Brother HL-3140CW Manual de instalación y funcionamiento

Version A

USA/CAN

Using the Documentation A

Please read this guide before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of personal injury

or damage to property, including through fire, electrical shock, burns or suffocation. Brother shall

not be liable for damage caused where the product owner has failed to follow the instructions set

out in this guide.

Read all of the instructions. Save them for later reference.

Symbols and conventions

used in the documentation A

The following symbols and conventions are

used throughout the documentation.

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

Notes tell you how you should respond to a

situation that may arise or give tips about how

the operation works with other features.

Follow all warnings and instructions marked

on the product.

NOTE

• Not all models are available in all

countries.

• The illustrations in this guide show the

HL-3170CDW and MFC-9340CDW.

(HL-3140CW / HL-3170CDW / MFC-9130CW /

MFC-9330CDW / MFC-9340CDW) In USA:

Please go to the Brother Solutions Center at

http://solutions.brother.com/ and click

Manuals on your model page to download the

other manuals.

Product Safety Guide A

(HL-3140CW / HL-3170CDW / DCP-9020CDN / MFC-9130CW /

MFC-9330CDW / MFC-9340CDW)

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Hot Surface icons warn you not to

touch product parts that are hot.

Prohibition icons indicate actions

that must not be performed.

Bold Bold typeface identifies specific

keys on the product’s control

panel or on the computer

screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in Courier New font

identifies messages on the

LCD of the product.

Compilation and Publication A

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choosing a location A

Put your product on a flat, level, stable surface free from vibration and shocks, such as a desk.

Put the product near a telephone wall jack (MFC only) and a standard grounded AC power outlet.

Choose a location where the temperature remains between 50F and 90.5F (10C and 32.5C)

and the humidity is between 20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust. Doing so may create a risk of an electrical shock, short circuit or fire. It may

also damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.

Doing so may create the risk of an electrical shock, short circuit or fire, as water may come into

contact with the product (including condensation caused by heating/air conditioning/ventilation

equipment).

DO NOT place the product near chemicals or in a place where chemicals could be spilled on it.

Should chemicals come into contact with the product, there may be a risk of fire or electric

shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,

or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or

electric shock. These or other chemicals may also cause the product to malfunction or become

discolored.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product’s ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a gap of at least 6 in. (150 mm) between the ventilation hole and the wall.

• Place the product on a solid level surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.

DO install your product near an AC power outlet that is easily accessible. In the event of an

emergency, easy access to the plug and outlet will allow you to shut off power to the product

quickly and completely.

Plastic bags are used in the packing of your product. Plastic bags are not toys. To avoid the

danger of suffocation, keep these bags away from babies and children and dispose of them

properly.

CAUTION

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product. Also ensure that cords are secured

so as not to pose a tripping hazard.

DO NOT eat the silica gel pack, please throw it away. If ingested seek medical attention

immediately.

DO NOT place heavy objects on the product.

DO NOT place this product on an unstable cart, stand, or table, particularly if children are

expected to be near the product. The product is heavy and may fall, causing injury to you or

others and serious damage to the product. For MFC and DCP products, there is an added risk

of injury if the scanner glass should break.

IMPORTANT

• DO NOT put objects on top of the product. Doing so could increase the risk of overheating

should the product malfunction.

• DO NOT place your product next to devices that contain magnets or generate magnetic fields.

Doing so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non-Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic

timers. Disruption of power can delete information from the product's memory.

• DO NOT connect your product to an AC power outlet on the same circuit as large appliances

or other equipment that requires a significant amount of electricity to operate. Operating this

product in conjunction with the other product(s) could create an overvoltage, tripping your

circuit breaker or blowing your fuse.

To use the product safely A

Please keep these instructions for later reference and read them before attempting any

maintenance. If you do not follow these safety instructions, there is a possibility of a fire, electrical

shock, burn or suffocation.

WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In

addition, you could create an electrical short, which may create the risk of a fire.

There are high voltage electrodes inside the product. Before you access the inside of the

product, including for routine maintenance such as cleaning, make sure you have unplugged the

telephone line cord first (MFC only) and then the power cord from the AC power outlet, as well

as any telephone (RJ-11) (MFC only) or Ethernet (RJ-45) cables (Network models only) from

the product. Never push objects of any kind into this product through cabinet slots, since they

may touch dangerous voltage points or short out parts.

DO NOT handle the plug with wet hands.

Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if the

cord has become worn or frayed.

DO NOT use this product during an electrical storm.

DO NOT allow this product to come into contact with water. This product should not be used

around standing water, including a bath tub, sink, or swimming pool; around appliances

containing water, including a refrigerator; or in a wet basement.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind

of power source you have, contact a qualified electrician.

Power Cord Safety:

• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call

your electrician to replace your obsolete outlet. DO NOT attempt to defeat the purpose of the

grounded plug.

• Only use the power cord supplied with this product.

• This product should be positioned so that nothing pinches or constricts the power cord. DO

NOT allow anything to rest on the power cord. DO NOT place this product where people may

step on the cord. DO NOT place this product in a position where the cord is stretched or

where strain is otherwise put on the cord. Doing so may cause the cord to become worn or

frayed.

• Brother strongly recommends that you DO NOT use any type of extension cord.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged from the wall jack.

Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a

location that is wet or may become wet, for example, near a refrigerator or other appliance that

produces condensation.

• DO NOT put a toner cartridge, a toner cartridge and drum unit assembly, or a waste toner

box into a fire. It could explode, resulting in injuries.

• DO NOT use flammable substances, any type of spray, or an organic solvent/liquid

containing alcohol or ammonia to clean the inside or outside of the product. Doing so could

cause a fire or electrical shock. Instead, use only a dry, lint-free cloth. For instructions on how

to clean the product, see User's Guide/Basic User's Guide: Routine Maintenance.

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside

the product. Prolonged contact of paper with the fuser unit could cause a fire.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Should you come into contact with toner, follow these instructions:

• Inhalation

Obtain immediate medical attention. In case of accident by inhalation remove casualty to

fresh air and keep at rest.

• Skin contact

Remove contaminated clothing immediately and wash affected skin with plenty of water or

soap and water.

• Eye contact

Obtain medical attention. If substance has got into the eyes, immediately wash out with

plenty of water for at least 15 minutes.

• Ingestion

Obtain immediate medical attention. Wash out mouth with water and give 200 - 300 ml (half

a pint) of water to drink.

For more safety information regarding the toners used in your product, please visit the following

web address to read the Safety Data Sheets (SDS) http://sds.brother.co.jp/sdsapp/index.html.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

(MFC and DCP only)

This product is heavy and weighs more than 44.1 lb. (20.0 kg). To prevent possible injuries, at

least two people should lift the product. One person should hold the front of the product, and

one person should hold the back, as shown in the illustration below. Be careful not to trap your

fingers when you put the product down.

CAUTION

(MFC and DCP only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations, and DO NOT close the covers

with force.

(MFC and DCP only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

IMPORTANT

DO NOT remove or damage any of the caution or warning labels inside the product.

200°C

390°F

200°C

390°F

Otros manuales para HL-3140CW

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Brother

Brother

Brother Remote Printer Manual de usuario

Brother

Brother GTXpro BULK DTF R2R Manual de usuario

Brother

Brother HL-3160CDW Manual técnico

Brother

Brother HL-730 Manual de usuario

Brother

Brother HL-L2380DW Manual de usuario

Brother

Brother ReChargX RX417XX Manual de usuario

Brother

Brother DCP-9040CN Manual de usuario

Brother

Brother HL-3040CN Guía de inicio rápido

Brother

Brother DCP-L2560DW Manual de operación y mantenimiento

Brother

Brother m-PRINT MW-120 Manual de usuario

Brother

Brother 206627 Manual de usuario

Brother

Brother 1435 - HL B/W Laser Printer Manual de usuario

Brother

Brother MFC-9330CDW Manual de usuario

Brother

Brother HL-JF1 Manual de usuario

Brother

Brother PT 1000 - P-Touch 1000 B/W Thermal Transfer... Manual de lista de piezas

Brother

Brother MFC-J4620DW Manual de operación y mantenimiento

Brother

Brother WL-660 Series Manual de usuario

Brother

Brother HL-1020 Manual de usuario

Brother

Brother MFC-T910DW Manual de usuario

Brother

Brother m-PRINT MW-100 Manual de usuario

Brother

Brother HL 5280DW - B/W Laser Printer Manual de usuario

Brother

Brother HL-2250DN Manual de usuario

Brother

Brother DCP-L3520CDW Manual de usuario

Brother

Brother DCP-J525W Manual de operación y mantenimiento

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario