BrookVent AirVent SM 1200+ Manual de usuario

User Guide

brookvent.co.uk

Installation Instructions

1. Prepare the slots and pre drill the holes as per Table 1 (overleaf) avoiding glazing rebates.

2. For added weather performance silicon sealant should be used in the groove in the top of the hood.

3. Screws should be Pan-head screws (e.g. No.6 x 5/8 self-tap Pan Pozi S/S A2). Do not use Countersunk screws.

4. The screw should be suitable for the material it is being used in.

Fitting the Internal Vent (See Table 1)

1. Ensure that the vent is in the closed position (check that the hole in the ﬁxing wedge is concentric with the hole in

the vent body).

2. Screw the vent to the frame (care should be taken not to over tighten the screws).

3. Insert the vent screw cover caps.

Fitting the External Hood (See Table 1)

1. Place the hood over the slot ensuring that the slot is completely covered.

2. Screw the hood to the frame (care should be taken not to over tighten the screws).

3. Insert the hood screw cover caps.

1. Endcap Blank

2. Endcap Wedge

3. Endcap Control

4. Vent Body

5. SM1200+ RH Rack

6. Pinion

7. Foam Seal

8. Rod Sub Assembly

9. Vent screw cover caps

User Guide

brookvent.co.uk

Installation Dimensions

Table 1

Min Equivalent

Open Area

(sq.mm)

2500

3000

3500

4000

O/A Slot

Height

(mm)

O/A Slot

Length

(mm)

O/A Vent

Length

(mm)

Vent Hole

Centres

(mm)

O/A Hood

Length

(mm)

Hood Hole

Centres

(mm)

4500

5000

255

300

350

395

440

485

355

400

450

495

540

585

312

357

407

452

497

542

300

345

395

440

485

530

284

329

379

424

469

514

Operation

1. To open the vent, grip the control rod as indicated and rotate until fully open.

2. To close the vent, grip the control rod as indicated and rotate until fully closed.

3. Do not block the internal vent or external hood

For the ventilation to work eﬀectively the vent should be left in the open position as much as possible to maintain the

indoor air quality and a healthy indoor environment.

Please note that if the rod attachment is removed it cannot be reinserted.

Cross Section Dimensions

User Guide

brookvent.co.uk

Maintenance

The SM1200+ requires very little maintenance other than the occasional cleaning.

.Wipe the ventilator with a clean damp cloth. The frequency at which this needs to be done is dependent on local

conditions.

.Clean away blockages with a soft brush or cloth.

.Do not lubricate.

.Where there is access and it is safe to do so; the above instructions also apply to the hood.

Tabla de contenidos

Otros manuales de Admirador de BrookVent

BrookVent

BrookVent Aircycle 1.1 Manual de instrucciones

BrookVent

BrookVent AS 92-ACE-H-125 Guía del usuario

BrookVent

BrookVent aircycle 4.1 Manual de usuario

BrookVent

BrookVent AIRSTREAM XE+ Instrucciones de montaje

BrookVent

BrookVent BTP EC 100 Instrucciones de montaje

BrookVent

BrookVent AF 90-DMEV-100 Manual de usuario

BrookVent

BrookVent 90-0103-WDS-01 Instrucciones de montaje

BrookVent

BrookVent airstream DMEV 100 HT Instrucciones de montaje

BrookVent

BrookVent AIRVENT SM ACOUSTIC Instrucciones de funcionamiento

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje