Breville Vin276 Manual de usuario

product safety

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

This product can be used by children aged 8 years and above, and persons

who require supervision, provided:

• they are familiar with the hazards associated with the product, and,

• they receive instruction by a competent person on how to safely use the

product.

Children must not play with the product. Cleaning and user maintenance

must not be done by children unless they are supervised.

Keep the appliance and its cord out of reach of children less than 8 years

old when it is switched on or cooling down.

The appliance must not be left unattended when it is connected to the

mains supply.

The appliance must be unplugged from the mains supply socket before

llingthewatertankwithwater.

Always use the appliance on a stable, secure, dry and level surface. When

placing the appliance on its stand, ensure that the surface on which the

stand is placed is stable.

Do not use the appliance if it has been dropped, if there are any visible

signs of damage or if it is leaking.

If the supply cord is damaged, it must be replaced by the manufacturer, its

serviceagentorsimilarlyqualiedpersonsinordertoavoidahazard.

!Never use this appliance for anything other than its intended use. This appliance is for

household use only. Do not use this appliance outdoors.

!Always ensure that hands are dry before handling the plug or switching on the

appliance.

!Do not touch the metal parts of the appliance during use as they may become very hot.

!This appliance must not be placed on or near any potentially hot surfaces (such as a

gas or electric hob).

!Always allow the appliance to cool before cleaning or storing.

!Never immerse any part of the appliance or power cord and plug in water or any other

liquid.

!Never let the power cord hang over the edge of a worktop, touch hot surfaces or

become knotted, trapped or pinched.

!This appliance produces steam which can cause burns. Handle with care especially

when using the vertical steam feature. Never direct steam at persons or animals.

!Ensure the appliance is switched off and unplugged from the supply socket before

lling or emptying the water tank, after use and before cleaning.

features

1. Water tank inlet cover

2. Steam control

3. Shot of steam button

4. Spray button

5. Temperature select button

6. Display

7. Heel rest

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

8. Cord wrap

9. Premium Nano nish soleplate

10. Water tank

11. Self clean button

12. Water level maximum indicator

13. Spray nozzle

MAX

wertq

beforerstuse

Remove all packaging including any soleplate protection before using your iron.

General

Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the

methylated spirit with a damp cloth then dry the soleplate thoroughly.

Before connecting your iron to the mains supply, make sure your supply voltage is the

same as the one indicated on your iron.

When you rst use your iron, there may be a slight odour and it may smoke slightly for the

rst few minutes of operation. This is quite normal and will disappear.

Cleaning your iron before use

Follow these simple steps to remove any impurities or residues inside your steam iron

that may be left over from the manufacturing process.

1. Follow the instructions under lling your iron and ll the water tank as described.

Empty the water tank to rinse out any foreign particles then rell it.

2. Follow the instructions under steam ironing. Set the temperature to the DENIM

setting and the steam control to the maximum steam setting (3).

3. Iron an old piece of cloth (cotton or towelling is ideal) for a few minutes. While ironing,

press the steam button 4 or 5 times.

4. Any impurities will be ushed from your iron by the steam and absorbed by the cloth.

5. Your iron is now ready for use.

llingyouriron

Never use fabric conditioner, starches or any other chemicals or additives.

1. Ensure the iron is switched off and unplugged from the mains supply socket.

2. Set the steam control to the no steam position (0).

3. Place the iron on its heel on a at, stable, dry, heat resistant and level surface and

open the water tank inlet cover.

4. Fill the water tank with ordinary tap water. To avoid air locks, tilt the iron slightly while

lling it.

5. Don’t ll the iron above the water level indicator MAX marking. Check the water level

by standing the iron on its heel.

6. When the iron is lled close the water tank inlet cover.

MAX

The backlit temperature display allows you to select from seven fabric types by using the

temperature select button.

The temperature select button can be moved forwards (towards the front of your iron) or

backwards (towards the heel of your iron).

For example, to select the COTTON setting:

1. Move the temperature select button forwards several times until COTTON is

selected. Each time you move the temperature select button, your iron will beep and

a different fabric setting will be selected.

2. Your iron will begin to heat up and the temperature indicator icon ( ) will ash. The

handle of your iron will light up blue.

3. When the selected temperature has been reached, your iron will beep once, the

temperature indicator icon will stop ashing and the handle will light up red.

4. To decrease the temperature of your iron (e.g from COTTON to SILK, move the

temperature select button backwards until SILK is selected.

IMPORTANT: When the fabric type is changed from one that requires a high

temperature to one that requires a lower temperature (e.g. from COTTON to SILK),

the temperature indicator icon will start to ash and the handle illumination will turn

to blue. This indicates that your iron is cooling down to the new setting. To ensure

that your iron has cooled to the selected temperature and is not too hot, wait until

your iron beeps once, the temperature indicator icon stops ashing and the handle

illumination has turned to red before ironing.

display

Temperature indicator

Fabric types

Dry water tank icon

‘Dot’ setting

Steam icon

using your iron

We recommend that you:

• Start with fabrics that require lower temperatures such as SYNTHETIC, SILK, etc.

Finish ironing with those fabrics which respond best to higher temperatures such as

LINEN, DENIM, etc.

• If you iron a fabric made of a blend of bres set your iron for the most delicate bre

e.g. VELVET or SILK.

• Never use the burst of steam button on silks or synthetics.

• When using starch, it should be sprayed onto the reverse side of the fabric and the

soleplate cleaned more frequently.

• Do not iron over sharp or hard objects such as buttons, studs and zippers, as these

will scratch the surface of the soleplate.

using your iron

Ironing without steam

If you intend to dry iron fabrics, there is no need to ll the water tank. However, if water is

already in the water tank, you do not need to empty it.

1. Set the steam control to the no steam position (0).

2. Plug your iron into the mains supply and switch on.

3. Select the desired fabric setting using the temperature select button.

4. Your iron will begin to heat up and the temperature indicator icon ( ) will ash. The

handle of your iron will light up blue.

5. When the selected temperature has been reached, your iron will beep once, the

temperature indicator icon will stop ashing and the handle will light up red. Your iron

is now ready to use.

Steam ironing

During steam ironing, if you do not allow the iron to reach the selected

temperature, water may drip from the soleplate.

It is recommended that for harder to iron fabrics such as cotton and linen, steam should

be used when ironing. Steam should never be used on delicate fabrics like nylons,

acrylics and synthetics.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Select the desired fabric setting using the temperature select buttons. For steam

ironing, the fabric setting must be either WOOL, COTTON, LINEN or DENIM. If you

select any other fabric type, your iron will not produce steam.

Note: When the iron is in the steam range, the steam icon ( ) will appear on the

display. Note that less volume of steam is produced on the WOOL and COTTON

fabric settings and more steam is produced on the LINEN and DENIM settings.

4. Your iron will begin to heat up and the temperature indicator icon ( ) will ash. The

handle of your iron will light up blue.

5. When the selected temperature has been reached, your iron will beep once, the

temperature indicator icon will stop ashing and the handle will light up red. Your iron

is now ready to use.

6. Adjust the steam control for the desired steam output.

7. Move the steam control towards the maximum steam position (3) to increase the

amount of steam, or towards the no steam position (0) to decrease the amount of

steam.

8. The steam can be shut off at any time by setting the steam control to the no steam

position (0).

Shot of Steam

When using the shot of steam function the fabric setting must be either WOOL, COTTON,

DENIM or LINEN. If you select any other fabric type, your iron will not produce steam.

Wait for several seconds between each press of the steam button.

Press the shot of steam button whenever you have a stubborn crease that needs extra

steam. Steam will burst from the holes in the soleplate into the fabric.

Vertical Steam Ironing

Never iron garments when they are being worn.

Your iron can be used for vertical steam ironing. This process can be applied to curtains,

dresses on hangers etc.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Select the desired fabric setting using the temperature select buttons. For steam

ironing, the fabric setting must be either WOOL, COTTON, LINEN or DENIM. If you

select any other fabric type, your iron will not produce steam.

Note: When the iron is in the steam range, the steam icon ( ) will appear on the

display. Note that less volume of steam is produced on the WOOL and COTTON

fabric settings and more steam is produced on the LINEN and DENIM settings.

4. Your iron will begin to heat up and the temperature indicator icon ( ) will ash. The

handle of your iron will light up blue.

5. When the selected temperature has been reached, your iron will beep once, the

temperature indicator icon will stop ashing and the handle will light up red. Your iron

is now ready to use.

6. Hold the iron 15cm (6 inches) from the fabric.

7. Press the shot of steam button. The steam will penetrate the fabric removing the

creases. To apply more steam press the shot of steam button again.

using your iron

Spraying

The spray function will only operate when there is water in the water tank.

1. The water spray can be used to help iron heavy fabrics or difcult areas (collars,

pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics

which cannot be steam ironed.

2. Simply press the button as required to produce a spray of water. If the spray is being

used for the rst time, or if the iron has been standing for some time, you may need

to press the spray button a few times before it works correctly.

Dry Tank Alert

Your iron will warn you if the water tank requires lling. The dry tank icon ( ) will appear

on the display when the water tank requires lling. Follow the instructions on page 5 to

rell the water tank.

Anti-Drip Function

When the temperature of your iron is insufcient to create steam, the supply of water is

cut off automatically to avoid any drips from the soleplate.

Anti-Scale Filter

Your iron is tted with a permanent anti-scale lter. This lter is xed and cannot be

removed for cleaning.

The lter is designed to reduce the build-up of limescale inside your iron. Limescale

occurs during steam ironing due to water hardness.

Water hardness varies from one area to another. The effectiveness of the lter will

depend on how ‘hard’ your water is.

Safety Auto Shut-off Feature

ALWAYS turn the iron off and disconnect from the power source after use.

NEVER leave the iron unattended with the Auto Shut-off function in operation.

The iron will shut off if it has not been used for 10 minutes when resting on its heel,

or after 30 seconds with the iron resting on its soleplate. The AUTO OFF light on the

display will start to ash and your iron will sound a series of beeps. This sequence will be

repeated every 30 seconds whilst the iron is in auto shut-off mode. To restart your iron,

gently move it until the AUTO OFF light turns off.

Otros manuales para vin276

Tabla de contenidos

Otros manuales de Hierro de Breville

Breville

Breville VIN170 Manual de usuario

Breville

Breville Power Steam VIN177 Manual de usuario

Breville

Breville DiamondXpress VIN420X Manual de usuario

Breville

Breville VIN245 Manual de usuario

Breville

Breville vin276 Manual de usuario

Breville

Breville VSG002X Manual de usuario

Breville

Breville SuperSteam VIN412 Manual de usuario

Breville

Breville VIN210 Manual de usuario

Breville

Breville Power Steam VIN337 Manual de usuario

Breville

Breville PressXpress soleTEMP VIN411 Series Manual de usuario

Breville

Breville power steam advanced 2400w Manual de usuario

Breville

Breville VIN067 Manual de usuario

Breville

Breville PressXpress soleTEMP VIN411X Manual de usuario

Breville

Breville PressXpress VIN410 Series Manual de usuario

Breville

Breville VIN169 Guía de solución de problemas

Breville

Breville Easy Glide VIN290 Manual de usuario

Breville

Breville VIN170X Manual de usuario

Breville

Breville Easy Glide VIN255 Manual de usuario

Breville

Breville VIN253X Manual de usuario

Breville

Breville SuperSteam VIN412 Manual de usuario

Breville

Breville VIN225 Manual de usuario

Breville

Breville Press Xpress 2800W Manual de usuario

Breville

Breville Technique Manual de usuario

Breville

Breville Easy Glide VIN243 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario