Boyd PB4000 Dibujo dimensional

PBM-001

Rev 2

Product Informaon Manual

PEDO Bench

Includes Models: PB4000 & PB4001

12900 44th Street North

Clearwater, Florida 33762

800-255-2693 * 727-561-9292

FAX: 727-561-9393 SALES

FAX: 727-573-1682 SERVICE

www.boydindustries.com

PB4000

PB4001

PBM-001

Rev 2

Table of Contents

Title Page

Table of Contents

Introducon

Applicaon of Product

Warranty Statement

Safety Precauons

About Your Product

Descripon of Product Line

General Product Informaon

Product Specicaons

Feature Operaon

Drawer Removal / Installaon and Adjustment

Unpacking and Installaon Procedure

Light Post Installaon (Oponal)

General Maintenance and Care

Cleaning Informaon

Infecon Control

Service Informaon

Authorized Representave (Europe Only)

5-8

PBM-001

Rev 2

Intended Use and Application of Product

This product is designed to allow dental procedures to be performed in a horizontal posion with an adjustable back rest and

head rest. The PEDO bench has built in storage for non-ammable items. The delivery system (PB4000 only) is located close to the

head of the bench (either le or right hand are available) to allow for easy access.

Warranty Statement

All Boyd manufactured products are warranted against defects in material or workmanship only. No other warranes are

expressed or implied. This warranty shall extend for three (3) years for parts and one (1) year for labor. The Boyd warranty only

covers products manufactured by Boyd. Products distributed, not manufactured, by Boyd carry the stated manufacturer’s

warranty.

The warranty period commences upon invoice date of the equipment. Wrien noce of breach must be submied to Boyd

Industries, Inc. within this period. Boyd reserves the right to repair or replace, at its sole discreon, the item in queson.

Warranty is voided if items are misused or product is improperly maintained or installed. The warranty does not cover any

alteraon of the product from its original condion or if product is used in any way other than the product’s design intent.

An authorized service technician must perform all service and maintenance. Any warranty labor must be rst approved by Boyd.

Failure to coordinate warranty service may result in denial of warranty repair. Wrien log and receipts for service must be

maintained to validate the warranty on Boyd manufactured products.

No claim for consequenal damages will be allowed. Freight damage or mishandling by any third party will not be considered a

warranty item. Improper installaon by a third party causing damage to the equipment is not a warranty item.

Introducon

Congratulaons

on your purchase of the Boyd PEDO Bench

Boyd Industries, Inc. has spent years designing and developing the best products available in the world today. The following

features make your Boyd product the most advanced and funconal product available in the market:

PB4000 & PB4001:

 Manually adjustable seat back

 Cabinet drawer storage

 Oponal aached light

 Oponal instrument tray

PB4000 Only:

 3-Way Syringe

 Dry hand piece hook up

 Wet hand piece hook up

 High Volume Evacuaon (HVE)

 Saliva ejecon (SE)

 PSI indicator

 Oponal assistant package

 Oponal boled (clean) water system

PBM-001

Rev 2

PEDO Bench

Safety Precauons

 Read instrucons:

All safety and operang instrucons including this manual should be read before this product is installed or operated.

 Follow instrucons:

All use and operaon instrucons should be followed.

 Owners manual:

Retain manual for future reference regarding safety and operaon instrucon.

 Heed warnings:

Adhere to all warnings and cauons on the equipment and in the manual.

 Accessories:

Do not use any accessories not recommended by Boyd as they may cause hazards.

 Cleaning:

See General Maintenance and Care secon

 Servicing:

Do not aempt to service this product yourself. Refer any repairs to a qualied service representave.

 Heat / Open ame:

Equipment must be installed away from heat sources such as radiators, heat registers or other sources of heat or open ame.

 Weight restricon:

This bench is designed to safely support a paent weight of 300 lbs. (136.07 kg) that is evenly distributed across the seat. Always

use the anchoring system to ensure stability of this product. Do not aempt to place all of a paent’s weight on the back rest

with it in a raised posion.

PBM-001

Rev 2

Descripon of Product Line

About Your PEDO Bench

Model: PB4000 & PB4001

Features: Manual Back

Storage areas

Instrument Tray (Oponal)

Light Assembly (Oponal)

Chair side units (PB4000 only)

Assistant package (Oponal) (PB4000 only)

General Product Informaon

Cabinet: Wood Construcon

Upholstery: Standard upholstery is vinyl

Upgrades are available

Movement: Manual Seat back

Net Weight: 100 lbs (45.35 kg)

Liquid Protecon: Ordinary equipment (IPX1)

Flammable Gases: Not suitable for use in the presence of ammable gases or where such gases may accumulate in

concentraon. (Closed Space)

Operaon Mode: Connuous

Operang Temperature: 5° C to 40° C (41° F to 104° F)

Temperature: Relave Humidity: 20% to 90% @ 30° C - Not condensing

Atmospheric Pressure: 97kPa

Storage / Transportaon Temperature: -10° C TO 50° C (14° F TO 122° F)

Temperature: Relave Humidity: 20% to 90% @ 30° C - Not condensing

Atmospheric Pressure: 45 to 115kPa

Weight Capacity: 350 lbs (158.75 kg) Subject to normal weight distribuon

Note: Do not sit on back of seat secon. This secon is not designed to support the full weight of paent.

Do not li or slide bench using back secon or seat upholstery.

Warning: Do not modify this equipment without authorizaon from Boyd Industries, Inc.

PBM-001

Rev 2

27.00

6.50

21.50

25.00

76.00

46.00

18.00

Product Specicaons

PB4000 & PB4001

About Your PEDO Bench (Connued)

Note: Headrest height is adjustable

approximately 6”. TOP VIEW

SIDE VIEW

PBM-001

Rev 2

Feature Operaon

About Your PEDO Bench (Connued)

Headrest: The headrest will adjust in and out to comfortably accommodate the paent.

Foot protector: The foot protector snaps on and o for ease of cleaning and replacement.

Backrest: Acvate the release lever on the boom of the back to posion the back secon.

Adjustment release lever is located on the

boom right side of the back secon.

Note: Drawer size, quanty of drawers and toe kick size can be customized per order upon

customer request and aect overall bench height.

Note: Refer to Delivery Unit Product Manual (DSM-

001) for handpiece instrumentaon package.

PBM-001

Rev 2

Drawer Removal/Installaon and Adjustment

About Your PEDO Bench (Connued)

Drawer Removal:

1Pull drawer all the way out.

2Press and hold release levers (2) on boom front of drawer and li drawer upward in front unl it is free from slider.

3Disconnue holding release levers.

4Pull drawer o back tabs of slider.

Drawer Installaon:

1Pull sliders (2) all the way out.

2Place drawer loosely on slider.

3Insert tabs on slider (2) into holes (2) on back wall of drawer and front locks should snap into posion.

4Close drawer

Adjustment Height:

Adjust the height of the drawer face by sliding the red tab located under the drawer in the release lever assembly. Push the tab to-

ward the rear of the drawer to raise the drawer face and toward the front of the drawer to lower drawer face.

Release Levers

Drawer Opened Li and Remove

Hole Locaon

Red Adjustment Tab

Tab Locaon

Slider

PBM-001

Rev 2

Installaon Procedure

Preassembly Check:

Open shipping cartons carefully and check to see that all parts are received and have not been damaged during shipping.

Unpacking PEDO Bench:

 Remove the plasc banding from the carton.

 Remove the carton top secon.

 Remove the carton side secons.

 Remove the Pedo Bench from the carton by removing the shipping cleats.

Note: Li the pedo bench to move it. Do not slide it or the laminate may get chipped. Do not set bench on any plumbing that

may be hanging from the bench while moving.

Unpacking Procedure

Head if Cabinet to cover in-oor

ulies where applicable

Compartment for water

bole at this end.

Installaon:

 Place the bench in desired posion. Place the head side of the cabinet over ulies where applicable.

 Secure the bench to the oor. There are two (2) angle brackets and two (2) anchors provided with the bench for securing

the bench to the oor. Access the brackets through an opening under the drawers.

 Use supplied #8 x 3/4” long screws to aach angle bracket to bench cabinet.

 Drill holes in oor cement using bracket for posion and vacuum holes to remove dust.

 Install anchors.

Cauon: Failure to anchor the cabinet will create a safety hazard allowing the Pedo Bench to p.

 See “CSU Manual” for delivery unit informaon and ulies.

Anchor

Screws

Angle Bracket

Long side up

Flat Washer

Open Area

Remove drawers

to access

Tools Required:

 Hammer Drill

 5/16 Carbide Masonry Bit

 #2 Phillips Screw Driver

 Vacuum

PBM-001

Rev 2

Light Post Installaon (Oponal)

The light post installs in the locaon shown below on either side of the bench for units manufactured aer

January 2012.

Call Boyd Industries for informaon on aaching a light post on units manufactured prior to this date.

Benches ordered with the light post opon will arrive with the T-nuts installed and holes cleared in the cabinet to

aach the light post in the locaon requested. Use the hardware provided to aach the post to the side of the

bench and adjust the leveler pad so that it touches the oor and helps to support the post.

Retrong an exisng bench:

All units manufactured aer January 2012 have the mount T-nuts installed on both sides for adding a light post at

any me. The holes are covered by the exterior laminate and will need to be opened up to allow for mounng.

Drill holes in the laminate with a 3/16” diameter drill bit from inside the cabinet using the exisng T-nut locaons

as a guide. Once located, clear the holes from the outside and aach light post as noted above.

Route the cord from the light thru the

Manuales populares de Equipo médico de otras marcas

TekTone

TekTone Tek-CARE160 Manual de usuario

NeuroMetrix

NeuroMetrix Quell 2.0 Manual de usuario

AMT

AMT XLR8 Manual de usuario

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Manual de usuario

EDAN

EDAN SONOTRAX Pro Manual de usuario

Restorative Therapies

Restorative Therapies RT300 Manual de usuario

Gendex

Gendex Expert DC Manual de usuario

Dexcowin

Dexcowin ADX4000W Manual de usuario

Libelium

Libelium MySignals Manual de usuario

Acelity

Acelity V.A.C.ULTA 4 Manual de usuario

Caputron

Caputron ActivaDose II tDCS Manual de usuario

FujiFilm

FujiFilm Sonart Manual del propietario

Plinth 2000

Plinth 2000 93CDT Manual de usuario

GE SENOGRAPHE 800T Manual de usuario

GE Definium 5000 Manual de usuario

Kanmed

Kanmed GE-1380 Manual de usuario

Huntleigh

Huntleigh FD1 Manual de usuario

Stryker

Stryker SPR Plus Manual de usuario