BT Decor 2100 Manual de usuario

If you experience any problems, please visit

www.bt.com/producthelp

BT Decor 2100

User Guide

If you experience any problems, please visit

www.bt.com/producthelp

Mute

Welcome ….

to your BT Decor 2100

Corded Telephone

• 3 one-touch memory buttons – for easy dialling

of your 3 most important numbers

• 10 number quickdial memory – so you can store

a further 10 useful telephone numbers

• Mute – mutes your voice so you can talk to

someone else in the room without your caller

hearing you

• Last number redial – easy, one touch dialling of

the last number called

• Ringer volume and tone control options

This User Guide provides you with all

the information you need to get the most

from your phone.

Before you make your ﬁrst call you will need to

set up your phone. Follow the simple instructions

in ‘Getting started’, on the next few pages.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

Getting started

Location

You need to place your BT Decor 2100 within

3 metres of a telephone socket so that the cable

will reach.

Setting up

1 Plug the telephone line cord into the telephone

wall socket.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

Getting to know your phone

Mute

Quickdial

memory card

Use to make a note

of your quickdial

memory numbers.

Quick dial

Use to store one-touch

and quickdial telephone

numbers in the memory

and to dial quickdial

memory numbers.

Mute

(with LED indicator)

During a call, mutes

your voice so your caller

cannot hear you.

The red LED illuminates

when the mute function is

on and ﬂashes when storing

a number in the one-touch

or quickdial memory.

If you experience any problems, please visit

www.bt.com/producthelp

Getting to know your phone

Mute

Ringer tone

switch (located

on back of base)

Use to set the ringer

tone: R1, R2 or R3.

Incoming call

LED indicator

Red LED ﬂashes to

indicate an incoming call.

One-touch

memory card

Use to make a note

of your 3 one-touch

memory numbers.

Redial

Press to redial the last

number called.

R (Recall)

Used with switchboard

services and certain BT

Calling Features.

Ringer volume switch

Use to select the ringer

volume: High, Low or Off.

One-touch memory buttons

Use to store and dial your one-

touch memory numbers.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

Using the phone

Make a call

1. Lift the handset and wait for the dial tone.

2. Enter the telephone number.

End a call

1. Replace the handset on the base.

Receive a call

1. When you receive a call, the telephone rings

and the red incoming call LED will ﬂash. Simply

pick up the handset to answer the call.

Last number redial

1. Lift the handset and press the button.

The last number called will be redialled.

Note: a redial number can only be 32 digits

long. If the last number redialled was longer

than 32 digits only the ﬁrst 32 digits will be

dialled out.

Mute

1. During a call, press and release the Mute

button to mute the handset microphone. The

red LED on the mute button will illuminate to

indicate that the mute feature is on. Your caller

now cannot hear you speak.

2. To switch mute off, press and release the Mute

button again. The red LED will turn off and your

caller will now be able to hear you.

If you experience any problems, please visit

www.bt.com/producthelp

Adjust the ringer volume

There are 3 volume levels to choose from:

High, Low or Off. The default setting is High.

1. Adjust the switch on the base to the volume

you want.

Adjust the ringer tone

There are 3 tones to choose from: R1, R2 or R3.

The default setting is R1.

1. Adjust the switch on the back of the base to the

ringer tone you want.

One-touch memory

You can store 3 of your most important telephone

numbers under the one-touch memory buttons

, and . There is a memory

card located above the one-touch memory buttons

so you can make a note of the number or contact

associated with the number you have stored. You’ll

need to lift the plastic plate up so you can write on

the card.

Note: one-touch memory telephone numbers

can be a maximum of 32 digits. If you enter

more than 32 digits you will hear an error tone.

Store a one-touch number

1. Lift the handset.

2. Press and hold the button for 2 seconds

until you hear a conﬁrmation tone, then release.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

3. Press a button to assign a number, either:

M1 , M2 or M3 or

to . A conﬁrmation tone will be heard.

4. Dial the number you want to store.

5. Press and release the button. You will

hear a conﬁrmation tone.

6. Replace the handset on the base.

Note: if you wish to cancel storing a number,

replace the handset on the base. The storing

process will be cancelled and any number that

was previously stored will be retained.

Dial a one-touch number

1. Lift the handset and wait for the dial tone.

2. Press the one-touch button ,

or under which the number you want

is stored. The number will be dialled

out automatically.

Delete a one-touch number

1. Lift the handset.

2. Press and hold the button until you hear

a conﬁrmation tone, then release. The red LED

on the mute button will ﬂash.

3. Press the one-touch button that you want

to delete.

4. Press the button. You will hear a

conﬁrmation tone. Replace the handset on

the base.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

Quickdial memory

You can store 10 of your most frequently dialled

telephone numbers under the quickdial memory

buttons to . There is a quickdial memory

card located on the base of the telephone so you

can make a note of the number or the contact

associated with the number you have stored.

You’ll need to lift the plastic plate up so you can

write on the card.

Note: quickdial memory telephone

numbers can be a maximum of 32 digits.

If you enter more than 32 digits you will

hear an error tone.

Store a number in the quickdial memory

1. Lift the handset.

2. Press and hold the button until you hear

a conﬁrmation tone, then release. The red LED

on the mute button will ﬂash.

3. Press the quickdial memory location button

to under which you want to store the

telephone number.

4. Enter the telephone number you want to store

including the area code. (If you want to insert

a pause in the number, see ‘To insert a pause’

on page 14).

5. Press the button. You will hear a

conﬁrmation tone. Replace the handset on

the base.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

Note: if you wish to cancel storing a number,

replace the handset on the base. The storing

process will be cancelled and any number that

was previously stored will be retained.

Dial a quickdial memory number

1. Lift the handset and wait for the dial tone.

2. Press the button.

3. Press the quickdial memory location button

to under which the number you

want is stored. The number will be dialled

out automatically.

Delete a number stored in the

quickdial memory

1. Lift the handset.

2. Press and hold the button until you hear

a conﬁrmation tone, then release. The red LED

on the mute button will ﬂash.

3. Press the quickdial memory location button

to that you want to delete.

4. Press the button. You will hear a

conﬁrmation tone. Replace the handset on

the base.

If you experience any problems, please visit

www.bt.com/producthelp

If you experience any problems, please visit

www.bt.com/producthelp

General information

Safety

- Only use the telephone line cord supplied

otherwise your telephone may not work.

- Do not open the handset or base of the

telephone. This could expose you to high

voltages or other risks.

- Do not stand your product on carpets or other

surfaces that generate ﬁbres, or place it in

locations preventing the free ﬂow of air over

its surfaces.

- Do not expose to direct sunlight.

- Do not submerge any part of your product in

water and do not use it in damp conditions,

such as bathrooms.

- Do not expose your product to ﬁre, explosive or

other hazardous conditions.

Cleaning

Clean the telephone with a damp (not wet) cloth,

or an anti-static wipe. Never use household polish

as this will damage the product. Never use a dry

cloth as this may cause a static shock.

Tabla de contenidos

Otros manuales de Teléfono de BT

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

Ericsson

Ericsson Dialog 3213 Manual de usuario