BT BT6610 Hoja de especificaciones
Block
Nuisance
Calls
Block
Nuisance
Calls
Designed to block nuisance calls
Quick Set-up and User Guide
Nuisance
Calls
Nuisance
Nuisance
Nuisance
Nuisance
Calls
Calls
Calls
Calls
Quick Set-up and User Guide
BT6610 Nuisance Call Blocker
Digital Cordless Phone with Answering Machine
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Important – please read first2
• Only use the line cord, power supply and rechargeable batteries supplied with
your phone.
• Make sure that the power supply is connected to a known working socket.
• Connect your phone to the power supply and allow the batteries to charge for 24
hours before connecting the line cord to your telephone socket.
• To make sure you get the best range and reception from your handset, avoid
interference by placing the base unit away from large metal objects such as
fridge freezers and microwave ovens or electronic products such as computers
and TVs.
Answer machine – handy hint
Make sure the telephone is set to ‘Answer and record’ and that the Ring delay
is set to answer before any voicemail service i.e. BT Answer 1571, or similar.
The default setting is four rings. If you want to change this, please see page 47-48.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
3
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Check box contents
Handset Base
Telephone line cord
(pre-installed)
Handset Charger Mains power adaptor
(item code 066270)
2 x AAA Ni-MH 750 mAh
rechargeable batteries
(already in handset)
(pre-installed)
Mains power adaptor
(item code 066270)
2 x AAA Ni-MH 750 mAh
rechargeable batteries
(already in handset)
Important
Only use the mains power adaptors, cables and rechargeable batteries supplied in this box or this
product might not work. Any replacement rechargeable batteries must be of the same type.
BT accepts no responsibility for damage caused to your BT6610 if you use any other type of batteries.
Contents for each additional handset (multipacks only)
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Where to put your phone
• Place the base within
3 metres of a mains power
socket and 3 metres of a
phone socket so the cables
will reach.
• Make sure it’s at least a
metre away from other
electrical appliances to avoid
interference.
• Don’t place the phone or
base in a bathroom or other
humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
• Don’t connect the phone line
to a phone socket until the
handset is fully charged.
• The base station should
be plugged into the mains
power socket all the time.
1. Plug the mains power
adaptor into the
base, with the cable
clipped in the
groove provided.
2. Plug the other end
of the power adaptor
into the wall power
socket and switch on.
Quick set-up guide4
1 Plug in
The phone line cord is pre-installed but don’t
plug the other end into the wall socket yet.
Turn the cable when clipping into the groove so
that the narrow part fits between the clips before
turning cable back to secure.
1
2
Quick set-up guide 5
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 22 hours talk time or
240 hours standby on a single
charge. (This doesn’t mean you
can unplug the base or leave
the handset for this length of
time without charge).
Please note that new Ni-MH
rechargeable batteries don’t reach
full capacity until they’ve been in
normal use for several days.
Battery low warning
The icon will flash, you’ll
see the message Battery low in
the display and hear a warning
beep every minute, to indicate
that you need to recharge your
handset. You can remove the
display message by selecting
Hide. If the battery charge
completely runs out, the display
will show Batteries flat. Please
charge. You must recharge
the handset batteries before
you can use the handset. If the
charge completely runs out the
handset will switch off. Place
the handset on the base or
charger to charge.
Quick set-up guide 5
2 Activate the batteries
and charge
1. Activate the batteries by pulling the plastic tab
away from the bottom of the handset.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
2. The BT logo will appear on the screen, followed by
the set up wizard screen displaying Please set the
time and date to start using your telephone. Don’t
follow these instructions yet. Place your handset on
the base to charge first.
3. Place the handset on the base and leave to charge
for 24 hours.
IMPORTANT
Charge the handset batteries for 24 hours or your
phone might not work.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Quick set-up guide6
Battery performance
• To keep the batteries in the
best condition, leave the
handset off the base for a
few hours at a time.
• Running the batteries right
down at least once a week
will help them last as long as
possible.
• After charging your handset
for the first time, subsequent
charging time for the
batteries is approximately
8 hours.
• The charge capacity of
rechargeable batteries will
go down over time, which
will reduce the talk and
standby time. Eventually
they’ll need replacing.
For details on how to get
replacement batteries,
call the helpline on
0800 145 6789*.
Hide
Line cord error.
Please check.
If your screen displays this message,
don’t worry. This is normal and
will continue to be displayed until
you connect the phone line cord
in step 4.
4. After 24 hours, plug the phone line cord into the
phone wall socket.
3 Follow the set up wizard
Follow the set up wizard to set the time and date,
record your outgoing message for the answer
machine, set up call blocking and add contacts.
Select YES by pressing the Left option button
if you want to follow the set-up wizard
prompt or select NO by pressing the Right option
button to continue to the next prompt until
set-up is complete.
Quick set-up guide 7
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Quick set-up guide 7
Using your BT6610
on a broadband line?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug it into the wall socket via
a microfilter (not supplied).
If your main phone
socket has a single
socket, you do need
to use microfilters,
like this:
You’ll need a microfilter for
every phone socket where
you’ve got equipment plugged
in – up to a maximum of four
per line – including alarm
sytems and digital TV boxes.
You can get BT ADSL micro
filters from bt.com/shop
You don’t need to use
microfilters if your main phone
socket has two separate
sockets, like these:
4 Set up your additional
handsets (multipacks only)
1. For additional handsets and chargers: plug the
mains power adaptor into the back of the charger
and plug the other end into the mains wall socket
and switch on the power.
2. Activate the batteries as explained on page 5. If you
set the time and date on the first handset then it
will be shared with all other handsets in your multi
pack once you activate the batteries.
3. Place the handset on the charger to charge for
24 hours.
Quick set-up guide
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
8
If you ever need to remove the batteries, place
your fingers in the groove at the bottom of the
handset and lift the cover up to release it.
Then, gently ease
the batteries out.
5 Go!
Your BT6610 is now ready for you
to use
• For instructions on making a call, go to page 22.
• For help personalising your phone’s settings,
go to page 59.
• For instructions on using the answer machine,
go to page 44.
Please note, other products
connected to the line are not
compatible with this feature
and will still ring.
You must subscribe to a Caller
Display service from your
network provider for the block
nuisance calls feature to work.
Charges may apply.
Blocked will be displayed with
no backlight on the handset
when a blocked call is received.
The handset or base will
not ring.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Quick set-up guide 9
6 Block nuisance calls
The BT6610 blocks numbers in two separate ways
to help you avoid nuisance calls, firstly by type e.g
withheld or international and also by your choice of
specific numbers (you can store up to 100 numbers
of your own choice).
1. Select Menu, scroll to Call Control and
press Select.
2. Follow the instructions to set your PIN for the first
time and select OK, (see page 55).
3. Incoming calls is displayed, press Select.
4. Press to highlight Block calls and press
Select. You now have 2 choices:
i) To block calls by type, when By call type is
highlighted, press Select. Select Blocked or
Allowed for each of the call types by highlighting
each one using and ,: International,
Withheld number, No Caller ID and Payphone,
then select Save.
ii) To block calls by a specific number, press
to highlight By number and press Select. You will
enter the blocked numbers list, press Options and
Quick set-up guide
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
10
select Add. Enter the number you want to block (or
you can select Options and select a number from
your contacts or calls list) then select Save.
The Block button
The block call button can be used in 3 ways:
On incoming calls, during a call and in idle mode,
see page 30 under Call control settings.
7 Help
Most problems can be fixed with a few simple
checks, you may find the answer in the Help
section on page 80 or see our online frequently
asked questions at bt.com/producthelp
Alternatively, call the Helpline on 0800 145 6789*.
* Calls made from within the UK mainland network are free. Mobile and
international call costs may vary.
For more information and
general advice on handling
unwanted calls please go to
bt.com/unwantedcalls
Please note, other products
connected to the line are not
compatible with this feature
and will still ring.
For more information on Call
control settings, go to page 28.
No PIN number is required
when using the block call
button when there is an
incoming call or during a call.
If you cannot find the answer
to your problem in this user
guide, then please call our free
Helpline on 0800 145 6789*.
Our dedicated advisors are
more likely to be able to help
you than the retailer where you
made your purchase.
Otros manuales para BT6610
1
Tabla de contenidos
Otros manuales de Teléfono inalámbrico de BT
BT
BT BT3660 Hoja de especificaciones
BT
BT FREESTYLE 2010 Manual de usuario
BT
BT Freestyle 2500 Manual de usuario
BT
BT Verve 410 Manual de usuario
BT
BT QUARTET 3100 Manual de usuario
BT
BT Diverse 2016 Manual de usuario
BT
BT PAPERJET 60 Manual de usuario
BT
BT BT3960 Manual de usuario
BT
BT Freestyle 350 Manual de usuario
BT
BT Digital Cordless Telephone Manual de usuario
BT
BT Freestyle 650 Manual de usuario
BT
BT Freelance XC 200 Manual de usuario
BT
BT DIVERSE 6410 Manual de usuario
BT
BT Freestyle 1050 Manual de usuario
BT
BT BT8600 Hoja de especificaciones
BT
BT Home SmartPhone Manual de usuario
BT
BT Freelance XC 100 Manual de usuario
BT
BT CALYPSO 1100 Manual de usuario
BT
BT RELATE 600 Manual de usuario
BT
BT BT2200 Manual de usuario
