Bristan Bright BRG BAS C Manual de usuario
Please keep this booklet for future
reference.
Installer, when you have read these
instructions please ensure you leave them
with the user.
Installation Instructions
Bright Tap Range
Models covered:
BRG BAS C, BRG BF C,
BRG BSM C, BRG 1HBF C
2
Contents
Thank you for choosing Bristan, the UK’s leading taps and showers expert.
We have designed this product with your enjoyment in mind. To ensure that it works
to its full potential, it needs to be tted correctly. These tting instructions have been
created to give you all of the information you need and, if you need any further help,
please do not hesitate to contact us.
Important Safety Information....................................................................3
General Information......................................................................................4
Specications...................................................................................................5
Dimensions.......................................................................................................6-7
Installation Requirements...........................................................................8
Installation ........................................................................................................9-10
Basin Mixer & 1 Hole Bath Filler.................................................................9
Bath Filler & Bath Shower Mixer................................................................10
Maintenance ....................................................................................................11
Troubleshooting .............................................................................................12
Guarantee .........................................................................................................13
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
3
Important Safety Information
•Please read these instructions thoroughly and retain for future use.
•All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly and receive regular maintenance in accordance with these
instructions.
•If you are in any doubt about your ability to install this product safely you must
employ the services of an experienced qualied plumber.
•This tting needs to be installed in accordance with, and meet the requirements of the
Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
•Remove all packaging and check the tting for damage before starting installation.
•Warning: Before starting any installation please consider the following: before
drilling into walls, check that there are no hidden electrical wires, cables or water
supply pipes. This can be checked with the aid of an electronic detector.
•If power tools are used do not forget to: - Wear eye protection
- Unplug equipment after use
•Important: Remember to turn o the mains water supply before connecting to any
existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease
of maintenance.
•Warning: Before installing the new tting it is essential that you thoroughly ush
through the pipework in order to remove any remaining swarf, solder, etc.
Failure to carry out this procedure could cause problems or damage to the workings of
the tting.
•Take care when handling the ‘exible connecting pipes’, do not bend, twist or crush
them. Only tighten the pipes by hand.
•Do not crush or kink the shower hose, this could damage the hose and cause leaks.
• This product must not be modied in any way as this will invalidate the guarantee.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
4
General Information
This product has been tested to the Water Regulations Advisory Scheme (WRAS) and
satises the requirements of the Water Supply (Water Fittings) Regulations 1999 and
current bylaws. For full Installation Requirements & Notes (IRN) please visit
www.wras.co.uk/directory.
Designed to comply with BS EN 200 for combination taps to be used within systems
designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65°C.
A stored water temperature of 60°C is considered sucient to meet all normal
requirements and will minimise the build up of lime scale in hard water areas.
If the product is installed at low pressure (tank fed), then the minimum distance from
the highest installed position of the outlet to the underside of the cold tank should be at
least 3 metres to ensure adequate performance.
These taps and mixers should be installed in compliance with the Water Regulations.
Where the supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the
mains, approved check valves must be tted in the supply pipes.
For further details contact your Local Water Authority.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
5
Specications
Product Code
Working pressure
Inlet
Min Max
BRG BAS C 0.3 5.0 M10 15mm Compression Flexible Tails
BRG BF C 0.3 5.0 3/4" BSP Threaded Tail
BRG BSM C 0.3 5.0 3/4" BSP Threaded Tail
BRG 1HBF C 0.3 5.0 M16 15mm Compression Flexible Tails
Maximum static pressure- 10.0 bar
System Requirements:
Gravity fed hot & cold (Equal pressures)
Gravity fed hot & cold (Dierential pressure, maximum ratio 5:1)
Unvented systems
Instantaneous water heater (Combination boiler)
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
6
Dimensions
Dimensions are approximate and in millimetres.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
Basin Mixer
1 Hole Bath Filler
Basin Mixer
100
115
342
137 135
121
107
342
130 132
7
Dimensions Cont.
Bath Filler
Dimensions are approximate and in millimetres.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
Bath Shower MixerBath Shower Mixer
180
105
50
110
51
1
80
100
50
110
5
4
8
Installation Requirements
Flexible Connecting Pipes
Care must be taken when connecting the exible connection pipes to the household pipework to
ensure they do not bend sharply and kink or twist.
See below for recommended ways to t the exible connecting pipes.
Slight
bend
90°
Angle
Kink Curved
round
Twists
Important: Failure to follow these guidelines may result in poor performance and damage
to the exible connecting pipes.
Important: Full access must be made available on installation for future maintenance/
servicing purposes.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
9
Installation
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
Basin Mixer / 1 Hole Bath Filler
1. Screw the exi tails into the bottom of
the body by hand only (DO NOT
OVERTIGHTEN).
2. Feed the exi tails through the hole in
the basin/ bath ensuring the washer is
tted between the tap body and the xing
surface to ensure a water tight seal.
3. Screw the xing rod into the bottom
of the tap body. Slide the 'C' shaped
rubber washer and 'C' shaped metal
washer onto the xing rod up to the
underside of the basin/ bath.
4. To secure the tap body in place tighten
the xing nut onto the xing rod until it is
fully tightened against the 'C' shaped
metal washer. The xing nut can be
tighten with a suitable spanner.
5. Connect the exi tails to the hot and
cold water supplies.
6. Turn on both water supplies, operate
both handles, letting the water ow for a
few minutes to ush through the system.
7. Fit the clicker waste (basin mixer only)
ensuring the rubber washer is tted
between the basin and the waste. Place
the other rubber washer under the basin
and secure by tightening the backnut, in
order to ll the basin, the button in the
middle of the waste needs to be pressed
down. To release the water, press the
button again.
8. Check all joints and connections for any
leaks.
10
Installation Cont.
Bath Filler and Bath Shower Mixer
1. Fit the bath ller / bath shower mixer
to the bath ensuring that the washers are
tted between the body and the bath.
2. Secure the tap to the bath using the
washers and metal backnuts Tighten
the backnuts onto the threaded tails. A
suitable spanner may be required to fully
tighten the backnuts.
3. Connect the hot and cold water
supplies to the threaded tails using
a ¾” BSP connector (not supplied).
4. Bath Shower Mixer only - t the shower
hose to the hose outlet using the small
sealing washer, and the handset to the
hose using the small washer.
Important:
Prior to the drilling into walls, check
there no hidden electrical wires, cables or
water supply pipes with the aid of an
electronic detector.
If you use power tools do not forget to:
• Wear eye protection
• Unplug equipment after use
Fit the wall bracket (not shown) to the wall
using the xings supplied, ensuring the
handset and hose reaches it.
5. Turn on both water supplies and turn
both handles to the on position, letting
the water ow for a few minutes to ush
through the system.
6. Check all joins and connections for any
leaks.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisers.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios de cocina y baño de Bristan
Bristan
Bristan Gummers H64WMT Instrucciones de montaje
Bristan
Bristan GLL RAPSNK3 C Instrucciones de montaje
Bristan
Bristan Liquorice LQR PROSNK C Diagrama de cableado
Bristan
Bristan QD 1/2 C Diagrama de cableado
Bristan
Bristan CAS BAS C Manual de usuario
Bristan
Bristan FH TDRD01 C Manual de usuario
Bristan
Bristan FLT 3HBAS C Manual de usuario
Bristan
Bristan AR THBSM C Manual de usuario
Bristan
Bristan MINI2 TS1203 CL C Instrucciones de montaje
Bristan
Bristan GWF BF C Diagrama de cableado
Bristan
Bristan Java Manual de usuario
Bristan
Bristan Z2 BIB C Diagrama de cableado
Bristan
Bristan Acute AE 1/2 C Manual de usuario
Bristan
Bristan Pear PEA PULLSNK C Diagrama de cableado
Bristan
Bristan Java Series Diagrama de cableado
Bristan
Bristan Hourglass HOU 1HBF C Diagrama de cableado
Bristan
Bristan Kingsbury Diagrama de cableado
Bristan
Bristan Z2 LUX 1/2 C Diagrama de cableado
Bristan
Bristan Club DUC HNK C Manual de usuario
Bristan
Bristan W BASIN04 C Manual de usuario
Manuales populares de Accesorios de cocina y baño de otras marcas
Alpha Bidet
Alpha Bidet Alpha One Manual de usuario
InSinkErator
InSinkErator H/HC3300 Manual de instalación
Clou
Clou Xo type 1 Manual de usuario
Kohler
Kohler Contra 26448T-4 Manual de usuario
Grohe
Grohe Bridgeford 20 158 Manual de usuario
Hans Grohe
Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Manual de usuario