Brother NX-200 Manual de usuario

Otros manuales para NX-200

4

Este manual sirve para los siguientes modelos

6

Tabla de contenidos

Otros manuales de Máquina de coser de Brother

Brother

Brother LS-1717 Manual de usuario

Brother

Brother 882-W30 Manual de instalación

Brother

Brother LH4-B814 Manual de instrucciones

Brother

Brother LB6770 PRW Manual de usuario

Brother

Brother XL-3600 Manual de usuario

Brother

Brother 3534DT Manual de usuario

Brother

Brother LK3-B432 Manual de usuario

Brother

Brother 885-E33 Manual de usuario

Brother

Brother PS-2200 Manual de usuario

Brother

Brother NV 1250 Manual de usuario

Brother

Brother HS-2500 Guía de configuración

Brother

Brother XL-3030 Manual de usuario

Brother

Brother EF4-V41 Manual de usuario

Brother

Brother Sewing Machine Manual de usuario

Brother

Brother PE-700II Manual de usuario

Brother

Brother Simplicity SB530T Manual de usuario

Brother

Brother NX-200 Manual de usuario

Brother

Brother CB3-B917 Manual de usuario

Brother

Brother XL-5600 Guía de configuración

Brother

Brother 885-V35 Manual de usuario

Brother

Brother DA-9280 Manual de usuario

Brother

Brother T-8421D Manual de usuario

Brother

Brother Innov-is VE2300 Manual de usuario

Brother

Brother BAS-750 Manual de usuario

Manuales populares de Máquina de coser de otras marcas

Riccar

Riccar RL634DE Manual de usuario

Singer

Singer 2517 Manual de usuario

Pfaff

Pfaff 3307-1 SERIES Manual de usuario

Janome

Janome Quilt Maker Pro 18 VERSA Manual de usuario

Siruba

Siruba C007JP Manual de usuario

Husqvarna Viking

Husqvarna Viking Designer SE Manual de usuario

Singer

Singer 148-5 Manual de usuario

IKEA

IKEA SY Manual de usuario

Pfaff

Pfaff 571 Manual de usuario

Singer

Singer 15-91 Manual de usuario

Pegasus

Pegasus WT100 Series Manual de usuario

Reliable

Reliable 7100DB Manual de usuario

Pfaff

Pfaff 937 Manual de usuario

Singer

Singer 6038 Manual de usuario

Singer

Singer 413K Manual de usuario

Pfaff

Pfaff 1471 E1 Manual de usuario

Kenmore

Kenmore 16677 - Serger Sewing Machine Manual de usuario

HIGHLEAD

HIGHLEAD GC2008-M Manual de usuario

GENERAL INFORMATION

This service manual has been compiled for explaining repair procedures of this MODEL.

This was produced based on up-to-date product specifications at the time of issue, but there may have been

changes of specifications for the purpose of improvements.

Contact manufacturer or local sales company for information concerning such changes.

Brother Industries, Ltd.

Nagoya, Japan

CAUTION

1. Always use rubber gloves when handling printed circuit boards and never touch the metal portion of a printed

circuit board with bare hands.

2. Keep your body earthed in order to avoid generating static electricity.

3. Pack printed circuit boards in aluminum foil and avoid subjecting them to any form of impact during storage or

transportation.

4. Do not touch or damage the metal portion of a printed circuit board with a screwdriver or any other tool while

making repairs or the like.

CONTENTS

2.Disassembly 2-1

Main parts

Front cover disassembly (operation PCB assy disassembly) 2-2

Needle-presser module

Presser foot lifter removal 2-3

3.Assembly 3-1

Main parts

Front cover assembly (assembling the operation PCB holder) 3-2

Needle-presser module

Presser foot lifter attachment 3-3

4.Ajustment 4-1

Test Mode 4-2

2 - 1

2Disassembly

2 - 2

Main unit Main parts

8 Front cover disassembly (operation PCB assy disassembly)

1. Remove the screws 1(four) and remove the operation PCB assembly 1,

rubber keys 2, key top rear plate 3and VR key tops 4(two).

1

11

43

2

2-6

2 - 3

Modules Needle-presser module

22 Presser foot lifter removal

1. Remove retaining ring E4.

2. Remove the presserlift shaft 1, presserfoot lifter2. and washers (two).

3. Remove retaining ring E4 fromthe presserlift shaft 1.

21

2-37

2 - 4

3 - 1

3Assembly

3 - 2

Main unit Main parts

9

Front cover assembly (assembling the operation PCB holder)

1. Attach the rubber keys 1to the operation PCB holder 2.

2. Attach the VR key tops 3(two) and key top rear plate 4to the operation

PCB holder 2.

•Attach the operation F0 PCB assy. 5using the screw 1(four).

1Torque

0.57 – 0.78 N·m

3

1

1

1

5

42

Taptite, Bind B

M3X8

Color; Gold

3-35

3 - 3

Modules Needle-presser module

13 Presser foot lifter attachment

1. Attach retaining ring E4 to the presser lift shaft 1.

2. Apply a small amount of Molykote EM30L to the presserlift shaft 1.

3. Insert the presser lift shaft 1into the hole 2in the thread releaser assy.

and attach the washers (two). and presserfoot lifter3.

4. Attach retaining ring E4 to the presser lift shaft 1.

Apply Molykote EM30L grease to the operating

surface of the presser lifter shaft presser foot

lifter. Small amount

Apply Molykote EM30L grease to the operating

surface of the presser foot lifter presser bar

clamp Small amount

1

2

Retaining ring E4

3

Retaining ring E4

Puttwowashersunder the presserfootlifter.

3-46

3 - 4