Boya Omic Manual de usuario
Ultracompact 2.4GHz
Dual-Channel Wireless
Microphone System
2.4GHz 迷你双通道
无线麦克风系统
Omic
Instruction Manual
使用说明
Statement
Please read this manual carefully before using and strictly operate and store
it in accordance with the instructions. Please save the manual for your future
reference. If you need further assistance than the user manual, please consult
your retailer for help or email us: sales@boya-mic.com
Cautions
1. Non-professional teardown is strictly prohibited.
2. Please keep it away from heat sources such as radiators or spotlights.
3. Do not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone
capsule cover.
01
General Introduction
The BOYA Omic is an ultra-compact and portable 2.4GHz wireless
microphone system, compatible with computers, Android mobile
devices and more. It features automatic pairing and selectable noise
cancellation, delivering broadcast-quality sound with remarkable ease of
use. The Omic is ideal for content creation, live streaming, vlogging, mobile
journalism and much more.
The USB-C receiver are device powered and have
USB-C charging ports, which support charging and powering of devices
while in use.
The included charging case allows you to charge the transmitter(s)
anywhere, making the Omic kit easy to carry on.
Features
• Also available in 48kHz HD audio when noise cancellation enabled
• Wide-range 20-20,000Hz frequency response - deliver exceptional
high-quality sound
• In-built rechargeable lithium-ion battery provides 5+ hoursofrecording
• USB-C digital output – universal compatibility with
computers and Android mobile devices
• Up to 60m wireless operating range
• Magnetic belt clip is detachable
• The charging case features wireless charging
02
Product Structure
Wireless Transmitter (Omic TX)
① In-built microphone
② Status indicator
Status Indicator
Unpaired
Blinking blue quickly
Paired successfully
Static blue
Mute Pulsing red
Noise cancellation
enabled
Static green
Low battery Static red
Charging Blinking red
Fully charged Red light o
③ Power button
• Press and hold to power on or o.
• Press to mute or unmute the
microphone.
• Press twice to enable or disable noise
cancellation.
④ Detachable magnetic belt clip
⑤ Charging contacts
03
1
2
35
4
USB-C Receiver (Omic RXU)
① USB-C connector
It can be connected to Android Smartphones,
Tablets, Computers and other USB-C devices.
② USB-C charging port
When the Omic RXU is plugged into an
external device, the external device can be
powered via this charging port.
NOTE: Most USB-C devices can be powered
and charged through this port while in use.
04
2
1
Charging Case (Omic CC)
①Slot for transmitter(s)
② Slot for receiver
③ Charging contacts
Status
Battery Level
Indicator
Low battery
＜10%
Charging
≤25%
26≤50%
51≤75%
76≤99%
Fully charged
100%
05
13 3 16
④ USB-C charging port
⑤Wireless charging sector
2
4
⑥ Charging indicator
5
How to use
1. The transmitter(s) will be turned on automatically as soon as it is taken out
of the charging case.
2. Plug the Omic RXU into a USB-C device.
3. Transmitter(s) and receiver will be automatically paired. The indicator of
the transmitter(s) is static blue.
4. Launch a video or audio recording app.
5. Select external microphone, if applicable (app dependent).
6. You are ready to record
Tips:
1. It is recommended to record a sample and play it back to check if the
audio level is acceptable before recording.
2. In order to improve the recording eect in a noisy environment, it is
recommended that press the power button on the transmitter(s) twice at
the same time to enable noise Cancellation.
3. After recording, put the transmitter(s) back into the case for charging.
Note:
Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try
to avoid obstacles, such as walls and buildings, and avoid close proximity to
devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.
06
07
Troubleshooting
If you encounter problems when using the unit, please refer to the following
checklist before contacting technical support. If the problem cannot be
solved, please contact the dealer's after-sales service department.
If there is no sound from the unit or no sound when connected to an
external device
①Make sure the connector on the receiver is well connected to your device.
②Make sure the transmitter(s) is not muted.
Current noise or other abnormal noise appears during monitoring
Make sure there is no interference near the unit. If the noise still exists after
changing the unit's position, please contact our customer service.
The operating range of the unit is limited and the sound is frequently intermittent
Make sure there is no interference between the transmitter(s) and receiver. If the
intermittent sound still occurs frequently, please contact our customer service.
Failed to charge the transmitter(s) via the charging case
①Make sure the charging contacts of both are in full contact. Wipe the
charging contacts with a clean cloth and try again.
②If you want to check whether the magnetic force is aging or whether
the charging contacts of the two are not in sucient contact, press
the transmitter(s) placed in the charging box to check whether it is in
a charging state. If the transmitter(s) is still failed to be charged, please
contact our customer service.
08
Specications
Omic TX Transmitter
Transmission Type 2.4GHz digital frequency
Modulation GFSK
Polar Pattern Omnidirectional
Antenna Ceramic antenna
Operating Range (Without Obstacle) Up to 50m
Distortion ≤0.1%
Frequency Response 20Hz-20kHz
Sampling Rate 48kHz
Bit Rate 16bit
Signal-to-Noise Ratio ≥80dB
Audio Input In-built microphone capsule
Battery Capacity 50mAh
Power Requirements In-built lithium-ion battery/Charging contacts
In-built Battery Life Approx. 5 hours
Charging Time Approx. 2 hours
Weight 15.5g
Dimensions 36×36×9.7mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C
Omic RXD/RXU Receiver
Transmission Type 2.4GHz digital frequency
Modulation GFSK
Polar Pattern Omnidirectional
Antenna Ceramic antenna
Operating Range (Without Obstacle) Up to 50m
Distortion ≤0.1%
Frequency Response 20Hz-20kHz
Reference Audio Input Level -30~-42dBV (MIC input, 0dB gain)
Sampling Rate 48kHz
Bit Rate 16bit
Signal-to-Noise Ratio ≥80dB
Audio Output USB-C digital output
Power Requirements Powered by an external device
Weight 6g
Dimensions 35.5×18.5×10 mm
Operating Temperature 0°C to +50°C
Storage Temperature -10°C to +50°C
09
Tabla de contenidos
Otros manuales de Sistema de micrófono de Boya
Boya
Boya BOYALINK Manual de usuario
Boya
Boya BY-M2 Manual de usuario
Boya
Boya BY-XM6 RXU Manual de usuario
Boya
Boya BY-HM2 Manual de usuario
Boya
Boya BY-WM6S Manual de usuario
Boya
Boya BOYALINK Manual de usuario
Boya
Boya BY-WM3D Manual de usuario
Boya
Boya BY-XM6-S1 Manual de usuario
Boya
Boya BY-M2D Manual de usuario
Boya
Boya BY-WM8 Pro Manual de usuario
Manuales populares de Sistema de micrófono de otras marcas
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manual de usuario
Alpha Technologies
Alpha Technologies RBMS Manual de usuario
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manual de usuario
Shure
Shure UA844 Manual de usuario
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manual de usuario
Pyle
Pyle PDWM5000 Manual de usuario