Briteq LD-POWER240 Manual de usuario

LD-POWER240

User Manual

Please read the instructions carefully before use

LD-POWER240

BRITEQ 1A

TABLE OF CONTENTS

1. Safety Instruction

2. Features

3. Technical Specification

4. Installing Instructions

5. Main Function

6. Overview

6.1 Front View

6.2 Rear View

7. DMX Controller

8. DMX512 Configuration

9. DMX512 Connection

9.1 XLR Connection

9.2 RJ45 Connection

LD-POWER240

BRITEQ 2A

1. Safety Introductions

Please read the User Manual carefully as it includes important information regarding

details of operation, maintenance and technical data. Keep this manual with unit for

future consultation.

WARNING！

● Avoiding any flammable liquids, water or metal objects enter into the unit.

● If any liquid spill on the unit, disconnect the power supply immediately.

● When serious operation problem happen, stop using the unit immediately and

contact your local dealer for service.

● Do not open the unit because there are no user serviceable parts inside.

● Never try to repair the unit yourself. Repairs by unqualified people may cause

damage or faulty operation. Please contact your nearest dealer for any service.

CAUTION！

● After removed the package, make sure the unit is not damaged in any way. Don’t

use it with doubt and contact an authorized dealer.

● Never use the unit under the excessive humidity and a temperature over 40℃.

● Do not try to dismantle or modify the unit.

2. Features

 7 Channel modes (Mode 1 & Mode 2 for RGBW; Mode 3 &Mode 4 for RGB;

Mode 5 &Mode 6 for CW and WW colors; Mode 7 for single color) enables V

Power to control passive lighting fixtures that fitted with different LED emitters.

 Comes with 3 chase groups, each group has 8 chases (3 editable chases); and

each chase can have up to 42 scenes. For editing the chases, Visio has

developed a software (option) that enables you to edit the chases easily.

LD-POWER240

BRITEQ 3A

 It comes with the built-in clock for editing your shows. You can edit max. 30

shows (choose from the chases) in one week, and different time period per day.

 User can run the chase manually step by step by pressing the manual button.

 Excellent fade effect, and auto running function.

 LCD display for easy navigation.

3. Technical Specifications

 DMX Input

Control: DMX 512

DMX connection: RJ45 or 3 pin XLR

 DMX Output

Max. Power Output: 240W

Output Voltage: DC 48V

Max. Output Current: 350mA per color

Max. Load per zone: RGB & RGBW mode-Each color 12 LEDs max.

White mode(warm white & cool white)-Each white 24 LEDs max.

Single mode - Total LED 48 max.

 Input Voltage: 100V-240V~50-60Hz

 Fuse: T 3.15A

 Dimension: 280×309×90 mm

 Weight: 4kgs

LD-POWER240

BRITEQ 4A

4. Installing instructions

The LD-POWER240 should be placed on a non-flammable flat surface in any

orientation and fixed by screws. There are mounting holes on the housing. Ensure

that installation place is enough ventilated.

The LD-POWER240 power output is 240 watt (4×60W ).

LD-POWER240

BRITEQ 5A

5. Main Function

To select any function, press MENU button until the required one is shown on

the display. Select the function by ENTER button and the display will blink. Use

DOWN and UP button to change the mode. Once the required mode has been

selected, press ENTER button to setup. Back to the functions without any change

press MENU button.

Press MENU button for 3 seconds to exit the functions, press “Chase Group 1”,

“Chase Group 2” or “Chase Group 3” button to run the built-in chase or you have

programmed. Enter chase group, the LED on, then press the chase group button

again to choose the chase. Once the chase has been selected, press “Manual”

button into manual mode, the LED on, you can choose the step one by one; press

“Fade” button into fade mode, the LED on, the unit will run all steps of the chase

automatically, at this time, you can press UP/DOWN button to adjust the fade time;

press the “Auto” button into auto mode, the LED on, the unit will also run all steps

automatically, and you can press UP/DOWN button to adjust the wait time; press the

“Blackout” button, the LED on and the unit into blackout mode.

LD-POWER240

BRITEQ 6A

The main functions are shown below:

LD-POWER240

BRITEQ 7A

Address

Press the MENU button up to when the Address is shown on the display. Pressing

ENTER button and 1 will blink. Use DOWN and UP button to change the DMX 512

address (1-512). Once the address has been selected, press ENTER button to setup

(or automatically return to the main functions without any change after idling one

minute). Back to the previous function without any change, press MENU button.

Channel Mode

Press the MENU button up to when the Channel Mode is shown on the display.

Pressing ENTER button and 19/43 Channel will blink. Use DOWN and UP button to

select 19/43 channel or 16/40 Channel …… or 4/10 Channel mode. Once the

mode has been selected, press ENTER button to setup. Back to the previous

function without any change, please press the MENU button.

Adjust Time

Press the MENU button up to when the Adjust Time is showing on the display.

Press ENTER button and Friday will blink. Use DOWN and UP button to select

Monday or Tues …… or Sunday. Press the ENTER button to setup hour and 14

will blink, use DOWN and UP button to select hour, press the ENTER button to setup

minute and 58 will blink, use DOWN and UP button to select minute, press MENU to

store and back to the main functions.

Edit Show

Press the MENU button up to when the Edit Show is showing on the display. Press

ENTER button and 01 will blink. Use UP/DOWN button to select show (1-30), press

ENTER button to setup and use UP/DOWN to edit Time (for example: set the unit on

F (from) Monday15:15 T (to) Monday 15:20) and Chase (choose Group 1-3, Num

1-8 and edit F-fade time and W-wait time), Press MENU button to store and back to

the main functions.

LD-POWER240

BRITEQ 8A

Edit Chase (only chase number 6~8 are editable)

Press the MENU button up to when the Edit Chase is showing on the display. Press

ENTER button and 1 will blink, use UP/DOWN button to choose group 1, 2 or 3,

press ENTER button to setup and use UP/DOWN to set Num-number (06-08),

Leng-length (01-42, the steps, you choose from the total amount of steps, you want

to run, for example, if the total amount of steps you set is 42, you can choose only

first 1-10 steps to run) and Value (to set step, P-A (output all) or 1-4/10, C-Color,

W-White, D-Dimmer), press ENTER button to setup. Back to the previous function

without any change please press the MENU button.

Manual Test

Press the MENU button up to when the Manual Test is showing on the display.

Press ENTER button and 1 will blink, use UP/DOWN button to choose P-A (output

all) or 1-4/10, press ENTER button to store, use UP/DOWN to set D-Dimmer,

S-Strobe, R-Red, G-Green, B-Blue, W-White, press ENTER button to setup. Back

to the previous function without any change please press the MENU button.

White Balance

Press the MENU button up to when the White Balance is showing on the display.

Press ENTER button and 1 will blink, use DOWN/UP button to choose P-output all

or 1-4/10, press ENTER button to store, use DOWN/UP to set R-Red, G-Green,

B-Blue, press ENTER button to setup. Back to the main functions without any

change please press the MENU button.

Remark: setting is limited to values between 125 and 255

Auto Test

Press the MENU button up to when the Auto Test is showing on the display. Press

ENTER button Testing will blink on the display and the unit will run self-test by built-in

program. To go back to the previous function please press the MENU button.

LD-POWER240

BRITEQ 9A

LCD Backlight

Press the MENU button up to when the LCD Backlight is showing on the display.

Press ENTER button to choose Always On or Auto Blackout. To go back to the

previous function please press the MENU button.

Fixture Use Time

Press the MENU button up to Fixture Use Time, it will show the number of working

hours of the unit. To go back to the previous function please press the MENU button.

Software Version

Press the MENU button up to Software Version, It will show the version of software

of the unit. To go back to the previous function please press the MENU button.

6. Overview

6.1 Front View

LED

1. DMX On DMX Input

2. MASTER On Master Mode

3. SLAVE On Slave Mode

4. POWER On Power on

LD-POWER240

BRITEQ 10A

5. Menu Press the button to select the programming functions.

6. Up Press the button to go forward for the desired functions.

7. Enter Press the button to confirm the selected functions.

8. Down Press the button to go backward for the desired functions.

9. Display To show the various menu and selected function

10.Chase Group 1 Press the button to run chase group 1, the LED will be on.

11.Chase Group 2 Press the button to run chase group 2, the LED will be on.

12.Chase Group 3 Press the button to run chase group 3, the LED will be on.

13.Manual Press the button into manual mode, the LED will be on.

14.Fade Press the button into fade mode, the LED will be on.

15.Auto Press the button into auto mode, the LED will be on.

16.Blackout Press the button to blackout the unit, the LED will be on.

6.2 Rear View

1. FUSE For protecting the unit when the transient current is too big.

2. POWER Power cable for AC input.

3. DMX OUT DMX Output 3 pin XLR socket

4. DMX IN DMX Input 3 pin XLR socket

5. LED DC power & signal output for linking LED fixtures.

LD-POWER240

BRITEQ 11A

7. DMX Controller

Using universal DMX controller to control the units, you have to set DMX address

from 1 to 512 channel so that the units can receive DMX signal.

Press the MENU button up to when the Address is showing on the display. Pressing

ENTER button and the display will blink. Use DOWN and UP button to change the

DMX512 address. Once the address has been selected, press ENTER button to

setup (or automatically return to the main functions without any change after idling

one minute). Back to the previous function without any change, press MENU button.

Please refer to the following diagram to address your DMX512 channel for the first 4

units.

20 Channels:

19 Channels:

16 Channels:

12 Channels:

8 Channels:

5 Channels:

4 Channels:

LD-POWER240

BRITEQ 12A

8. DMX512 Configuration

19 Channels:

16 Channels

12 Channels:

LD-POWER240

BRITEQ 13A

4 Channels: 8 Channels:

5 Channels: 4 Channels

LD-POWER240

BRITEQ 14A

9. DMX512 Connection

9.1 XLR Connection

1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin

adapter-cable.

2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120

ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug

and plug it in the DMX-output of the last unit.

3. Connect the unit together in a `daisy chain` by XLR plug from the output of the

unit to the input of the next unit. The cable can not branched or split to a `Y`

cable. DMX 512 is a very high-speed signal. Inadequate or damaged cables,

soldered joints or corroded connectors can easily distort the signal and shut

down the system.

4. The DMX output and input connectors are pass-through to maintain the DMX

circuit, when one of the units’ power is disconnected.

5. Each unit needs to have an address set to receive the data sent by the controller.

The address number is between 0-511 (usually 0 & 1 are equal to 1).

6. The end of the DMX 512 system should be terminated to reduce signal errors.

LD-POWER240

BRITEQ 15A

7. 3 pin XLR connectors are more popular than 5 pin XLR.

3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)

5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)

Pin 4/Pin 5: not used.

9.2 RJ45 Connection

LED module Input

RJ45 Connector

Front view of the Connector

Pin 1: Red LED + Pin 5: Red LED -

Pin 2: Green LED +

Pin 6: Green LED -

Pin 3: Blue LED + Pin 7: Blue LED -

Pin 4: White LED + Pin 8: White LED -

Tabla de contenidos

Otros manuales de Equipo de iluminación de Briteq

Briteq

Briteq BT-THEATRE 400TW Manual de usuario

Briteq

Briteq STAGE COLOR 48 Manual de usuario

Briteq

Briteq MICRO BEAMER RGBW Manual de usuario

Briteq

Briteq BT-THEATRE 100EC Manual de usuario

Briteq

Briteq Stage Beamer RGB MK2 Manual de usuario

Briteq

Briteq STAGE PAINTER 12 Manual de usuario

Briteq

Briteq POWERMATRIX5x5-RGB Manual de usuario

Briteq

Briteq BT-W07L12 Wash Manual de usuario

Briteq

Briteq BT-THEATRE 150EZ Manual de usuario

Briteq

Briteq STAGE BEAMER RGB - V1.0 Manual de usuario

Briteq

Briteq LED BLINDER WHITE - V1.0 Manual de usuario

Briteq

Briteq BT-60ls Manual de usuario

Briteq

Briteq BT-36II Manual de usuario

Briteq

Briteq BTX 5R BEAM Manual de usuario

Briteq

Briteq BT-BEAM70 Manual de usuario

Briteq

Briteq BTX-700BEAM Manual de usuario

Briteq

Briteq BT-VENUELITE 4 Manual de usuario

Briteq

Briteq MIINI COLOR 7 TC - V1.1 Manual de usuario

Briteq

Briteq Club Laser 7 Manual de usuario

Briteq

Briteq BT-36LI Manual de usuario

Briteq

Briteq BT-150LS Manual de usuario

Briteq

Briteq BT-THEATRE 20WW Manual de usuario

Briteq

Briteq BT-54L3 Manual de usuario

Briteq

Briteq LED EXPO BEAM Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario