Bpt Agata VC Manual de usuario

Agata V – Agata VC

Agata VC/B – Agata VC/B-L

FB00080-EN

USER MANUAL

AGATA V - AGATA VC

AGATA VC/B - AGATA VC/B-L

INTERNAL VIDEO

RECEIVER

Page 2- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Function of buttons

Press repeatedly to adjust the ringtone volume: low, medium, high, o (red LED

on).

Press repeatedly to adjust the screen brightness.

This function is available when video is activated.

For devices with black and white LCD, press repeatedly to adjust the contrast.

For devices with colour LCD, press repeatedly to adjust the screen colour

saturation.

This function is available when video is activated.

Auxiliary 1

Active also when there is no communication if the system permits it.

Auxiliary 2 / Concierge call (green LED).

1-8 Intercom buttons 1-8

Pressing for < 2 seconds (red ﬂashing LED) activates intercom calls from 5 to

Pressing for > 2 seconds (red LED on) sends a panic signal to the concierge

desk (where present).

Activates and selects the entry panel (blue LED).

This function is available only when the line is free.

Door lock release (blue LED).

During a call from an entry panel or self-connection, the permanently lit LED

indicates that the door is open (the system must be set up as necessary to

generate this signal).

Only use soft, dry or slightly damp cloths to clean; do not use any chemical products.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Page 3- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Standard functions

Call in progress.

Answering a call.

Communication activated.

Entry panel door lock release.

Ending the communication

MASTER

SLAVE

Page 4- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Self-connection

Press the key to activate video

communication with the entry panel.

Where there is more than one entry panel,

press the key multiple times to show

all the panels in succession.

Video toggle

For simultaneous

video calls on multiple

receivers, all receivers

will ring but video will

be activated only on the

MASTER receivers.

Viewing can be

transferred to a SLAVE

receiver by pressing the

key.

For audio

communication with

the entry panel, pick up

the handset.

Int. 1 Int. 2

Int. 2

Int. 2Int. 1

Int. 1

2Int. 1

Page 5- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

With a call active,

select the internal

receiver to which

the call is to be

transferred.

As soon as the

internal receiver

which has been

called picks up the

handset, the call is

active between the

two receivers; the

entry panel remains

on hold.

To connect internal

receiver 2 with

the entry panel,

internal receiver 1

must replace the

handset.

The internal

receiver receiving

the call can

retransfer it.

Call transfer (Agata VC/B - Agata VC/B-L only)

Int. 1

Page 6- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Intercom (Agata VC/B - Agata VC/B-L only)

To call an internal receiver,

pick up the handset and press

the button for the receiver you

want.

During a conversation between

internal receivers, a call from

an entry panel is signalled to

the receivers with a beep that

is repeated every 5”.

3 successive beeps indicate

that it is not possible to make

calls because the line is busy.

CALL ME

call n2

PANIC 2

ALARM

CALL ME

call n2

PANIC 2

ALARM

ALARM!

Page 7- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Concierge desk functions (Agata VC/B - Agata VC/B-L only)

The functions described in this chapter are only available in systems equipped with a

concierge desk.

Call from concierge notiﬁcation

When the Aux2 LED is on, this indicates that

the concierge wants to be called back.

The LED turns o when communication with

the concierge begins.

Press the button for at least 2 seconds;

the receiver beeps and the red LED turns on

to conﬁrm that the panic signal has been sent

to the concierge, together with the caller’s

number. The receiver LED stays on until the

concierge calls the user back.

The panic signal takes priority over all calls.

Panic button function

Alarm signal

When an alarm contact connected to

the relevant receiver input is activated,

this sends a signal to the concierge and

the receiver beeps intermittently for

approximately 10 seconds.

Decommissioning and disposal. Dispose of the packaging material and the device at the end of

itslifecycleresponsibly,incompliancewiththelawsinforceinthecountrywheretheproductisused.

The recyclable components are marked with a symbol and the material's ID marker.

THESE INSTRUCTIONS MUST BE ATTACHED TO THE DEVICE; THE DATA AND INFORMATION ARE TO BE CONSIDERED AS SUBJECT

TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING.

Came S.p.A.

Via Martiri Della Libertà, 15 Via Cornia, 1/b - 1/c

31030 Dosson di Casier

Treviso - Italy

33079 Sesto al Reghena

Pordenone - Italy

(+39) 0422 4940

(+39) 0422 4941

(+39) 0434 698111

(+39) 0434 698434

www.came.com

Page 8- Manual code FB00080-EN - vers. 1

- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.

Otros manuales para Agata VC

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Bpt