Breeze ECT Manual de usuario

..an embedded design lab

Breeze Embedded Computing Terminal

User’s Guide

..an embedded design lab

Disclaimer

This Manual has been reviewed and validated for accuracy. The descriptions it contains are

accurate for Breeze Embedded Computing Terminal. Breeze Innovation Pvt. Ltd. assumes no

liability for damages incurred directly or indirectly from errors, omissions or discrepancies that

may appear in this manual including the product and the software described in it. It may also

be noted that this Manual is subject to change without notice.

Trademarks

All Trademarks and Brand names appearing in this Manual may or may not be Registered

Trade Marks or Brand names of the respective companies and are used only for identification

and explanation to the benefit of the user.

Doc No: UG04081604

..an embedded design lab

Contents

1. INTRODUCTION....................................................................................................................................4

2. INSTALLATION......................................................................................................................................5

2.1 Box Contents.....................................................................................................................................5

2.2 Do’s and Don’ts ................................................................................................................................5

2.3 Connecting the Cables to Terminal...................................................................................................5

2.4 Switching On the Terminal...............................................................................................................6

3. BREEZE ECT CONFIGURATION.......................................................................................................7

3.1 Configuring the terminal...................................................................................................................7

3.2 Terminal Screen Shortcut keys .........................................................................................................8

4. USER CONFIGURATION...................................................................................................................11

4.1 Profile Manager ..............................................................................................................................11

4.2 Menu...............................................................................................................................................12

4.3 Profile Manager ..............................................................................................................................13

4.3.1 Navigating the Settings in Menu.................................................................................................13

4.3.2 Save Settings...............................................................................................................................13

4.3.3 Menu –a comprehensive List .....................................................................................................14

4.3.4 Options Category........................................................................................................................15

4.3.5 Video Menu ................................................................................................................................17

4.3.6 Keyboard Menu ..........................................................................................................................18

4.3.7 SerialPort1 Menu........................................................................................................................21

4.3.8 SerialPort2 Menu........................................................................................................................23

4.3.9 Print Settings Menu.....................................................................................................................24

4.3.10 Term. Emul. Menu......................................................................................................................26

4.3.11 Profile Config .............................................................................................................................27

4.4 Reset ...............................................................................................................................................28

4.5 Power off.........................................................................................................................................29

5. ECT KEYBOARD LAYOUT................................................................................................................30

6. SERIAL PORT (RS-232 9 PIN ) INTERFACE.................................................................................32

7. SERIAL PORT (RS-232 25 PIN ) INTERFACE...............................................................................33

8. PARALLEL PORT INTERFACE ........................................................................................................35

9. GLOSSARY ..........................................................................................................................................36

..an embedded design lab

INTRODUCTION

Breeze ECT is a standalone terminal used to connect to Railway Application servers through Serial

port or through LAN for performing various activities related to Railways Ticketing applications

This can be used as a Dumb Terminal or Client of a Server based Computing System wherein all

applications and data are deployed, managed and supported on the Server. In addition, the entire

execution of the application takes place on the server. As the application logic is separated from the

user interface i.e., screen updates at the server and transported to the client, the Bandwidth occupied

is very less.

The Breeze ECT is a DEC VT320 Compatible data communication display terminal with many

advanced features. It consists of Three Modules. They are Display unit, Control Unit, and Keyboard

Unit. The Keyboard is Detachable.

This manual is intended for the users of ECT and provides the information needed to install and

operate the ECT. Screenshots have been used wherever possible to improve understanding.

Breeze ECT Features

Customized Embedded Linux OS.

Hindi language (ISCII 83/88) Printing Support.

Password Protected Setup for Local Terminal Configuration.

VT320 Terminal Emulation support with answerback.

Fully Compatible with DEC VT320 terminals.

IBM PC Keyboard Support.

A User Programmable Setup to configure the terminal’s Operating Parameters.

80 Column and 132 Column display.

Additional Status Line indicating cursor row/column and time.

Support for Centronics Parallel Printers and Serial Printers.

Telnet connectivity to Unix/Linux through LAN.

Profile configuration for choosing interfaces and server.

Ports / Interfaces

Two (RS232C) Serial Ports - One 9pin & 25Pin D type each

One 25 pin D-type Enhanced Parallel Port

Six USB ports.

Two PS2 Ports

One 10 /100 Mbps RJ45 Ethernet port.

SVGA Video output.

DC 12V Power Connector.

Kensington Lock.

..an embedded design lab

INSTALLATION

This chapter provides instructions to install and turn on ECT. Perform each step in order.

2.1 Box Contents

The ECT comes with the following items. Unpack the carton box and Check to make sure that you

have the following items.

i. ECT (Terminal Unit)

ii. 12V DC Adapter along with power cord

iii. User's Manual CD.

2.2 Do’s and Don’ts

Do’s and don’ts that needs to be taken care while installing the terminal is as follows

Do not place the terminal where it is subjected to a great deal of shock or vibration.

Do not use or place the terminal where there is excessive dust or heat.

Locate the terminal as far as possible from noisy electromechanical devices and avoid

locations that are characterized by strong magnetic fields.

Avoid placing objects on or around the terminal that will restrict the airflow through its

ventilation slots.

Place the terminal on a flat hard surface allowing 5 inches on all sides for ventilation.

Always use a grounded AC power outlet for powering the terminal.

Place the terminal sufficiently near the AC outlet for power connection to avoid any strain

on the AC power cord.

2.3 Connecting the Cables to Terminal

CAUTION: Do not force the connectors into the socket. If any resistance is encountered, ensure

that the connector is oriented correctly to the socket.

Before connecting the cables, ensure that the cables are of the correct lengths. Before applying power

to the terminal ensure the following:

Ensure that the Power ON Switch Located at the Front Side of the terminal is switched

off before connecting the connectors. The LED should not be glowing in the terminal.

Place the keyboard in front of the Monitor and connect the keyboard to PS/2 port on the

back side.

In case of using a RS232 Connector, Connect console cable from LANSTERM to the

Terminal to DB25 connector in the rear side. In case of using DB9 console cable connect

to the DB9 terminal Serial port.

In case of using a network connection, connect a 10/100 Base –T twisted pair network

cable to the network connector.

Depending on the configuration needs, connect a printer to the parallel port

Connect the video signal cable from the monitor to the 15 pin D type female connector at

the rear side of the Terminal. Secure the cable firmly by tightening the screws available

in the video signal cable.

Plug the Power Cord in to a 230V AC Grounded AC Outlet

..an embedded design lab

2.4 Switching On the Terminal

Connect the Power cord to the DC Adapter

Plug the DC adapter Outlet to the socket in the Terminal.

Connect the monitor to the Power source and switch on the monitor.

Press the power on switch provided in the front side of the Terminal to turn on the

terminal. The power on LED indicator located at the front will glow.

When the terminal turns on, boot messages will appear on the screen and all LEDs in

the keyboard turn on and off.

..an embedded design lab

BREEZE ECT CONFIGURATION

3.1 Configuring the terminal

Once the terminal is switched on, the Profile manager Dialog will appear

Press the Tab key in the Keyboard, So that the “Activate” button is highlighted or

selected. Then Press “Space” key Or “Enter” key to start the profile connection

By Default the profile is connected to Serial port 1.

To change any settings Press F3 in Profile screen or using Menu Button in the Profile

manager.

Figure 1

Once the activate button is pressed the terminal screen is opened as shown below

Figure 2

..an embedded design lab

3.2 Terminal Screen Shortcut keys

The below shortcut keys can be activated once the profile is activated

Switching between Active Profile and Profile manager –Ctrl + up Arrow

Invoke Menu –F3

Quit Menu –F3 / Alt

Activate Menu Item –Underlined Letter

Select item - Underlined Letter / Enter Key

Navigate Menu –Up / Down Arrow / Tab

Navigate inside menu –Right arrow / Left Arrow

Go to Parent Menu - ESC

The menu screen will appear as shown below

Figure 3

Press F3/ Alt in the parent menu to quit.

..an embedded design lab

Help

Invoke Help –Alt + F5

Help screen is displayed as shown

..an embedded design lab

Calendar

Invoke Calendar –Right ALT + Right SHIFT

Calendar Help - F6

Quit calendar –F11

Calendar screen is displayed as shown.

Figure 4

In Calendar Screen press F6 for help, to show the options as shown.

Figure 5

Tabla de contenidos

Otros manuales de Terminal táctil de Breeze

Breeze

Breeze All-in-one Hardware System Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario