Bowflex SelectTect BDS1642 Manual de usuario

2-In-1 Stand

Assembly Instructions

Model: BDS1642





















































  



Complete Stand Component Diagram

Tools Required

7/32" Allen Wrench (included)

You will also need:

9/16" Socket

9/16" Wrench or Adjustable Wrench

Utility knife or scissors to cut nylon ties

Parts

# Qty. Description

1 1 TUBE, BOTTOM CROSS BRACE

2 1 ASSEMBLY, REAR LEFT STABILIZER

3 1 ASSEMBLY, REAR RIGHT STABILIZER

4 2 ASSY, STAND LEG

5 1 WELDMENT, LEFT DUMBBELL PLATFORM

6 1 WELDMENT, RIGHT DUMBBELL PLATFORM

7 1 WELDMENT, TOWEL BAR

8 1 FOOT PEGS, SET OF FOUR

9 1 HOLD DOWN STRAPS, 2F 2M

10 20 NUT-NL 0.375-16 G2-BlkZ

11 36 WASHER-FLAT 0.375 REGULAR BLKZ

12 8 SCREW-BHCS 0.375-16x3.0 G2-BlkO

13 4 SCREW-BHCS 0.375-16x2.75 G2-BlkO

14 4 SCREW-BHCS 0.375-16x2.5 G2-BlkO

15 4 SCREW-FHCS 0.375-16x1.0 G2-BlkO

16 1 WHEELS, CASTER SET OF FOUR

17 1 PLATE, CENTER W/ LOGO

2.5"

2.75"

3.0"

Flat Head

Button Head

Lock Nut Flat Washer

Button Head

Hardware

Qty

Hardware Card A:

2.75" Screw, Button Head 4

2.5" Screw, Button Head 4

1.0" Screw, Flat Head 4

Nut, Lock 12

Washer, Flat 20

Hardware Card B:

3.0" Screw, Button Head 8

Nut, Lock 8

Washer, Flat 16

7/32" Allen Wrench

step

Parts:

• Stand Leg (#4)

• Rear Left Stabilizer (#2)

Hardware Qty

• 3" Screws (#12) 2

• Washers (#11) 4

• Nuts (#10) 2

Tools:

• Hex Key (7/32”)

1-1 Attach the Rear Left Stabilizer (#2) to the Stand Leg (#4) using the hardware shown in Figure 1.

Note: Do not tighten hardware.

Figure 1











step

Figure 2

Parts:

• Stand Leg (#4)

• Rear Right Stabilizer (#3)

Hardware Qty

• 3" Screws (#12) 2

• Washers (#11) 4

• Nuts (#10) 2

Tools:

• Hex Key (7/32”)

2-1 Attach the Rear Right Stabilizer (#3) to the Stand Leg (#4) using the hardware shown in Figure 2.

Note: Do not tighten hardware.











Parts:

• Cross Brace (#1)

• Left Stand Leg assembly from Step 1

• Right Stand Leg assembly from Step 2

Hardware Qty

• 3" Screws (#12) 4

• Washers (#11) 8

• Nuts (#10) 4

Tools:

• Hex Key (7/32”)

3-1 Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)

using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace

(#1) is closer to the Stand Leg (#4) uprights.

Note: Do not tighten hardware.

step















Figure 3

step

Parts:

• Stand Leg and Cross Brace assembly from Step 3

• Center Plate (#17)

Hardware Qty

• 2.5" Screws (#14) 4

• Washers (#11) 8

• Nuts (#10) 4

Tools:

• Hex Key (7/32”)

• Wrench/Socket (9/16”) or Adjustable Wrench

4-1 Install the Center Plate (#17) to both Stand Legs (#4) using the hardware shown in Figure 4.

Note: Make sure that the Center Plate edges are on the outer sides of the legs, and that the logo

on the Plate is right side up.

4-2 Tighten all hardware from Steps 1, 2 and 3 securely.













Figure 4

step

Parts:

• Stand base assembly from Step 4

• Left Dumbbell Platform (#5)

Hardware Qty

• 2.75" Screws (#13) 2

• Washers (#11) 4

• Nuts (#10) 2

Tools:

• Hex Key (7/32”)

• Wrench/Socket (9/16”) or Adjustable Wrench

5-1 Secure the Left Dumbbell Platform (#5) to left Stand Leg (#4) using the hardware shown in

Figure 5.

Note: Make sure the screw holes in the Platform are toward the center of the stand.









Figure 5

step

Parts:

• Stand base assembly from Step 5

• Right Dumbbell Platform (#6)

Hardware Qty

• 2.75" Screws (#13) 2

• Washers (#11) 4

• Nuts (#10) 2

Tools:

• Hex Key (7/32”)

• Wrench/Socket (9/16”) or Adjustable Wrench

6-1 Secure the Right Dumbbell Platform (#6) to right Stand Leg (#4) using the hardware shown in

Figure 6.

Note: Make sure the screw holes in the Platform are toward the center of the stand.









Figure 6

step

Parts:

• Stand assembly from Step 6

• Towel Bar (#7)

Hardware Qty

• 1" Screws (#15) 4

• Washers (#11) 4

• Nuts (#10) 4

Tools:

• Hex Key (7/32”)

• Wrench/Socket (9/16”) or Adjustable Wrench

7-1 Attach the Towel Bar (#7) to the Left Dumbbell Platform (#5) and the Right Dumbbell Platform

(#6) using hardware shown in Figure 7. Hand tighten screws in a cross pattern, to ensure

even ﬁt.

7-2 Tighten all screws securely.



 



 



Figure 7

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de fitness de Bowflex

Bowflex

Bowflex SelectTech BD552i Manual de usuario

Bowflex

Bowflex SelectTech 3.1 Bench Manual de usuario

Bowflex

Bowflex MAX Trainer M9 Instrucciones de instalación y funcionamiento

Bowflex

Bowflex Ultimate 2 Accessory Pack Manual de usuario

Bowflex

Bowflex Power-Pak Instrucciones de instalación y funcionamiento

Bowflex

Bowflex TREADCLIMBER 1000 Manual de usuario

Bowflex

Bowflex Max Trainer M7 Manual de usuario

Bowflex

Bowflex Max Trainer M6 Manual de usuario

Bowflex

Bowflex Revolution XP Lat Tower Manual de usuario

Bowflex

Bowflex BXE216 Instrucciones de instalación y funcionamiento

Bowflex

Bowflex BXE326 Manual de usuario

Bowflex

Bowflex TREADCLIMBER 3000 Manual de usuario

Bowflex

Bowflex TREADCLIMBER 1000 Manual de usuario

Bowflex

Bowflex Max Total 16/40 Manual de usuario

Bowflex

Bowflex SelectTech BF1090 Manual de usuario

Bowflex

Bowflex 5.1S Manual de usuario

Bowflex

Bowflex SelectTech BD1090 Manual de usuario

Bowflex

Bowflex Max Trainer SE Manual de usuario

Bowflex

Bowflex Max Trainer M8 Manual de usuario

Bowflex

Bowflex 1090i Manual de usuario

Bowflex

Bowflex SelectTech 2080 Instrucciones de instalación y funcionamiento

Bowflex

Bowflex BodyTower Manual de usuario

Bowflex

Bowflex JRNY Guía de instalación

Bowflex

Bowflex Bowflex 5.1S Manual de usuario

Manuales populares de Equipo de fitness de otras marcas

NSD

NSD PB-188P Manual de usuario

Performance

Performance HyperVibe Manual de usuario

Scalamobil

Scalamobil S27 Manual de usuario

Precor

Precor Experience Series Manual de usuario

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manual de usuario

Taurus

Taurus TF-RK1312 Manual de usuario

Nustep

Nustep T5 Manual de usuario

Precor

Precor CW-507 Manual de usuario

Movement

Movement BICEPS Idea Manual de usuario

Kegel8

Kegel8 V For Men Manual de usuario

Skandika

Skandika Styrke II Manual de usuario

BLK BOX

BLK BOX 21-0122-0B Manual de usuario

Stamina

Stamina aeropilates premier 299 Manual de usuario

SPORTSTECH

SPORTSTECH PBX300 Manual de usuario

ParaBody

ParaBody Serious Steel 877102 Manual de usuario

Weslo

Weslo Gym 650 Manual de usuario

Rebel

Rebel ACTIVE RBA-1011 Manual de usuario

4iiii

4iiii FLiiiight Manual de usuario