BRICK HOUSE IP28 iVu Manual de usuario
WHEN YOU NEED TO KNOW.
iVu WiFi Hidden Camera Clock
User’s Guide
iVu WiFi Hidden Camera Clock
The iVu WiFi Hidden Camera Clock a is a fully functional clock, displaying
time in an adjustable 12 or 24-hour format. This hidden cam records video
in high definition 1080p resolution at 25 frames per second. Select from
customizable recording mode settings; either continuous or motion activated
recording. View your video remotely view through the free Pro iCam mobile
application, supported on iOS or Android. Or, record video locally to a
microSD card (up to 32GB, not included). This covert camera can run up to
three hours on a single battery charge.
In the Box:
In the box you will find the iVu WiFi Hidden Camera Clock, USB Cable, AC
Power Adapter, a Rechargeable Battery, and this User’s Guide.
1. Blue Indicator Light 2. Set Button
3. Up Button 4. Down Button
5. Time Display 6. WiFi Indicator Light
7. Micro SD Card Slot 8. Reset Key
9. On/Off Switch 10. USB Port
11. Battery
Getting Started
The first step in using your clock cam is to take off the back cover of
the camera and remove the protective seal tabs from the battery. We
recommend charging the device for a full 5 hours before first use.
Next, go to the App or Google Play store and download the free “Pro iCam”
application.
At this point you can insert a microSD card into the slot located on the back
side of the camera. This camera will work without the presence of an SD
card; it is not recommended, however. If the network connection is lost, the
camera could miss capturing video without an SD card providing backup
storage. Next, turn device to the “On” position.
Getting to Know the Pro iCam App
Conguring A Local Wireless Network Connection
By connecting to your camera through its WiFi hotspot connection (known as
“Direct Connect”), you’re able to view your video locally within 100 feet of the
device.
To begin, switch the Power button to the On position. The Indicator light is
located on the back left side of the device next to the USB input; it will flash
red and blue as the clock camera is establishing its WiFi connection.
Note: It takes up to 5 minutes for the camera’s hotspot/WiFi to send out a
signal after the device is fully charged and powered on.
After 5 minutes, open the WiFi settings on your mobile device (smartphone
or tablet). From here you will locate the Camera’s WiFi device name:
“YMxxxxxxxxxxxxxx” (with the X’s representing a unique combination of
numbers and letters specific to your camera). Select this network and
connect. Once you connect successfully you will exit out of the WiFi menu.
You are now connected to the camera’s WiFi Wireless Hotspot Network.
Next, open the Pro iCam application from your mobile device. On the upper
right-hand corner select the + icon and select “Add new online camera”. The
default password will automatically populate in the Password field. Select
Search and your camera will appear.
Note: The camera’s default password is (8888).
Select your camera and click OK. Your camera is now online; from here you
can customize your settings.
In the next section we’ll cover connecting your camera to your WiFi network
(known as a “P2P Connection”), enabling you to view video remotely.
Tabla de contenidos
Otros manuales de Cámara de seguridad de BRICK HOUSE
