Brother HL-2260D Manual de funcionamiento

Version 0

CHN-ENG

Please read this guide before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation. Brother shall not be liable for damage caused where the product

owner has failed to follow the instructions set out in this guide.

How to use this guide: A

1 Read the whole guide before using your product.

Keep the User's Guide in a secure place for future reference.

2 Carefully follow the instructions set out in this guide and always ensure that you follow all

warnings and instructions marked on the product.

3 If you have concerns about how to use your product having read this guide, please refer to

Brother customer service or your local Brother dealer.

4 To ensure you understand all of the instructions, study the symbols and conventions used in

the documentation.

5CAUTION:

Before using this product, read carefully these instructions for correct operation.

Product Safety Guide A

(HL-2260 / HL-2260D / HL-2560DN / DCP-7080 / DCP-7080D / DCP-7180DN /

MFC-7380 / MFC-7480D / MFC-7880DN)

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

Symbols and conventions used in the

documentation A

The following symbols and conventions are used throughout the documentation.

Follow all warnings and instructions marked on the product.

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

NOTE specifies the operating environment,

conditions for installation, or special

conditions of use.

NOTE

The illustrations in this guide show the

HL-2560DN, DCP-7180DN and

MFC-7880DN.

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Hot Surface icons warn you not to

touch product parts that are hot.

Prohibition icons indicate actions

that must not be performed.

Bold Bold typeface identifies specific

buttons on the product’s control

panel or on the computer

screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the product.

[XXXX] Text in brackets identifies

messages on the LCD of the

product. (MFC and DCP only)

Compilation and Publication Notice A

This manual has been compiled and published to provide the latest product safety information at

the time of publication. The information contained in this manual may be subject to change.

For the latest manual, please visit us at http://support.brother.com.

Choose a safe location for your product A

WARNING

Choose a location where the temperature remains between 10°C and 32°C, the humidity is

between 20% to 80%, and where there is no condensation. To ensure the high print quality, the

maximum ambient temperature we recommend is 32°C. The maximum ambient temperature to

safely use this machine is 35°C.

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust. Doing so may create a risk of an electrical shock, short circuit or fire. It may

also damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.

Doing so may create the risk of an electrical shock, short circuit or fire, as water may come into

contact with the product (including condensation caused by heating/air conditioning/ventilation

equipment).

DO NOT place the product near chemicals or in a place where chemical spillage could occur. In

particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve,

risking fire or electric shock. They may also cause the product to malfunction or become

discoloured.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product’s ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a minimum gap around the product as shown in the illustration.

• Place the product on a solid level surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.

100 mm

120 mm

100 mm

250 mm

100 mm

CAUTION

Place your product in an adequately ventilated environment.

This product emits some chemical substances during printing, and additionally if used for

prolonged periods or in poorly ventilated areas may cause the emission of odorous gases such

as ozone. Place the product in a well ventilated area for optimum performance and comfort.

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product. Also ensure that cords are secured

so as not to pose a tripping hazard.

DO NOT place heavy objects on the product.

DO NOT place this product on an unstable cart, stand, or table. The product is heavy and may

fall, causing injury to you and serious damage to the product. For MFC and DCP products, there

is an added risk of injury if the scanner glass should break. Particularly, if you have children,

please make sure the product is located in a safe position.

Put your product on a flat, level, stable surface free from vibration and shocks, such as a desk.

Put the product near a telephone socket (MFC only) and a standard earthed electrical socket.

IMPORTANT

• DO NOT connect your product to electrical sockets controlled by wall switches or automatic

timers, or to the same circuit as large appliances, such as an air conditioner, copier, shredder,

etc. that might disrupt the power supply.

• DO NOT put objects on top of the product. Doing so could increase the risk of overheating

should the product malfunction.

• DO NOT place anything in front of the product that will block printed documents or faxes (MFC

only).

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non-Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• Disruption of power can delete information from the product’s memory.

General precautions A

WARNING

Plastic bags are used in the packing of your product. To avoid danger of suffocation, keep these

plastic bags away from babies and children. Plastic bags are not toys.

For users with pacemakers

This product generates a weak magnetic field. If you experience any unusual symptons with

your pacemaker while near the product, move away from the product and consult a doctor

immediately.

DO NOT use this product during an electrical storm. There may be a remote risk of an electric

shock from lightning.

DO NOT put a toner cartridge or a toner cartridge and drum unit assembly into a fire. It could

explode, resulting in injuries.

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing

alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire or

electrical shock. Instead, use only a dry, lint-free cloth.

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside

the product. Prolonged contact of paper with the fuser unit could cause a fire.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Unplug this product from the wall socket before cleaning the product and the scanner glass

(MFC and DCP only). DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for

cleaning.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

CAUTION

(DCP only)

When you move the product, grasp the side handholds that are under the scanner. DO NOT

carry the product by holding it at the bottom.

(MFC only)

When you move the product, grasp the handset holder and the side handhold that are under the

scanner. DO NOT carry the product by holding it at the bottom.

(MFC and DCP only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations, and DO NOT close the covers

with force.

(For DCP models) (For MFC models)

(MFC and DCP only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

If the product is not being used to receive faxes, unplug it from the power outlet if it is not going

to be used for a long time.

DO NOT attempt to dismantle a toner cartridge. If toner powder should leak out, avoid inhaling

it or letting it come in contact with your skin. If either should happen refer to the Safety Data

Sheets (SDS) at http://sds.brother.co.jp/sdsapp/index.html.

Keep the toner cartridge out of the reach of children. If toner powder is swallowed, consult a

doctor immediately and refer to the Safety Data Sheets (SDS) at

http://sds.brother.co.jp/sdsapp/index.html.

We recommend placing the toner cartridge and drum unit assembly on a clean, flat surface with

disposable paper underneath it in case you accidentally spill or scatter toner. If toner scatters

on your hands or clothes, immediately wipe or wash it off with cold water.

Should you come into contact with toner, follow these instructions:

• Inhalation

Obtain immediate medical attention. In case of accident by inhalation remove casualty to

fresh air and keep at rest.

• Skin contact

Remove contaminated clothing immediately and wash affected skin with plenty of water or

soap and water.

• Eye contact

Obtain medical attention. If substance has got into the eyes, immediately wash out with

plenty of water for at least 15 minutes.

• Ingestion

Obtain immediate medical attention. Wash out mouth with water and give 200 - 300 ml (half

a pint) of water to drink.

For more safety information regarding the toners used in your product, please visit the following

web address to read the Safety Data Sheets (SDS) http://sds.brother.co.jp/sdsapp/index.html.

IMPORTANT

DO NOT remove or damage any of the caution or warning labels inside the product.

200°C / 396°F

200°C

396°F

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Brother

Brother

Brother MFC-6890CDW - Color Inkjet - All-in-One Manual de usuario

Brother

Brother DCP-T520W Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de operación y mantenimiento

Brother

Brother MFC 795CW - Color Inkjet - All-in-One Manual de usuario

Brother

Brother MFC-J2740DW Manual de funcionamiento

Brother

Brother MFC-5460CN Manual de usuario

Brother

Brother DCP-19010CN Manual de usuario

Brother

Brother MFC-L2712DW Manual de usuario

Brother

Brother MFC-J625DW Manual de operación y mantenimiento

Brother

Brother MFC 665CW - Color Inkjet - All-in-One Manual de usuario

Brother

Brother MFC-J220 Instrucciones de montaje

Brother

Brother DCP-7055W Manual de usuario

Brother

Brother MFC-8500 Manual de usuario

Brother

Brother MCF-L8600CDW Manual de usuario

Brother

Brother DCP?1618W Manual de usuario

Brother

Brother HL-2560DN Manual de usuario

Brother

Brother DCP-J100 Manual de usuario

Brother

Brother DCP-1000 Manual de usuario

Brother

Brother HL-4040CN Manual técnico

Brother

Brother DCP-1400 Manual de usuario

Brother

Brother MFC-J825DW Manual de usuario

Brother

Brother MFC-J5830DW Manual de usuario

Brother

Brother DCP-375CW Manual de usuario

Brother

Brother MFC-5895CW Manual de lista de piezas

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario

Copystar

Copystar CS 4551ci Manual de usuario

Konica Minolta

Konica Minolta Magicolor 4650EN Manual de usuario