Brother HL-4150CDN Manual de usuario

User’s Guide

PANTONE2728

Safety and Legal

Basic User’s Guide

Version 0

USA/CAN

Please read this booklet before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of personal injury

or damage to property, including through fire, electrical shock, burns or suffocation.

Symbols and

conventions used in

the documentation A

The following symbols and conventions are

used throughout the documentation.

Follow all warnings and instructions marked

on the product.

Note

The illustrations in this guide show the

HL-4150CDN.

(HL-4150CDN) In USA:

Please go to the Brother Solutions Center at

http://solutions.brother.com/ and click

Manuals on your model page to download

the other manuals.

Safety and Legal A

(HL-4150CDN / 4570CDW(T))

Bold Bold typeface identifies specific

keys on the product’s control

panel, on the computer screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in Courier New font

identifies messages on the

LCD of the product.

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

WARNING

CAUTION

IMPORTANT

Notes tell you how you should

respond to a situation that may arise

or give tips about how the operation

works with other features.

Electrical Hazard icons alert you to

possible electrical shock.

Improper Setup icons alert you to

devices and operations that are not

compatible with the product.

Hot Surface icons warn you not to

touch product parts that are hot.

Compilation and Publication A

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choosing a location A

Put your product on a flat, level, stable surface that is free of vibration and shocks, such as a desk.

Put the product near a standard grounded AC power outlet. Choose a location where the

temperature remains between 50°F and 90.5°F (10°C and 32.5°C) and the humidity is between

20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, salty or corrosive

gasses, moisture or dust. Doing so may create a risk of an electrical short or fire. It may also

damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fan, refrigerators, or water.

Doing so may create the risk of a short circuit or fire, should water come into contact with the

product (including condensation caused by heating/air conditioning/ventilation equipment).

DO NOT place the product near chemicals. Should the chemicals come into contact with the

product, there may be a risk of fire. The chemicals may also cause the product to malfunction

or become discolored.

DO NOT put the product in a location where any slot or opening in the product is obstructed or

blocked. These slots and openings are provided for ventilation. Blocking the product’s

ventilation could create a risk of overheating and/or fire.

Instead:

• Keep a gap of roughly 4 in. (100 mm) between the ventilation hole and the wall.

• Place the product on a solid surface, never on a bed, sofa, rug, or other similar soft surface.

• Do not place this product near or over a radiator or heater.

• Do not place this product in a “built-in” installation unless adequate ventilation is provided.

DO NOT put objects on top of the product. Doing so could increase the risk of overheating

and/or fire should the product malfunction.

DO install your product near an AC power outlet that is easily accessible. In the event of an

emergency, easy access to the plug and outlet will allow you to shut off power to the product

quickly and completely.

Plastic bags are used in the packing of your product and drum unit. Plastic bags are not toys.

To avoid the danger of suffocation, keep these bags away from babies and children and dispose

of them properly.

CAUTION

Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure

that the product is in a safe location where it cannot be accidentally knocked-over, which could

cause injury to you and serious damage to the product. Also ensure that cords are secured so

as not to pose a tripping hazard. DO NOT place this product on an unstable cart, stand, or table.

The product is heavy and may fall, causing injury to you, and serious damage to the product.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic fields.

Doing so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic

timers. Disruption of power can delete information from the product's memory.

• DO NOT connect your product to an AC power outlet on the same circuit as large appliances

or other equipment that requires a significant amount of electricity to operate. Operating this

product in conjunction with the other product(s) could create an overvoltage, tripping your

circuit breaker or blowing your fuse.

To use the product safely A

Please keep these instructions for later reference and read them before attempting any

maintenance. If you do not follow these safety instructions, there is a possibility of a fire, electrical

shock, burn or suffocation.

WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In

addition, you could create an electrical short, which may create the risk of a fire.

There are high voltage electrodes inside the product. Before you access the inside of the

product, including for routine maintenance such as cleaning, make sure you have unplugged the

power cord from the AC power outlet, as well as Ethernet (RJ-45) cables (Network models only)

from the product. Never push objects of any kind into this product through cabinet slots, since

they may touch dangerous voltage points or short out parts.

DO NOT handle the plug with wet hands.

Always make sure the plug is fully inserted. Do not use the product or handle the cord if the cord

has become worn or frayed.

DO NOT use this product during an electrical storm.

DO NOT allow this product to come into contact with water. This product should not be used

around standing water including a bathtub, sink, or swimming pool, around appliances

containing water including a refrigerator, or in a wet basement.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind

of power source you have, contact a qualified electrician.

Power Cord Safety:

• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call

your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded

plug.

• Use only the power cord supplied with this product.

• DO NOT allow anything to rest on the power cord. DO NOT place this product where people

can walk on the cord. Do not place this product in a position where the cord is stretched or

strain is otherwise put on the cord. Doing so may cause the cord to become worn or fray.

• If an extension cord is used with this product, make sure that the total ampere ratings on the

products plugged into the extension cord. DO NOT exceed the extension cord ampere rating.

Also, make sure that the total of all products plugged into the AC power outlet does not

exceed 15 amperes.

• The power cord, including extensions, should be no longer than 16.5 feet (5 meters).

FIRE HAZARDS

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing

alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire.

Instead, use only a dry, lint-free cloth. See Routine Maintenance in the User's Guide for more

information on how to clean the product.

DO NOT attempt to operate this product with a paper jam or with stray pieces of paper inside

the product. Prolonged contact of the paper with the drum unit could cause a fire.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

DO NOT use this product in the vicinity of a gas leak or combustible dust.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait for the product to cool down before you touch the internal parts of the product.

DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high

speed and can pinch or entrap your hand.

Languages on the label may vary depending on your country.

• This product is heavy and weighs more than 46.3 lb (21.0 kg) for Printer. To prevent injuries

when moving or lifting this product, make sure to use at least two people. Be careful not to

pinch your fingers when you set the product back down.

• If you use a Lower Tray, carry it separately from your product.

IMPORTANT

DO NOT remove or damage the caution labels located on or around the fuser.

Lightning and power surges can damage this product! We recommend that you use a quality

surge protection device on the AC power line or Ethernet (RJ-45) cable (Network models only)

plugged into the product, or that you unplug the cords during a lightning storm.

Important safety instructions A

1 Read all of these instructions.

2 Save them for later reference.

3 Follow all warnings and instructions marked on the product.

4 Be careful not to inhale toner.

5 DO NOT place anything in front of the product that will block printed pages. DO NOT place

anything in the path of printed pages.

6 Wait until pages have exited the product before picking them up.

7 DO NOT attempt to service this product yourself because opening or removing covers may

expose you to dangerous voltage points and other risks and may void your warranty. Refer all

servicing to a Brother Authorized Service Center. For the location of your nearest Brother

Authorized Service Center, please call:

In USA: 1-877-BROTHER (1-877-276-8437)

In Canada: 1-877-BROTHER

8 Unplug this product from the AC power outlet and refer all servicing to Brother Authorized

Service Personnel under the following conditions:

When the power cord is damaged or frayed. (Do not touch the damaged/frayed part while

unplugging your product.)

If liquid has been spilled into the product.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions. Improper

adjustment of other controls may result in damage and will often require extensive work by

a qualified technician to restore the product to normal operation.

If the product has been dropped or the casing has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

9 For Material Safety Date Sheet for applicable accessories, visit http://www.brother.com/. (USA

only)

Otros manuales para HL-4150CDN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Brother

Brother

Brother HL-B2000D Manual de usuario

Brother

Brother HL-5280DW Manual de usuario

Brother

Brother HL-720 - B/W Laser Printer Manual de usuario

Brother

Brother HL-5040 Manual de usuario

Brother

Brother HL-7050 Series Manual de usuario

Brother

Brother HL-6050 Manual de usuario

Brother

Brother HL-1050 Manual de uso y cuidado

Brother

Brother P-touch 2430PC Actualización de firmware

Brother

Brother MFC7840CW Manual de instrucciones

Brother

Brother HL 2040 Manual de usuario

Brother

Brother HL 1240 - B/W Laser Printer Manual de usuario

Brother

Brother HL-S7000DN Series Instrucciones de instalación

Brother

Brother RuggedJet RJ-4030 Manual de usuario

Brother

Brother HL-4150CDN Manual de usuario

Brother

Brother QL-820NWB Manual de usuario

Brother

Brother DCP-T510W Manual técnico

Brother

Brother HL-L5000D Manual de usuario

Brother

Brother HL-1240 Manual del propietario

Brother

Brother GT-3 Series Manual de usuario

Brother

Brother MPrint MW-140BT Manual de usuario

Brother

Brother GTX pro Guía del usuario

Brother

Brother HL-1118 Manual de funcionamiento

Brother

Brother HL-5240 Manual de usuario

Brother

Brother HL-L3210CW Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario