Broadcast Tools ACS 8.2 Plus Manual de usuario

Installation and Operation Manual

Firmware Version 1.6 or above

Manual update 06/09/2017

Broadcast Tools® ACS 8.2 Plus

Eight Input, Dual Output Stereo Matrix Audio Control Switcher

INC

ALL SPECIFICATIONS AND FEATURES FOR THIS PRODUCT ARE SUBJECT

TO CHANGE WITHOUT NOTICE

Due to the dynamic nature of product design, the information contained in this

document is subject to change without notice. Broadcast Tools, Inc., assumes no

responsibility for errors and/or omissions contained in this document. Revisions

of this information or new editions may be issued to incorporate such changes.

Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.

No part of this document may be reproduced or distributed without permission.

Visit www.broadcasttools.com for important product update information.

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

Table of Contents

Section Title Page #

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Who to Contact for Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Description/Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Function Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting Operation “Dip” Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power-Up Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting Inputs/Outputs/Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting Input and Output Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Calibrating VU meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Input Channel Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Serial Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting the Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Burst/Set-up Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connector Pin-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Output Port Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

“PIP” Connector Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Component Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix

CONTENTS

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

INTRODUCTION

Thank you for your purchase of a Broadcast Tools® ACS 8.2 PLUS EIGHT

INPUT, DUAL OUTPUT STEREO MATRIX AUDIO CONTROL SWITCHER

(referred to as the ACS 8.2 Plus throughout this manual). We’re confident that this

product will give you many years of dependable service. This manual is intended to

give you all the information needed to install and operate the Broadcast Tools®

ACS 8.2 Plus.

Broadcast Tools, Inc., is unable to support NON-Broadcast Tools hardware/software

or NON-Broadcast Tools computer hardware/software problems. If you experience

these problems, please research your hardware/software instruction manuals or

contact the manufacturer’s technical support department.

SAFETY INFORMATION

Only qualified personnel should install Broadcast Tools®products. Incorrect or

inappropriate use and/or installation could result in a hazardous condition.

WHO TO CONTACT FOR HELP

If you have any questions regarding your product or you need assistance, please con-

tact your distributor from whom you purchased this equipment.

If you would like more information about Broadcast Tools®products, you may reach

us at:

Broadcast Tools, Inc.

131 State Street

Sedro-Woolley, WA 98284 USA

Voice: 360 . 854 . 9559

Fax: 866 . 783 . 1742

Internet Home Page: www.broadcasttools.com

E-mail: [email protected]

THANK YOU FOR CHOOSING

BROADCAST TOOLS® BRAND PRODUCTS!

CAUTION!

Broadcast Tools®

Products, as with any

electronic device, can

fail without warning.

Do not use this product

in applications where a

life threatening condi-

tion could result due to

failure.

NOTE:

This manual should be

read thoroughly before

installation and opera-

tion.

WEBSITE:

Visit our web site for

product updates and

additional information.

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

PRODUCT DESCRIPTION

The Broadcast Tools® ACS 8.2 Plus provides matrix audio switching of 8 stereo

inputs to 2 stereo plus 2 mono outputs. Any input assigned to output one has fading

capabilities. Matrix switching allows any/or all inputs to be assigned to any/or all

outputs. The ACS 8.2 Plus may be controlled via front panel switches, contact clo-

sures, 5-volt TTL/CMOS logic and/or the multi-drop RS-232 serial port (control via

USB or Ethernet with optional devices). Installation is simplified with plug-in

euroblock screw terminals.

PRODUCT FEATURES

• True matrix switching, any or all inputs may be assigned to any or all outputs.

Any input assigned to output one may be faded up, down or dimmed from either

the front panel, contact closures, 5-volt TTL/CMOS logic or the multi-drop RS-

232 serial port.

• Stereo LED VU meters with front panel output selection switch.

• Stereo headphone amplifier with front panel output selection switch, headphone

jack and level control.

• Internal silence sensors monitor both output channels. Each is equipped with

front panel LED indicators; separate SPDT SS alarm relays, adjustable alarm

delay and restore duration.

• Front panel input selection switches are provided for each input channel with

separate output indicator LED’s

• Power-up selection of inputs to outputs, mute or last source selected.

• 16 input GPI port (PIP or Remote Control) with LED indicator.

• Eight open collector channel status outputs or programmable via burst com-

mands.

• Eight SPDT relay outputs with multiplex function on output two. Programmable

via burst commands.

• Optional AGC function on each output channel.

• Logic functions via microprocessor and non-volatile memory

• Most configuration options via rear panel dipswitches.

• Multi-turn input and output level controls.

• Electronically balanced stereo inputs.

• Electronically balanced stereo and monaural outputs.

• Multi-drop RS-232 serial port with data activity LED.

• Multiple units may be cascaded to expand inputs.

• 1-RU chassis.

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

FUNCTION DESCRIPTION

Front Panel:

The ACS 8.2 Plus is a 1-rack unit device (19”w x 1.75”h x 10”d). The front panel

supports fourteen selection switches, 25 LED indicators, headphone and LED VU

meter output selection switch, headphone jack and headphone level control.

Rear Panel:

Installation is simplified with euroblock pluggable screw terminals. The rear panel

host’s audio and control plug-in euroblock screw terminals, input/output trimmers,

multi-drop RS-232 modular connector and 5-pin DIN power supply connector.

Switches:

The front panel of the ACS 8.2 Plus contains selection pushbuttons for each input

channel. A mute switch is provided to turn off each audio channel. Fade up, down

and dim push buttons are provided for inputs assigned to output one. A push-push

switch is furnished for both VU meter and headphone monitoring selection. Input

channels may be programmed for the following operations:

• Overlap (default) - Overlap one audio source with another while the button for

the second source is held down. Both channels will be fed to the output until the

second button is released, at which time the first audio source will be switched

off.

• Mix – Multiple inputs at a time to any given output - Push once to connect input,

press again while holding down the mute switch.

• Interlock - Connecting one input to any output disconnects all other inputs from

that output.

LED Indicators:

The ACS 8.2 Plus’s front panel LED indicators provide operational display of the

following information:

• LED indicators for each input switch displaying which output channel the input

is assigned.

• The mute indicator LED is lit when all channels are off.

• Two 10 - LED VU meters are selectable between output channels.

• Two “SS” LED’s indicating when an output channel has drop below –37db.

• “PIP” Parallel Input Port (GPI) active, indicating any change with the 16 input

GPI ports.

• “Pwr/Ser” LED which indicates valid power and will flash when the serial RS-

232 port is receiving or transmitting serial data.

• Optional AGC LED’s. Each output AGC module will drive two LED’s indicat-

ing above/below the target level.

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

Controls:

• Headphone and VU meter monitor switch to select which output channel is

monitored.

• Headphone jack

• Headphone level control

• Input, Output, Fade, Dim, Mute and Program push buttons

Audio Inputs:

Each of the 8 stereo inputs are balanced bridging (20KΩ) at a nominal line level of

+4dBu. Multi-turn level controls are provided for each channel.

Audio Outputs:

The ACS 8.2 Plus provides two selectable balanced stereo outputs. Two balanced

monaural outputs are also provided which follow their respective stereo outputs.

The stereo outputs are adjustable.

Stereo 10 – LED VU Meters:

The ACS 8.2 Plus contains LED VU meters selectable between the two output

channels.

Silence Sensors:

Each output channel has a detector that monitors the sum of each stereo channel.

The factory default delay is set at 10 seconds, with a threshold of -37 dB, while the

restore time is set at 10 seconds. Upon silence delay detection, the “SS-1 or SS-2”

SPDT relays close for the duration of the silence and the corresponding (SS-1 or SS-

2) LED is lit for duration of silence. Serial data is sent on either the loss or restora-

tion of audio. The sensor may be programmed for:

• Number of seconds of silence that must be present before an alarm state is

reached.

• Number of seconds that valid audio must be present before an alarm state is

cleared (Restore).

Remote Control (GPI) Inputs:

Most front panel functions may be controlled with the 5-volt TTL/CMOS logic com-

patible, contact closure inputs.

PIP (GPI) Inputs:

The Parallel Input Port provides 16 parallel 5-volt TTL/CMOS logic compatible GPI

inputs. The inputs are pulled high to 5 volts through a 20KΩresistor and are acti-

vated by pulling the input to ground. These inputs supply status to any serial polling

device (when the unit ID is set to 0, no polling of inputs is required).

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

“Open Collector” Status Outputs, 8 Port Output Control

The ACS 8.2 Plus provides eight open collector status outputs. The status outputs

may be configured to operate in one of three modes:

• The status output follows the associated channel (multiplex applications).

• The status outputs a one-second pulse when the associated channel is selected.

• Software Control.

Relay Outputs, 8 Port Output Control:

The ACS 8.2 Plus contains 8 - SPDT relays. Each relay may be latched on, latched

off or momentarily turned on by a non-dedicated computer. The “pulse” time may

be set from 100msec to 9.9 seconds. The default pulse length is one-second.

8 SPDT relay outputs may be controlled by software. Each relay may be com-

manded to:

Multiplex “MPX” NON-software control. SW17-9 must be ON. Each relay fol-

lows the associated input channel selected to output two only.

WEBSITE:

Visit our web site for

product updates and

additional information.

Latch On Turns on and stays on (through power

failures) until turned off.

Latch Off Turns off and stays off (through power

failures) until turned on.

Momentary On Overrides latch; turns on for (default)

second, then latches off.

FUNCTION DESCRIPTION

* When assigned to output one only.

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

Front Panel Switches:

Switch(es) Function

8, 1 for each input Input Channel 1 - 8.

Mute when used w/ an input switch

Mute either or both outputs.

OP 2 Used to select any of the

inputs to output two.

Dim * Dim audio on the selected

input to a pre-programmed

amount.

Fade Up * Fade up the selected input

audio channel 1 to a pre-

programmed time.

Fade Down * Fade down the selected input

audio channel to a pre-

programmed time.

Hidden “PGM” switch To program the configurations

ACS 8.2 Plus Front Panel switch operation

Action Result

Push any channel button. Channel is connected to output 1. To mute the

active channel, simultaneously hold down the

mute switch while pressing the input push button.

Press and hold the output 2

push button while selecting

any input button.

The input channel is connected to output 2.

To mute the active channel, simultaneously hold

down the output 2 and mute switch while

pressing the input push button.

Push any input channel while

holding down the “Fade up”

button.

The selected input will be faded up at the

selected rate on output 1 only.

Push any input channel while

holding down the “Fade

down” button.

The selected input will be faded down at the

selected rate on output 1 only.

Push any input channel while

holding down the “Dim” button. The selected input will be dimmed to the

selected level on output 1 only.

FUNCTION DESCRIPTION

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

DESCRIPTION

INSTALLATION GUIDLINES

Inspection:

Please examine your ACS 8.2 Plus carefully for any damage that may have been sus-

tained during shipping. If any is noted, please notify the shipper immediately.

Retain the packaging for inspection by the shipper. The package contains the ACS

8.2 Plus, power transformer, installation manual and a reversed modular serial cable

with a (S9) 9-pin D-Sub adapter.

User Programming:

The ACS 8.2 Plus programming is stored in non-volatile memory. Configurations

are set with selection dipswitches and menu or burst commands.

Setting Operation “DIP” Switches:

The ACS 8.2 Plus is equipped with a 10-position “PGM” (SW17) dipswitch. The

dipswitch specifies audio modes (mix, interlock, overlap), 2 bit unit ID, baud rate

and other features listed below. Access to this switch is near the front panel. Follow

the description below.

Front Panel LED’s (Left to Right):

Front Panel LED’s Number

Of LED’s

Activation Event/Mode Activation

Behavior

Inputs connected to

“OUTPUT 1” 8 Green State of Connection On if connected

to Output 1

Inputs connected to

“OUTPUT 2” 8 Red State of Connection On if connected

to Output 2

“Mute” 1 Red System Mute Status On when both output

channels are off.

Optional AGC

Output 1 1 Green

1 Red AGC Action Red if above, green

if below target level

Optional AGC

Output 2 1 Green

1 Red AGC Action Red if above, green

if below target level

“SS-1”, Silence Alarm

for output 1 1 Red Duration of Silence On if alarmed

“SS-2”, Silence Alarm for

output 2 1 Red Duration of Silence On if alarmed

“PIP” Pulse Active 1 Yellow Any valid GPI input

when enabled Flickers when a PIP

is detected

“Pwr/Ser” Status 1 Green Valid Power and/or serial

data. On w/ valid power &

flickers w/ serial data.

INSTALLATION GUIDELINES

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Broadcast Tools®ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher

INSTALLATION

DIP (SW-17) “PGM” Switch Functions

Switch

Number Default

Setting Function

1 OFF Add 1 to Address (Default ID = 0 to access menu)

2 OFF Add2toAddress

3 OFF Baud rate (Default = 9600)

4 OFF Baud rate

5 OFF Stereo Audio Switching (Default = Overlap)

6 OFF Stereo Audio Switching

7 OFF Power up modes (Default = Save selection via “PGM” button)

8 OFF Open collectors in remote mode. (Default: Follow)

9 OFF Output 2 “MPX” mode

10 OFF Remote Control (Default) / PIP/GPI

Address (ID) DIP Switches

SW17-1 SW17-2 Mode

OFF OFF ID = 0

ON OFF ID = 1

OFF ON ID = 2

ON ON ID = 3

Baud Rate DIP Switches

SW17-3 SW17-4 Mode

OFF OFF 9600

ON OFF 2400

OFF ON 19200

ON ON 38400

Audio Switch Mode DIP Switches

SW17-5 SW17-6 Mode

OFF OFF Overlap

ON OFF Interlock

OFF ON Interlock

ON ON Mix

Tabla de contenidos

Otros manuales de Cambiar de Broadcast Tools

Broadcast Tools

Broadcast Tools Universal 4.1 MLR/Serial Manual de usuario

Broadcast Tools

Broadcast Tools Audio Sentinel 4 Web Manual de usuario

Broadcast Tools

Broadcast Tools 38511 Manual de usuario

Broadcast Tools

Broadcast Tools ROS-16 Manual de usuario

Broadcast Tools

Broadcast Tools SS 2.1 BNC Manual de usuario

Broadcast Tools

Broadcast Tools AES Switcher Sentinel 2+1 Manual de usuario

Broadcast Tools

Broadcast Tools Sentinel 3 Manual de usuario

Broadcast Tools

Broadcast Tools 8 x 2A Manual de usuario

Broadcast Tools

Broadcast Tools RM-3 Manual de usuario

Broadcast Tools

Broadcast Tools SS 2.1 MLR/TERM Manual de usuario

Broadcast Tools

Broadcast Tools ROS Manual de usuario

Broadcast Tools

Broadcast Tools SS 4.1 III Manual de usuario

Broadcast Tools

Broadcast Tools SS 4.1 Plus Manual de usuario

Broadcast Tools

Broadcast Tools DAS 8.4 Plus Manual de usuario

Broadcast Tools

Broadcast Tools SS 16.16 Manual de usuario

Broadcast Tools

Broadcast Tools SS 8.1 MLR Manual de usuario

Broadcast Tools

Broadcast Tools DMS-III Manual de usuario

Broadcast Tools

Broadcast Tools SS 2.1 MLR/RJ Manual de usuario

Broadcast Tools

Broadcast Tools SS 8.1 II Manual de usuario

Broadcast Tools

Broadcast Tools Universal 4.1 MLR Manual de usuario

Broadcast Tools

Broadcast Tools AES Switcher Sentinel 4 XLR Manual de usuario

Broadcast Tools

Broadcast Tools AES Switcher Sentinel 4 Manual de usuario

Broadcast Tools

Broadcast Tools SS 16.2 Manual de usuario

Broadcast Tools

Broadcast Tools SS 8.1 MLR Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario