Brother HL-2130 Manual de usuario

User’s Guide

PANTONE2728

Advanced User’s Guide

Safety and Legal

Basic User’s Guide

Version A

UK/IRE/SAF

Not all models are available in all countries.

Please read this booklet before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation.

Symbols and

conventions used in

the documentation A

The following symbols and conventions are

used throughout the documentation.

Follow all warnings and instructions marked

on the product.

Note

The illustrations in this guide show the

HL-2240D and MFC-7860DW.

Safety and Legal A

(HL-2130 / HL-2132 / HL-2240 / HL-2240D / HL-2242D / HL-2250DN /

HL-2270DW / DCP-7055 / DCP-7057 / DCP-7060D / DCP-7065DN /

DCP-7070DW / MFC-7360 / MFC-7362N / MFC-7360N / MFC-7460DN /

MFC-7470D / MFC-7860DN / MFC-7860DW)

Bold Bold typeface identifies specific

buttons on the product’s control

panel, on the computer screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the product.

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

WARNING

CAUTION

IMPORTANT

Notes tell you how you should

respond to a situation that may arise

or give tips about how the operation

works with other features.

Electrical Hazard icons alert you to

possible electrical shock.

Improper Setup icons alert you to

devices and operations that are not

compatible with the product.

Hot Surface icons warn you not to

touch product parts that are hot.

Compilation and Publication A

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choosing a location A

Put your product on a flat, level, stable surface that is free of vibration and shocks, such as a desk.

Put the product near a telephone socket and a standard grounded electrical socket. Choose a

location where the temperature remains between 10C and 32.5C and the humidity is between

20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust.

DO NOT place the product near heaters, air conditioners, desk fan, refrigerators, water or

chemicals.

CAUTION

Avoid placing your product in a high-traffic area.

DO NOT put the product where the ventilation holes of the product are blocked. Keep a gap of

roughly 100 mm between the ventilation holes and the wall.

DO NOT connect your product to electrical sockets controlled by wall switches or automatic

timers, or to the same circuit as large appliances that might disrupt the power supply.

Disruption of power can delete information from the product’s memory.

Avoid interference sources, such as other cordless telephone systems or speakers.

Make sure cables leading to the product do not constitute a trip hazard.

DO NOT eat the Silica Pack. Please discard. If ingested seek medical attention immediately.

To use the product safely A

WARNING

There are high voltage electrodes inside the product. Before you clean the inside of the product,

make sure you have unplugged the telephone line cord first (MFC only) and then the power cord

from the electrical socket. Doing this will prevent an electrical shock.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

This product must be installed near an electrical socket that is easily accessible. In case of an

emergency, you must unplug the power cord from the electrical socket to shut off the power

completely.

Plastic bags are used in the packing of your product and drum unit. Plastic bags are not toys.

To avoid the danger of suffocation, keep these bags away from babies and children and dispose

of them properly.

DO NOT use flammable substances near the product. DO NOT use any type of spray to clean

the inside or outside of the product. Doing this may cause a fire or electrical shock. See Routine

Maintenance in the User's Guide/Basic User's Guide for how to clean the product.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Be careful not to inhale toner.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged at the wall socket.

Never install telephone wiring during a lightning storm. Never install a telephone wall socket in

a wet location.

(MFC only)

When using your telephone equipment, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and injury to people, including the following:

1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink

or washing product, in a wet basement or near a swimming pool.

2 Avoid using this product during an electrical storm. There may be a remote risk of electric

shock from lightning.

3 DO NOT use this product to report a gas leak in the vicinity of the leak.

4 We DO NOT advise using an extension lead.

5 Never install telephone wiring during a lightning storm. Never install a telephone wall socket

in a wet location.

6 If any cables become damaged, disconnect your product, and contact your Brother dealer.

7 DO NOT place any objects on the product, or obstruct the air vents.

8 This product should be connected to an adjacent grounded AC power source within the

range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If

you are not sure, contact a qualified electrician.

SAVE THESE INSTRUCTIONS

CAUTION

(MFC and DCP only)

When you move the machine, grasp the side handholds that are under the scanner. DO NOT

carry the machine by holding it at the bottom.

(MFC and DCP only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations.

(MFC and DCP only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

CAUTION

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

To prevent injury, DO NOT touch the shaded parts shown in the illustration, when you open the

front or back cover (back output tray).

IMPORTANT

DO NOT remove or damage any of the caution or warning labels inside the product.

Inside the product

(Front View)

Inside the product

(Front View)

Inside the product

(Back View)

Important safety instructions A

1 Read all of these instructions.

2 Save these instructions for later reference.

3 Follow all warnings and instructions marked on the product.

4 Unplug this product from the wall socket before cleaning inside of the product. DO NOT use

liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.

5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing

serious damage to the product.

6 Slots and openings in the casing at the back or bottom are provided for ventilation. To ensure

reliable operation of the product and to protect it from overheating, these openings must not

be blocked or covered. The openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should never be placed near or over a radiator

or heater. This product should never be placed in a built-in installation unless adequate

ventilation is provided.

7 This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact

a qualified electrician.

8 This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call

your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded

plug.

9 Use only the power cord supplied with this product.

10 DO NOT allow anything to rest on the power cord. DO NOT place this product where people

can walk on the cord.

11 Use the product in a well-ventilated area.

12 The power cord, including extensions, should be no longer than 16.5 feet (5 metres).

DO NOT share the same power circuit with other high powered appliances, such as an air

conditioner, copier, shredder, and so on.

13 DO NOT place anything in front of the product that will block printed pages or received faxes.

DO NOT place anything in the path of printed pages or received faxes.

14 Wait until pages have exited the product before picking them up.

15 Unplug this product from the power socket and refer all servicing to Brother Authorized Service

Personnel under the following conditions:

When the power cord is damaged or frayed.

If liquid has been spilled into the product.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions. Incorrect

adjustment of other controls may result in damage and will often require extensive work by

a qualified technician to restore the product to normal operation.

If the product has been dropped or the casing has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

16 To protect your product against power surges, we recommend the use of a power protection

device (Surge Protector).

17 To reduce the risk of fire, electric shock and injury to people, note the following:

DO NOT use this product near appliances that use water, a swimming pool or in a wet

basement.

DO NOT use the product during an electrical storm (there is the remote possibility of an

electrical shock) or to report a gas leak (MFC only) in the vicinity of the leak.

DO NOT use this product in the vicinity of a gas leak.

Otros manuales para HL-2130

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Brother

Brother

Brother DCP-J100 Manual de funcionamiento

Brother

Brother MFC-9450CDN Manual de usuario

Brother

Brother MFC-6800 Manual de usuario

Brother

Brother MFC-J5340DW Manual de funcionamiento

Brother

Brother DCP-L2537DW Manual de usuario

Brother

Brother DCP-130C Manual de usuario

Brother

Brother DCP-9042CDN Manual de usuario

Brother

Brother MFC-6800 Manual de usuario

Brother

Brother MFC 6890CDW Manual de usuario

Brother

Brother MFC9800 - MFC 9800 B/W Laser Manual de usuario

Brother

Brother dcp-9015cdw Manual de funcionamiento

Brother

Brother MFC-J2320 Manual de operación y mantenimiento

Brother

Brother MFC 3220C - Color Inkjet - All-in-One Manual de usuario

Brother

Brother MFC-J4410DW Guía del usuario

Brother

Brother MFC-860 Manual de usuario

Brother

Brother MFC-J245 Manual de operación y mantenimiento

Brother

Brother DCP-9040CN Manual de usuario

Brother

Brother DCP-145C Manual de usuario

Brother

Brother MFC-9700 Manual de usuario

Brother

Brother MFC-J6920DW Manual de operación y mantenimiento

Brother

Brother FAX1 570MC Manual de usuario

Brother

Brother Laser MFC-4800 Manual de usuario

Brother

Brother MFC-8500 Manual de usuario

Brother

Brother 9840CDW - Color Laser - All-in-One Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario

Copystar

Copystar CS 4551ci Manual de usuario

Konica Minolta

Konica Minolta Magicolor 4650EN Manual de usuario