Brodit 511258 Manual de usuario

Product 511258

511258 Passive holder with tilt swivel Adjustable Holder, Fits Devices with Skin.

Keep your Galaxy S II in a passive holder on the road and you will always have it within easy sight and reach.

Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's

interior. Your Galaxy S II is held securely in place in an upright position for maximum cellular reception. You can

connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just

as easy to take it with you when leaving the vehicle. The holder fits for Galaxy S II with skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection

on the screen. You can tilt the holder 22° in each direction. Also fits with Samsung 2000mAh thicker battery.

Attach onto ProClip Mounting Platform.

EAN: 7320285112582

Item no 511258 fits:

AT&T Samsung Galaxy S III (SGH-i747) (For USA)

Samsung Galaxy S II 4G i9100M (For all countries)

Samsung Galaxy S II i9100 (For all countries)

Samsung Galaxy S II i9100G (For all countries)

Samsung Galaxy S III (AT&T SGH-i747) (For USA)

Samsung Galaxy S III (Sprint SPH-L710) (For USA)

Samsung Galaxy S III (T-Mobile USA SGH-T999) (For USA)

Samsung Galaxy S III (Verizon SCH-i535) (For USA)

Samsung Galaxy S III i9300 (For Europe)

Samsung Galaxy S III i9305 (For all countries)

Sprint Samsung Galaxy S III (SPH-L710) (For USA)

T-Mobile Samsung Galaxy S III (SGH-T999) (For USA)

Verizon Samsung Galaxy S III (SCH-i535) (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder for your device: Loosen the screws on the back side of the holder, so the sides of the

holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in

place. Tighten the screws on the back side of the holder.

2. To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching

plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed

screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns

on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same

time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in

place, but still can be adjusted.

4. The holder is in place.

2(2)

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Brodit

Brodit

Brodit ProClip 854590 Manual de usuario

Brodit

Brodit ProClip 855176 Manual de usuario

Brodit

Brodit ProClip 855038 Manual de usuario

Brodit

Brodit 855136 ProClip Manual de usuario

Brodit

Brodit ProClip 852426 Manual de usuario

Brodit

Brodit 852599 ProClip Manual de usuario

Brodit

Brodit ProClip 855173 Manual de usuario

Brodit

Brodit 711027 Manual de usuario

Brodit

Brodit 855135 Manual de usuario

Brodit

Brodit 511484 Manual de usuario

Brodit

Brodit ProClip 854344 Manual de usuario

Brodit

Brodit ProClip 854684 Manual de usuario

Brodit

Brodit 213460 Manual de usuario

Brodit

Brodit ProClip 854208 Manual de usuario

Brodit

Brodit 854329 Manual de usuario

Brodit

Brodit ProClip 654877 Manual de usuario

Brodit

Brodit ProClip 854733 Manual de usuario

Brodit

Brodit 739003 Manual de usuario

Brodit

Brodit ProClip 853360 Manual de usuario

Brodit

Brodit 215547 Manual de usuario

Brodit

Brodit Vehicle Device Mount Manual de usuario

Brodit

Brodit ProClip 854457 Manual de usuario

Brodit

Brodit 712026 Manual de usuario

Brodit

Brodit Getac T800 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario