B+K precision Sefram DAS240 Manual

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

NA_ENR_DAS240_CONF_VOIE Version: 1

SETTING A CHANNEL DAS240

The recorder DAS240, enable to record the following settings: voltage, current, resistance, temperature (with

a thermocouple, PT100 or PT1000).

We are going to see how to set an acquisition channel, with three examples:

1) Channel 1 configuration with a single voltage

2) Channel 2configuration with a K type thermocouple to measure an ambient temperature

3) Current configuration with a SHUNT resistor

I: Example voltage, setting the channel 1

1- Go to the channels validation by pressing the “Channels and functions On / Off” button:

2- Select the channel. Here we choose channel 1:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

3- Go to the channel setting s by pressing on the channel to be set:

4- Set the type of measurement, here we measure the voltage:

5- Choose an adapted caliber for this voltage, in this example: 20V caliber :

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

6- Set the zero’s position, here we will use the “Min” position because we want to visualize a positive voltage.

The range will be 0 to 20V:

7- It’s possible to use a filter to remove the glitches, here we will choose 10 Hz:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

8- Choose the acquisition period, in the example we will use a « 20 ms » sampling period (each channel can

have their own sampling period which is different of the sampling frequency of the recorder):

9- The configuration of the first channel is completed and we can visualized the signal:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

II: Example K type thermocouple, set the channel 2

1- Go to the channels validation by pressing the “Channels and functions On / Off” button:

2- Select the channel. Here, the channel 2:

3- Go to the settings of the channel by pressing the channel to be set:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

4- Choose the type of measurement, here we measure the temperature with a thermocouple:

5- Setting the type measurement:

1. Choose the thermocouple type, here we will use a K type thermocouple

2. Select the compensation

3. Choose the unit, here we will take the Celsius degree (°)

6- Choose an adapted caliber, in this example we will use a 30°C caliber:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

7- Set the zero’s position, here we will use the “Min” position because we want to visualize the ambient

temperature. The range will be 0 to 30°C:

8- It’s possible to use a filter to remove the glitches, here we will choose 10 Hz:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

9- Choose the acquisition period, in our example we will use a « 20 ms » sampling period, each channel can

have their own sampling period which is different of the sampling frequency of the recorder:

10-The configuration of the second channel is completed and we can visualized the signal:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

III: Example current, setting the channel 3

1- Go to the channels validation by pressing the “Channels and functions On / Off” button:

2- Select the channel. Here, the channel 3:

3- Go to the channel settings by pressing the channel to be set:

SEFRAM INSTRUMENTS SAS - 32, rue E. Martel –BP55 - F42009 –Saint-Etienne Cedex 2 France

Tel: +33 (0)4 77 59 01 01 Fax : +33 (0)4 77 57 23 23

SAS au capital de 1 650 000 euros –RCS Saint-Etienne 790 833 404/ APE: 2651B / SIRET : 790 833 404 00011

TVA Intracommunautaire: FR 19790833404

4- Choose the measurement type, here we measure a current measurement:

5- To measure the current we will use a SHUNT resistor. Choose its value, here we will take a 50 Ωresistor:

6- Choose an adapted caliber, here: 1A caliber:

Otros manuales de Instrumento de medición de B+K precision

B+K precision

B+K precision PR-55 Manual de usuario

B+K precision

B+K precision 889B Manual de usuario

B+K precision

B+K precision 467 Manual de usuario

B+K precision

B+K precision BA8100 Manual de usuario

B+K precision

B+K precision 5335B Manual de usuario

B+K precision

B+K precision 2640 Manual de usuario

B+K precision

B+K precision 2652A Manual de usuario

B+K precision

B+K precision 313C Manual de usuario

B+K precision

B+K precision 2650 Manual de usuario

B+K precision

B+K precision 5335B Manual de usuario

B+K precision

B+K precision 1050 Manual de usuario

B+K precision

B+K precision 600 Manual de usuario

B+K precision

B+K precision 830C Manual de usuario

B+K precision

B+K precision BK603B Manual de usuario

B+K precision

B+K precision 5335C Manual de usuario

B+K precision

B+K precision 302 Manual de usuario

B+K precision

B+K precision 601B Manual de usuario

B+K precision

B+K precision 894 Manual de usuario

B+K precision

B+K precision 4070A Manual de usuario

B+K precision

B+K precision 602 Manual de usuario

B+K precision

B+K precision DAS240-BAT Manual de usuario

B+K precision

B+K precision 2530B Manual de usuario

B+K precision

B+K precision 8550 Series Manual de usuario

B+K precision

B+K precision CP62 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario