BT BT1100 Hoja de especificaciones

UK’s best selling phone brand†

Quick Set-up and User Guide

BT1100

Digital Cordless Phone

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Important – please read ﬁrst2

• Only use the line cord, power supply (item code: 066773) and rechargeable

batteries supplied with your phone.

• Make sure that the power supply is connected to a known working socket.

• Connect your phone to the power supply and allow the batteries to charge for

24 hours before connecting the line cord to your telephone socket.

• To make sure you get the best range and reception from your handset, avoid

interference by placing the base unit away from large metal objects such as

fridge freezers and microwave ovens or electronic products such as computers

and TVs.

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Check box contents

IMPORTANT

Only use the mains power adaptors, cables and rechargeable batteries supplied in this box, or this

product may not work. Any replacement rechargeable batteries must be of the same type. BT accepts

no responsibility for damage caused to your BT1100 by using any other type of batteries.

Contents for each additional handset (multipacks only)

Handset

Mains power adaptor

(item code 066773)

Mains power adaptor

(item code 066773)

Telephone line cord

(pre-installed)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

2x AAA NiMH 500mAh

rechargeable batteries

(already in handset)

Base

Charger

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Where to put your phone

• Place the base within

3 metres of a mains power

socket and 1.8 metres of a

phone socket so the cables

will reach.

• Don’t place the phone or

base in a bathroom or

other humid area.

• The product works by

sending radio signals

between the handset and

base. The strength of the

signal depends on where you

position the base. Putting it

as high as possible can help

give you the best signal.

IMPORTANT

• Don’t connect the phone line

to a phone socket until the

handset is fully charged.

• The base station should

be plugged into the mains

power socket all the time.

Quick set-up guide4

1Plug in

1. Plug the mains power

adaptor into the base,

with the cable clipped

in the groove provided.

2. Plug the other end

of the power adaptor

into the wall power

socket and switch on.

The phone line cord is pre-installed but don’t

plug the other end into the wall socket yet.

066773

Quick set-up guide 5

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Talk/Standby time

Under ideal conditions, the

handset batteries should give

up to 12 hours talk time or

120 hours standby on a single

charge.

Please note that new Ni-MH

rechargeable batteries don’t

reach full capacity until

they’ve been in normal use

for several days.

Battery low warning

The icon will ﬂash, you’ll

see the message

Battery

Low

the display and hear a warning

beep every minute, to indicate

that you need to recharge your

handset before you can use it.

You can remove the display

message by selecting

Hide

. If

the battery charge completely

runs out, the display will show

Batteries

flat.

Please

charge

You must recharge the handset

batteries before you can use

the handset. If the charge

completely runs out the

handset will switch off. Place

the handset on the base or

charger to charge.

Quick set-up guide 5

2Activate the batteries and

follow the Set-up wizard

1. Activate the batteries by pulling

the plastic tab away from the

back of the handset.

2. The handset will check for a

link with the base station.

Once found, the screen will

show,

Please

set

the

time

and

date

. Press the Left option

button on the handset to

follow the setup wizard. You’ll

need to set the time and date, but you can then

press the Right option button to skip any

further options until setup is complete (you can

always set these up later).

Remove this tab

and charge batteries

for 24 hours before use.

Rechargeable batteries

already fitted

Please set the

time and date

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Quick set-up guide6

Battery performance

• To keep the batteries in the

best condition, leave the

handset off the base for a

few hours at a time.

• Running the batteries right

down at least once a week

will help them last as long

as possible.

• After charging your handset

for the ﬁrst time, subsequent

charging time for the

batteries is approximately

8 hours.

• The charge capacity of

rechargeable batteries will

go down over time, which

will reduce the talk and

standby time. Eventually

they’ll need replacing.

For details on how to get

replacement batteries,

call the helpline on

0800 218 2182*.

3. Once set-up is complete your handset will display

Please check line cord

, place the handset on the

base to charge.

4. After 24 hours, plug the phone line cord into the

phone wall socket.

IMPORTANT

Charge the handset batteries for 24 hours or your

phone might not work.

Quick set-up guide 7

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Set up your additional handsets (multipacks only)

1. For additional handsets and chargers: plug the

mains power adaptor into the underside of the

charger and plug the other end into the mains wall

socket and switch on the power.

2. Activate the batteries as explained on page 5.

3. Place the handset on the charger to charge for

24 hours.

If you ever need to remove the batteries, slide

open the battery compartment cover then gently

ease the batteries out.

Using your BT1100 on a line

with broadband?

To avoid problems with your

broadband or noise on your

phone line, you might need to

plug your telephone line cord

into the wall socket via a

microﬁlter (not supplied).

If your main phone

socket has a single

socket, you do need

to use microﬁlters,

like this:

You’ll need a microﬁlter for every

phone socket where you’ve

got equipment plugged in – up

to a maximum of four per line

– including alarm sytems and

digital TV boxes.

You can get BT ADSL micro ﬁlters

from bt.com/shop

You don’t need to use microﬁlters

if your main phone socket has

two separate sockets, like these:

Quick set-up guide

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

3Go!

Your BT1100 is now ready for you to use

• For help setting the date and time, go to page 42.

• For instructions on making a call, go to page 19.

• For help personalising your phone’s settings, go to

page 35.

Or, you may ﬁnd the answer in the Help section

on page 52 or see our online frequently asked

questions at bt.com/producthelp

Alternatively, call the Helpline on 0800 218 2182*.

* Calls made from within the UK mainland network are free. Mobile and

international call costs may vary.

If you cannot ﬁnd the answer

to your problem in this user

guide, then please call our free

Helpline on 0800 218 2182*.

Our dedicated advisors are

more likely to be able to help

you than the retailer where you

made your purchase.

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

9In this guide

Getting to know your phone

Handset buttons..............................12

Handset display/display icons...........14

Finding your way around

your phone......................................15

Menu map.......................................16

Base................................................18

Using the phone

Make an external call .......................19

Preparatory dialling .........................19

End a call.........................................19

Switch the handset on or off.............19

Receive a call...................................20

Call Waiting .....................................20

Mute...............................................21

Incoming speech volume..................21

Redial .............................................21

Voicemail (1571) .............................22

Keypad lock.....................................22

Turn the handset ringer on or off.......23

Finding handset (paging) .................23

Contacts

Store a contact name and number ....24

Character map .................................25

View/dial a contact ..........................25

Edit a contact ..................................26

Delete a contact ..............................26

Delete all contacts ...........................27

View the contact memory status.......27

Copy a contact (only available if you

have more than one handset) ...........28

Copy all contacts (only available if you

have more than one handset) ...........29

Speed dial

Save a speed dial entry.....................30

Dial a speed dial entry......................31

Edit a speed dial entry......................31

Delete a speed dial entry..................31

In this guide

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Caller Display and the Calls list

Caller Display...................................32

Calls list...........................................32

Missed call notiﬁcation.....................33

View/dial an entry in the Calls list......33

Save a Calls list entry to your

contacts..........................................33

Delete an entry in the Calls list ..........34

Delete the entire Calls list .................34

Settings

Set the handset ringtone for external

or internal calls ................................35

Set the handset ringer volume..........35

Turn the handset tones on or off .......36

Change the handset name................37

Change the handset display contrast.37

Change the call settings ...................38

Set the base ringtone.......................38

Set the base ringer volume ...............39

Set a PBX access code ......................39

Change the system PIN.....................40

Reset the handset or base settings ....40

Reset the handset or base user data ..41

Clock/Alarm

Set the time format (12 or 24 hour) ..42

Set the time and date.......................42

Set an alarm ...................................43

Stopping the alarm when it goes off .. 43

BT Calling Features

Pre-stored numbers in the Calling

Features menu.................................44

Using Call Diversion..........................45

Using Ringback................................45

Using Call Waiting ...........................46

Using Reminder call .........................46

Using Call Barring ............................47

Using Anonymous call reject.............47

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de BT

BT BT3110 Hoja de especificaciones

BT AQUA Manual de usuario

BT Synergy 3500 Manual de usuario

BT Synergy 3200 SMS Manual de usuario

BT FREESTYLE 7250 Manual de usuario

BT DIVERSE 3010 CLASSIC Manual de usuario

BT BT3950 Nuisance Call Blocker Hoja de especificaciones

BT DIVERSE 4016 CLASSIC Manual de usuario

BT FREESTYLE 4100 Manual de usuario

BT Freestyle 710 Manual de usuario

BT ON-AIR 1100 EXECUTIVE Manual de usuario

BT CALLER DISPLAY 1000 Manual de usuario

BT GRAPHITE 1100 Manual de usuario

BT Diverse 6150 Manual de usuario

BT VERVE 500 Manual de usuario

BT FREESTYLE 1100 PLUS Manual de usuario

BT FREESTYLE 3200 Manual de usuario

BT BT2600 Manual de usuario

BT DIVERSE 5410 Manual de usuario

BT DIVERSE 3010 EXECUTIVE Manual de usuario

BT HUB PHONE 1020 Manual de usuario

BT DIVERSE SOLO Manual de usuario

BT DIVERSE 3010 EXECUTIVE Manual de usuario

BT FREESTYLE 4100 Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

Panasonic

Panasonic KX-TGK210HK Manual de usuario

Panasonic

Panasonic KX-TCA181EX Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Panasonic

Panasonic KX-TG1831NZ Manual de usuario

Panasonic

Panasonic KX-TG7301E Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración

AT&T

AT&T 7625 Manual de usuario