Brizo BELO 63052 Manual de usuario

PULL-DOWN KITCHEN

AND BAR / PREP FAUCETS

Write purchased model number here.

Models

63052, 63352 &

63952 Series

BELO

ASME A112.18.1 / CSA B125.1

54303 Rev. B

For easy installation of your Brizo®

faucet you will need:

• To READ ALL the instructions

completely before beginning.

• To READ ALL warnings, care, and

maintenance information.

You may need the following tools:

WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE DISHWASHERS!

1/15/10

1/8"

All parts and finishes of the Brizo®faucet are

warranted to the original consumer purchaser to

be free from defects in material & workmanship

for as long as the original consumer purchaser

owns their home. Delta Faucet Company

recommends using a professional plumber for

all installation & repair.

Delta will replace, FREE OF CHARGE,

during the warranty period, any part or finish

that proves defective in material and/or

workmanship under normal installation, use

and service. Replacement parts may be

obtained by calling 1-877-345-BRIZO (2749)

(in the U.S. and Canada) or by writing to:

In the United States:

Delta Faucet Company

Product Service

55 E. 111th Street

Indianapolis, IN 46280

In Canada:

Masco Canada Limited, Plumbing Group

Technical Service Centre

420 Burbrook Place

London, ON N6A 4L6

This warranty is extensive in that it covers

replacement of all defective parts and even finish,

but these are the only two things that are

covered. LABOR CHARGES AND/OR DAMAGE

INCURRED IN INSTALLATION, REPAIR, OR

Lifetime Faucet and Finish Limited Warranty

REPLACEMENT AS WELL AS ANY OTHER

KIND OF LOSS OR DAMAGES ARE

EXCLUDED. Proof of purchase (original sales

receipt) from the original consumer purchaser

must be made available to Delta for all warranty

claims. THIS IS THE EXCLUSIVE WARRANTY

BY DELTA FAUCET COMPANY, WHICH DOES

NOT MAKE ANY OTHER WARRANTY OF ANY

KIND, INCLUDING THE IMPLIED WARRANTY

OF MERCHANTABILITY.

This warranty excludes all industrial, commercial

& business usage, whose purchasers are hereby

extended a five year limited warranty from the

date of purchase, with all other terms of this

warranty applying except the duration of the

warranty. This warranty is applicable to Brizo®

faucets manufactured after January 1, 1995.

Some states/provinces do not allow the exclusion

or limitation of incidental or consequential

damages, so the above limitation or exclusion

may not apply to you. Any damage to this faucet

as a result of misuse, abuse, or neglect, or any

use of other than genuine Delta®replacement

parts WILL VOID THE WARRANTY.

This warranty gives you specific legal rights, and

you may also have other rights which vary from

state/province to state/province. It applies only for

Brizo®faucets installed in the United States of

America, Canada, and Mexico.

TABLE OF CONTENTS:

Warranty ------------------------------------------------------------- Page 2

Installation Instructions ----------------------------------------------- Pages 3-15

Plastic Sleeve Installation --------------------------------------------- Page 11

Setting The Handle Limit Stop ----------------------------------------- Page 16

Maintenance -------------------------------------------------------- Page 17

Replacement Parts -------------------------------------------------- Pages 18&19

A. C.

A. Thread hose (1) into spray wand (2). C. Insert hose (1) into and through spout

sub-assembly (2).

Hose Installation

B. To allow for easier assembly, bend

hose near wand as shown.

Bend

A. Verify friction washer (1), spout clip (2) and spout ring (3) are present on

spout assembly.

Spout Assembly

B. C.

B. Insert hose (1) through guide in hub

and out through mounting shank (2). C. Align button (1) on spout clip with hole

in hub (2), then insert spout into hub.

Use back-and-forth motion to insert

spout assembly into hub until clip

button slips into hole. Rotate spout

assembly to ensure smooth

operation. USE CAUTION NOT TO

PINCH FINGERS.

Spout Assembly (Continuation)

A. B.

A. Remove adhesive backing on trim

ring gasket (1) and press into place

on trim ring (2). Place trim ring on

bottom of spout hub. Insert supply

tubes through mounting hole in sink.

Your faucet is designed for a hole

diameter of 1 3/8" +/- 1/4" (35 mm

+/- 6 mm) and a deck thickness of

up to 3" (76 mm). Maximum deck

thickness of soap dispenser is

3" (76 mm).

B. Push hose (1) partially up into mounting

shank (2). Install the mounting bracket

(3) and nut (4) onto the mounting shank

using wrench (5). For decks up to 1 3/8"

(35 mm) thick use spacer (6) provided

between nut and mounting bracket.

Note 1:The wrench provided is

designed to be used with a variety of

tools: flat/Phillips head screwdrivers,

wrenches, etc. Note 2: For thin gauge

sinks (not recommended), use the

thin deck aid (7) RP49588 as shown

for single and 3 hole installations

to help support the deck. HINT: Turn

the spout tube opposite the handle to

balance the assembly when mounting.

Faucet Installation - Center Mount

Optional

For optional installations using the 10"

escutcheon, order RP49588 (specify finish)

not supplied. Replace the trim ring with the

10" escutcheon (1) and gasket (2). Push

hose (3) partially up into mounting shank.

Mount as shown above using the

two 1/4-20 studs (4), nuts and washers

(5), bracket (6) with nut and wrench (7).

The wrench provided is designed to

be used with a variety of tools:

flat/Phillips head screwdrivers,

wrenches, etc.

Optional Escutcheon Installation

Carefully spread apart the supply tubes

(1) to allow hookups and clearance

for bag bracket (2) when installed.

WARNING: Kinked tubes will void the

warranty. Attach bag bracket as shown.

Tighten thumbscrew and nut (3) to secure.

Screw and nut can go either direction.

Note: Squeeze bracket opening

together as shown to aid the bracket in

fitting onto the shank.

Bag Bracket Installation

A. B.

A. Ensure all fittings and end connections

are free of debris. Faucet fittings (1)

are 3/8" compression, with ends

colored red for hot and blue for cold.

Loop tubing (2) if it is too long. Note:

Recommended tubing minimum

bend diameter is 8". Secure metal

nut (3) on faucet tube to supply valve

connection (4) and hand tighten, then

tighten one additional turn with wrench.

DO NOT OVERTIGHTEN. Repeat

for other tube. WARNING: Do not

use pipe dope or other sealants on

water line connections.

B. Place bucket under faucet quick

connect fitting (1), open both supply

valves (2) and turn faucet valve on by

operating handle (3) for one minute.

Important: This flushes away any

debris that could cause damage

to internal components. When

complete, close both supply valves

and turn faucet valve off to shut off

water flow.

Water Line Connections

Custom Fit Connections

NOTICE: If you determine the PEX supply

tubing for this faucet is too long and must

be shorter to create an acceptable

installation, be sure to read the instruc-

tions and plan ahead.When cutting the

supply tubing the installer accepts the

responsibility to do so in a way that allows

a leak-free joint to be created. Delta is not

responsible for tubing that is cut too short

or cut in a way that will not allow for a

leak-free joint.

For custom fit installations, you must use

RP50952 sleeves supplied with model and

nuts included on supply lines. Tube cut must

be straight. See plastic sleeve installation

instructions found in RP50952 and included in

this document (page 11) for more information.

Secure metal nut (1) on faucet tube to supply

valve connection (2) and hand tighten, then

tighten an additional 2 turns with wrench. DO

NOT OVERTIGHTEN. Repeat for other tube.

WARNING: Do not use pipe dope or other

sealants on water line connections.

Place bucket under faucet quick connect

fitting (1), open both supply valves (2) and

turn faucet valve on by operating handle (3)

for one minute. Important:This flushes

away any debris that could cause

damage to internal components. When

complete, close both supply valves and turn

faucet valve off to shut off water flow.

Potential Problems and Remedies

lTubing is not cut perpendicular to the

axis of the tub: carefully make an

additional cut, being careful not to cut the

tube too short.

lTubing is cut too short: buy a coupling

union and a replacement supply line that

mate together from a store. The coupling

union end intended to connect to the

faucet must mate to the standard 3/8"

connection nuts and plastic sleeves

supplied with the faucet.

lThe plastic sleeve or connection nut is

lost: purchase a replacement nut and/or

plastic sleeve that are designed to seal

with PEX tubing. NOTICE: DO NOT use a

metal sleeve, RP51243 gasket (supplied

with faucet) or ferrule in the place of the

plastic sleeve supplied, it may not

create a leak-free joint.

A. B.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Accesorios de cocina y baño de Brizo

Brizo

Brizo TempAssure MultiChoice 75 Series Manual de usuario

Brizo

Brizo VESI 65340LF-ECO Manual de usuario

Brizo

Brizo Rook 65361LF LHP-ECO Series Manual de usuario

Brizo

Brizo FLORIANO 63500 Manual de usuario

Brizo

Brizo BELO 63952LF Manual de usuario

Brizo

Brizo COLTELLO 64096LF Series Manual de usuario

Brizo

Brizo Litze T67335-GLLHP Manual de usuario

Brizo

Brizo Levior 65397LF- LHP-ECO Series Manual de usuario

Brizo

Brizo ARTESSO 63225LF-SS Manual de usuario

Brizo

Brizo ARTESSO 64125LF Manual de usuario

Brizo

Brizo Tresa 62036LF Manual de usuario

Brizo

Brizo Tresa 62936LF Series Manual de usuario

Brizo

Brizo RP37762 Manual de usuario

Brizo

Brizo Charlotte T60085 Guía de inicio rápido

Brizo

Brizo Litze 64043LF Series Manual de usuario

Brizo

Brizo Vuelo 61055LF Manual de usuario

Brizo

Brizo Sotria 65050LF-PC Manual de usuario

Brizo

Brizo RSVP Series Manual de usuario

Brizo

Brizo Tresa 61036LF Manual de usuario

Brizo

Brizo 65336LF Manual de usuario

Brizo

Brizo Vuelo Series Manual de usuario

Brizo

Brizo Charlotte 65885LF- LHP-ECO Series Manual de usuario

Brizo

Brizo Rook 88761 Series Manual de usuario

Brizo

Brizo Rook 61074LF Series Manual de usuario

Manuales populares de Accesorios de cocina y baño de otras marcas

Grohe

Grohe BRIDGEFORD 33 870 Manual de usuario

Hans Grohe

Hans Grohe Zenio Metro 31811000 Manual de usuario

Gröne

Gröne Zedra 32 555 Manual de usuario

Transform

Transform QL045 Manual de usuario

Sanela

Sanela SLU 09PTB Manual de usuario

Glacier bay

Glacier bay FP4A0052BNV Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks C1-1400 Instrucciones de montaje

Grohe

Grohe Rapido E Manual de usuario

Danze

Danze D302455 Manual de usuario

Waterworks

Waterworks CEKM30 Hoja de instrucciones

Helvex

Helvex Omega TV-298 Manual de usuario

Tribata.

Tribata. GEORGIAN G5393 Manual de usuario

Alpha Bidet

Alpha Bidet Alpha One Manual de usuario

InSinkErator

InSinkErator H/HC3300 Manual de instalación

Clou

Clou Xo type 1 Manual de usuario

Kohler

Kohler Contra 26448T-4 Manual de usuario

Grohe

Grohe Bridgeford 20 158 Manual de usuario

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Manual de usuario