Breville Technique Manual de usuario

www.breville.co.uk

Please read these instructions before operating the appliance and retain them for

future use.

This product is not suitable for use by children, and may not be suitable for persons

requiring supervision unless they receive instruction by a competent person on how to

safely use the product. Children should be supervised to ensure that they do not play

with the product.

Never use this appliance for anything other than its intended use. This appliance is for

household use only. Do not use this appliance outdoors.

Always ensure that hands are dry before handling the plug or switching on the

appliance.

Never leave the appliance unattended when it is connected to the mains supply.

Ensure the appliance is switched off and unplugged from the supply socket before

lling or emptying the water tank, after use and before cleaning.

Do not use the appliance if it has been dropped, if there are any visible signs of

damage or if it is leaking.

Always use the appliance on a stable, secure, dry and level surface. When placing the

appliance on its stand, ensure that the surface on which the stand is placed is stable.

Do not touch the metal parts of the appliance during use as they may become very hot.

This appliance must not be placed on or near any potentially hot surfaces (such as a

gas or electric hob).

The power cord is not replaceable by the user. Always return the appliance if the power

cord is damaged to avoid any hazard.

Always allow the appliance to cool before cleaning or storing.

Never immerse any part of the appliance or power cord and plug in water or any other

liquid.

Never let the power cord hang over the edge of a worktop, touch hot surfaces or

become knotted, trapped or pinched.

product safety

features

q we r

sdfg

Water tank inlet cover

Steam control

Shot of steam button

Spray button

Power / auto shut-off function light

Temperature selector

Temperature indicator light

Flexible cord protector

y u i

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

Heel rest

Cord wrap

Ceramic soleplate

Self clean button

Water level maximum indicator

Pointer

Water tank

Spray nozzle

10.

11.

12.

13.

14.

15.

16.

before rst use

Remove all packaging including any soleplate protection before heating the

iron.

Wipe over the soleplate with a cloth moistened with methylated spirit. Remove the

methylated spirit with a damp cloth then dry the soleplate thoroughly.

Fill the water tank and then empty it. This will rinse out any foreign particles remaining in

the water tank from the manufacturing process. Never ll your iron directly under a tap.

Always use the measuring cup supplied.

Before connecting your iron to the mains supply, make sure your supply voltage is the

same as the one indicated on your iron.

When you rst use your iron, there may be a slight odour and it may smoke slightly for the

rst few minutes of operation. This is quite normal and will disappear.

lling your iron

Never add fabric conditioner, starches or any other chemicals to the water in

your iron.

Ensure the iron is switched off and unplugged from the mains supply socket.

Set the steam control to the no steam position ( ).

Place your iron horizontally on a at, stable, dry, heat resistant and level surface and

open the water tank inlet cover.

Fill the water tank with ordinary tap water. To avoid air locks, tilt your iron slightly

while lling it.

Don’t ll the iron above the water level indicator MAX marking. Check the water level

by standing the iron on its heel.

When the iron is lled close the water tank inlet cover.

using your iron

We recommend that you:

Start by ironing those items of laundry that require the lowest temperature (e.g.

synthetics). Finish by ironing fabrics which respond best to higher temperatures and

steam—such as cotton and linen.

If you iron a fabric made of a blend of bres set the temperature of your iron to the

most delicate bre.

Never use the burst of steam button on silks or synthetics.

When using starch, it should be sprayed onto the reverse side of the fabric and the

soleplate cleaned more frequently.

Do not iron over sharp or hard objects such as buttons, studs or zippers as they will

scratch the soleplate of your iron.

Important

Your iron takes time to heat up and cool down. If you change the temperature setting on

your iron, you must give it time to adjust to the new setting.

This is especially important when you change from a high setting to a lower one. It

takes your iron longer to cool down than it does to heat up and this is the reason we

recommend that you begin ironing at lower temperatures.

If you do need to reduce the temperature of your iron, wait until the temperature indicator

light comes on and then goes off again before ironing. This will ensure that your iron has

reached the lower temperature and is not too hot for the fabric being ironed.

For example, you have been ironing using the lll setting and want to change to the ll

setting:

Move the temperature control dial to the ll setting. Initially, the temperature indicator

light will not be lit because your iron is still at a higher temperature.

Wait until the temperature indicator light comes on and then goes out again. Your iron

has now cooled to the correct temperature.

•

using your iron

Ironing without steam

If you intend to dry-iron fabrics there is no need to ll the water tank. However, if water is

already in the water tank, you don’t need to empty it.

Set the steam control to the no steam position ( ) position.

Plug your iron into the mains supply and switch on.

Rotate the temperature control dial until the desired setting is aligned with the

indicator light/dial pointer.

The temperature indicator light will illuminate while your iron is heating up. When the

light goes out, your iron is ready to use.

Steam ironing

During steam ironing, if you do not allow your iron to reach the selected

temperature water may drip from the soleplate.

It is recommended that for harder to iron fabrics such as cotton and linen, steam should

be used when ironing.

When ironing cotton and linen, always select the highest temperature. Steam should

never be used on delicate fabrics like nylons, acrylics and synthetics.

Fill your iron with water.

Plug your iron into the mains supply and switch on.

Set the temperature control dial so it is within the steam range (ll or lll). The

hotter your iron, the more steam is generated.

The temperature indicator light will illuminate. When the temperature indicator light

goes out your iron is ready to use. The temperature indicator light will turn on and off

during ironing as your iron maintains the correct temperature.

Adjust the steam control lever to select the desired steam output.

Move the steam control lever backwards to increase the amount of steam, or

forwards to decrease the amount of steam.

The steam can be shut off at any time by setting the steam control to the no steam

( ) position.

Burst of steam

The temperature control dial must be set within the ll and lll setting. Wait several

seconds between each press of the steam button.

Press the shot of steam button whenever you have a stubborn crease that needs extra

steam. Steam will burst from the holes in the soleplate of your iron into the fabric.

using your iron

Vertical steam ironing

Never iron garments when they are being worn.

Your iron can be used for vertical steam ironing curtains, dresses on hangers etc.

Fill your iron with water.

Plug your iron into the mains supply and switch on.

Set the temperature control dial so it is within the steam range (ll or lll). The

hotter your iron, the more steam is generated.

The temperature indicator light illuminates to show that your iron is heating. When

the temperature indicator light goes out, your iron is ready to use.

Hold your iron 15cm (6 inches) from the fabric.

Press the shot of steam button. The steam will penetrate the fabric removing the

creases. To apply more steam press the shot of steam button again.

Precondition steam

Keep children away from the front of the iron and do not hold your ngers in

front of the soleplate when using the precondition steam feature.

For difcult areas (e.g. collars, cuffs, pockets, etc.) press the burst of steam button. The

special steam channels in the soleplate deliver more steam around the front part of the

iron preconditioning the fabric before you iron it for easier and faster ironing.

Spraying

The spray function will only operate when there is water in the water tank.

The water spray can be used to help iron heavy fabrics or difcult areas (collars,

pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics

which cannot be steam ironed.

Simply press the button as required to produce a spray of water. If the spray is being

used for the rst time, or if the iron has been standing for some time, you may need

to press the spray button a few times before it works correctly.

Anti-drip feature

When the temperature of your iron is insufcient to create steam, the supply of water is

cut off automatically to avoid any drips from the soleplate.

using your iron

Anti-scale lter

Your iron is tted with a permanent anti-scale lter. This lter is xed and cannot be

removed for cleaning.

The lter is designed to reduce the build-up of limescale inside your iron. Limescale

occurs during steam ironing due to water hardness.

Water hardness varies from one area to another. The effectiveness of the lter will

depend on how ‘hard’ your water is.

Safety auto shut-off function

ALWAYS disconnect your iron from the mains supply socket after use. NEVER

leave the iron unattended with the Auto Shut-off function in operation.

Your iron will shut off if it has not been used for 10 minutes when resting on its heel, or

after 30 seconds if it is resting on its soleplate. The power/auto shut-off function light in

the iron handle will start to ash and your iron will sound a series of beeps. This will be

repeated whilst your iron is in auto shut-off mode. To restart your iron, gently move it until

the power/auto shut-off function light stops ashing.

•

care and cleaning

Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior

of your iron because they will damage the surface.

Cleaning the soleplate of your Iron

After each use, allow your iron to completely cool down before wiping the soleplate with

a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while

your iron is still hot. If necessary, allow your iron to completely cool down then wipe over

the soleplate with a soft cloth moistened with methylated spirits. Remove the methylated

spirit with a damp cloth. Make sure that the soleplate is completely dry.

Self-cleaning

Only press the self-clean button when you want to activate the self cleaning

system. Never press the self-clean button when ironing.

The self-clean function removes scale and impurities. Use the self-clean function once

every two weeks. If the water in your area is very hard, the self clean function should be

used more frequently.

Ensure your iron is switched off and unplugged from the mains supply socket.

Set the steam control to the no steam ( ) position.

Fill your iron with water to the MAX level.

Stand your iron on its heel rest, plug in and switch on at the mains supply.

Set the temperature control dial to the highest (MAX) setting. Allow your iron to heat

up until the temperature indicator light goes out.

Unplug your iron and hold it over a sink with the sole-plate facing downwards.

Press and hold the self-clean button. Hot water and steam will be ejected from the

holes in the soleplate along with any impurities.

Release the self-clean button after one minute or when the water tank is empty.

Stand your iron on its heel rest, plug it in to the mains supply socket and switch on.

When the temperature indicator light goes out, iron an old piece of cloth to allow any

remaining water to escape.

After use, switch off and unplug your iron from the mains supply and allow it to fully

cool. Empty out any remaining water.

10.

Otros manuales para Technique

Tabla de contenidos

Otros manuales de Hierro de Breville

Breville

Breville PressXpress soleTEMP VIN411 Series Manual de usuario

Breville

Breville VIN439 Manual de usuario

Breville

Breville VIN143 Manual de usuario

Breville

Breville Power Steam VIN253 Manual de usuario

Breville

Breville VIN169 Guía de solución de problemas

Breville

Breville Power Steam VIN291 Manual de usuario

Breville

Breville VIN067 Manual de usuario

Breville

Breville Easy Glide VIN255 Manual de usuario

Breville

Breville vin276 Manual de usuario

Breville

Breville Power Steam VIN358 Manual de usuario

Breville

Breville VIN359 Manual de usuario

Breville

Breville VIN253X Manual de usuario

Breville

Breville VIN325X Manual de usuario

Breville

Breville SuperSteam VIN412 Manual de usuario

Breville

Breville Power Steam VIN299 Manual de usuario

Breville

Breville power steam advanced 2400w Manual de usuario

Breville

Breville Power Steam VIN352 Manual de usuario

Breville

Breville Press Xpress 2800W Manual de usuario

Breville

Breville Power Steam VIN268 Manual de usuario

Breville

Breville Easy Glide VIN243 Manual de usuario

Breville

Breville Power Steam VIN337 Manual de usuario

Breville

Breville VIN250X Manual de usuario

Breville

Breville VIN170X Manual de usuario

Breville

Breville TECHnique digital VIN158 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario