of the

further object will be displayed and a circle will surround the Brush™ indicator informing the user that distance of

the farthest object is being displayed.

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object that

you want distance to. Next, press and hold the POWER button and move the laser slowly over the object until a circle

surrounds the Brush indicator. If the laser beam recognized more than one object (i.e. closeup tree branch and a deer

in the background), distance of the further object (i.e. deer) will be displayed and a circle will surround the brush

indicator informing the user that distance to the farther object is being displayed (Figure 2). ere may be times when

only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than

one object was not acquired, the circle will not surround the Brush indicator.

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to

ensure that you are only displaying the furthest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to

the last targeting mode used.

MENU SETUP – SELECTION of BOW, RIFLE, REGULAR MODES, UNIT OF MEASURE, SIGHT-IN DISTANCE AND BALLISTIC

CORRECTION

ARC (Angle Range Compensation)

ere are two ARC™ (Angle Range Compensation) modes and one REGULAR mode. e two ARC™ modes are

BOW mode ( )and RIFLE mode ( ).

To select between these modes, rst turn the unit “ON” by pressing and releasing the POWER button. Next, press and

hold the MODE button for three seconds to get into the SETUP menu. You will see the existing compensation mode

indicated by either the “Bow” symbol (), the “Rie” symbol ( )lit with one of the ballistic groups (A thru J)

displayed and ashing, or no indicators lit and the message ( ) ashing.

e modes can be cycled through in a circular fashion by pressing and releasing the mode button. e order of modes is

a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE

J, REG, etc. When the bow selection is displayed, ( ) will ash and when the rie selection is displayed, ( )

and ballistic group will be ashing. When the ( ) is displayed, the message ( ) will ash within the display.

Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER

button. Following this selection, the current unit of measure, “Y” for yards or “M” for meters will ash

in the display and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure.

When the desired unit of measure is displayed, press the POWER button to accept the unit of measure.

If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:

. Variable Sight-In (VSI™) - Allows the rie hunter to choose from four sight-in distances (, , , or  yards

or meters) and provides holdover / bullet-drop data in inches, centimeters, MOA, or MIL. e “Sight Dist” (Sight-

In Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e. , ,

, or ). e Sight-In Distance options can be cycled through in a circular fashion by pressing and releasing the

mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the power button.

. And nally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you have the

option of determining how you would like hold-over / bullet-drop displayed. If measurement units are in yards, you will be able

to choose between inches, MOA, or MIL. If measurement units are in meters, you will be able to choose between centimeters,

MOA, or MIL. For example, the “CM” for centimeters or “IN” for inches will ash in the display and the SETUP icon is still

lit. Once the desired ballistic measure is displayed, select it by pressing and releasing the power button.

Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identied

in the display as indicated below.

Otros manuales para 202355

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Bushnell

Bushnell

Bushnell Scout1000 20-1931 Manual de usuario

Bushnell

Bushnell Tour Z6 Manual de usuario

Bushnell

Bushnell Elite 1 Mile ARC CONX Manual de usuario

Bushnell

Bushnell TOUR V3 Manual de usuario

Bushnell

Bushnell TOUR V4 Manual de usuario

Bushnell

Bushnell 202204 Manual de usuario

Bushnell

Bushnell Hybrid Laser GPS Manual de usuario

Bushnell

Bushnell Yardage Pro Laser Manual de usuario

Bushnell

Bushnell NEO GHOST Manual de usuario

Bushnell

Bushnell GOLF HYBRID Manual de usuario

Bushnell

Bushnell Hybrid 201951 Manual de usuario

Bushnell

Bushnell 201932 Manual de usuario

Bushnell

Bushnell Edge Disc Golf Rangefinder Manual de usuario

Bushnell

Bushnell TOUR V4 Manual de usuario

Bushnell

Bushnell Medalist 201354 Manual de usuario

Bushnell

Bushnell 20-1916 Manual de usuario

Bushnell

Bushnell Tour V2 Manual de usuario

Bushnell

Bushnell Sport 202201 Manual de usuario

Bushnell

Bushnell Pro 1m 205107 Manual de usuario

Bushnell

Bushnell YARDAGE PRO LEGEND Manual de usuario

Bushnell

Bushnell Cabela's VLR II Manual de usuario

Bushnell

Bushnell GOLF Tour L7 201870A Manual de usuario

Bushnell

Bushnell Nitro Manual de usuario

Bushnell

Bushnell Phantom Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario