Boser HS-6252 Manual de usuario

HS-6252

VIA C3 800MHz Embedded CPU

Industrial Single Board Computer

•Half Size•All-in-One•CRT•133MHz FSB•

•ATA/33/66/100•Dual LAN•Audio•

•RS-232/422/485•4COM•PC/104•

•IrDA•USB•DOC•WDT•H/W Monitor•

•PCI-ISA Bus Industrial Single Board computer•

The accuracy of contents in this manual has passed thorough checking and review

before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is

not liable for any infringements of patents or other rights resulting from its use. The

manufacturer will not be responsible for any direct, indirect, special,

incidental or consequential damages arising from the use of this product or

documentation, even if advised of the possibility of such damage(s).

This manual is copyrighted and BOSER Technology Co., Ltd. reserves all

documentation rights. Unauthorized reproduction, transmission, translation,

and storage of any form and means (i.e., electronic, mechanical, photocopying,

recording) of this document, in whole or partly, is prohibited, unless granted

permission by BOSER Technology Co., Ltd.

BOSER Technology Co., Ltd. reserves the right to change or improve the

contents of this document without due notice. BOSER Technology Co., Ltd.

assumes no responsibility for any errors or omissions that may appear in this

manual, nor does it make any commitment to update the information contained

herein.

BOSER is a registered trademark of BOSER Technology Co., Ltd.

ISB is a registered trademark of BOSER Technology Co., Ltd.

Intel is a registered trademark of Intel Corporation.

AMI is a registered trademark of AMI Software, Inc.

All other trademarks, products and or product names mentioned herein are

mentioned for identification purposes only, and may be trademarks and/or

registered trademarks of their respective companies or owners.

Edition 1.3, December 27, 2002

Table of Contents

Chapter 1 General Description ..................................1

1.1 Major Features....................................................................... 2

1.2 Specifications ........................................................................ 3

1.3 Board Dimensions................................................................. 4

Chapter 2 Unpacking ..................................................5

2.1 Opening the Delivery Package............................................. 5

2.2 Inspection............................................................................... 5

Chapter 3 Hardware Installation ..............................7

3.1 Before Installation ................................................................. 7

3.2 Board Layout ......................................................................... 8

3.3 Jumper List ............................................................................ 9

3.4 Connector List ....................................................................... 9

3.5 Configuring the CPU ........................................................... 10

3.6 System Memory ................................................................... 10

3.7 DiskOnChipAddress Setting .......................................... 10

3.8 VGA Controller .................................................................... 12

3.9 PCI E-IDE Drive Connector................................................. 13

3.10 Floppy Disk Drive Connector ............................................. 14

3.11 Serial Port Connectors ....................................................... 15

3.12 Parallel Connector............................................................... 16

3.13 Ethernet Connector............................................................. 16

3.14 IrDA Connector .................................................................... 17

3.15 USB Connector .................................................................... 17

3.16 CMOS Data Clear................................................................. 17

3.17 Power, ATX Power Controller and Fan Connectors ........ 18

3.18 Keyboard Connectors......................................................... 22

3.19 PS/2 Mouse Connector ....................................................... 23

3.20 System Front Panel Connectors........................................ 24

3.21 Thermal Input Connector.................................................... 24

3.22 Watchdog Timer .................................................................. 25

3.23 PC/104 Connectors ............................................................. 27

3.24 Audio Connectors ............................................................... 29

Chapter 4 AMI BIOS Setup .....................................31

4.1 Starting Setup ...................................................................... 31

4.2 Using Setup.......................................................................... 32

4.3 Main Menu ............................................................................ 33

4.4 Standard CMOS Setup ........................................................ 35

4.5 Advanced CMOS Setup ...................................................... 38

4.6 Advanced Chipset Setup .................................................... 41

4.7 Power Management Setup ................................................. 42

4.8 PCI / Plug and Play Setup................................................... 44

4.9 Peripheral Setup.................................................................. 45

4.10 Hardware Monitor Setup..................................................... 47

4.11 Auto-Detect Hard Disks ...................................................... 48

4.12 Change Supervisor/User Password .................................. 49

4.13 Auto Configuration with Optimal Settings ....................... 50

4.14 Auto Configuration with Fail Safe Settings ...................... 51

4.15 Save Settings and Exit........................................................ 52

4.16 Exit Without Saving............................................................. 53

Chapter 5 Software Utilities.....................................55

5.1 IDE and Audio Driver Installation ...................................... 55

5.2 LAN Driver Installation for WIN95 & WIN98 ...................... 68

5.3 LAN Driver Installation for WIN NT4.0............................... 74

Safety Instructions

Integrated circuits on computer boards are sensitive to static electricity.

To avoid damaging chips from electrostatic discharge, observe the

following precautions:

 Do not remove boards or integrated circuits from their anti-static

packaging until you are ready to install them.

 Before handling a board or integrated circuit, touch an unpainted portion

of the system unit chassis for a few seconds. This helps to discharge any

static electricity on your body.

 Wear a wrist-grounding strap, available from most electronic component

stores, when handling boards and components. Fasten the ALLIGATOR

clip of the strap to the end of the shielded wire lead from a grounded

object. Please wear and connect the strap before handle the HS-6252 to

ensure harmlessly discharge any static electricity through the strap.

 Please use an anti-static pad when putting down any components or

parts or tools outside the computer. You may also use an anti-static bag

instead of the pad. Please inquire from your local supplier for additional

assistance in finding the necessary anti-static gadgets.

NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE

COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC

PROTECTION

This page intentionally left blank.

Chapter 1

General Description

The HS-6252 is a 133MHz FSB VIA VT8601 chipset-based board

designed for PCI-ISA Bus with VIA C3 800MHz Embedded CPU.

These features combine and make the HS-6252 an ideal all-in-one

industrial single board computer. Additional features include an

enhanced I/O with CRT, Dual LAN, and 4 COM ports interface.

Its onboard ATA/33/66/100 to IDE drive interface architecture allows

the HS-6252 to support data transfers of 33, 66 or 100MB/sec. to each

IDE drive connection. Designed with the VIA VT8601 core logic

chipset, the board supports VIA C3 800MHz Embedded CPU. The VIA

VT8601 integrated Trident 3D supporting AGP Bus.

For suitable installation into any size system with 8/16/32-bit ISA and/or

PCI slots operation, the board’s advanced PCI-ISA bus add-on feature

allows user to easily obtain both ISA's 16-bit and PCI's 32-bit full set

signals from a half-size PCI-ISA slot. System memory is also sufficient

with the two DIMM sockets that can support up to 1GB.

Additional onboard connectors include an advanced USB and IrDA

ports providing faster data transmission, a DOS-compatible

DiskOnChipsocket with a maximum capacity of 288MB, and two

external RJ-45 connectors for 10/100 Based Ethernet use.

To ensure the reliability in an unmanned or standalone system, the

Watchdog Timer (WDT) onboard HS-6252 is designed with pure

hardware that does not need the arithmetical functions of a real-time

clock chip. If any program causes unexpected halts to the system, the

onboard Watchdog Timer (WDT) will automatically reset the CPU or

generate an interrupt to resolve such condition.

1.1 Major Features

The HS-6252 comes with the following features:

 VIA C3 800MHz Embedded CPU

 VIA VT8601/VT82C686B system chipset

 Supports 66/100/133MHz FSB

 Two DIMM sockets with a max. capacity of 1GB

 SMC 37C669, VIA VT82C686B super I/O chipset

 Fast PCI ATA/33/66/100 IDE controller

 Three RS-232 and one RS-232/422/485 serial ports

 PC/104 Bus connector

 VIA VT8601 CRT display controller

 Dual RealTek RTL8100 10/100 Based LAN

 AC97 3D audio controller

 DiskOnChipsocket supporting memory sizes of up to 288MB

 Supports four USB connectors

 Supports Hardware Monitor function

 Supports Single +5V power in

1.2 Specifications



CPU: VIA C3 800MHz embedded CPU



Bus Interface: PCI-ISA Bus



Memory: Two DIMM sockets supporting up to 1GB



Chipset: VIA VT8601/VT82C686B



I/O Chipset: SMC 37C669, VIA VT82C686B



VGA: VIA VT8601 integrated Trident 3D supporting AGP Bus



IDE: Two IDE disk drives supporting ATA/33/66/100 and with transfer

rates up to 33/66/100MB/sec.

 FDD: Supports up to two floppy disk drives

 Parallel: One enhanced bi-directional parallel port supporting

SPP/ECP/EPP



LAN: Dual RealTek RTL8100 10/100 Based LAN



Audio: AC97 3D audio controller supporting speaker out



Serial Port: 16C550 UART-compatible RS-232/422/485 x 1 and RS-232

x 3 serial ports with 16-byte FIFO

 PC/104: PC/104 connector for 16-bit ISA Bus

 IrDA: One IrDA TX/RX header

 USB: Four USB connectors



Keyboard: PS/2 6-pin Mini DIN or 5-pin connector



Mouse: PS/2 6-pin Mini DIN or 4-pin connector



DiskOnChip:DiskOnChipsocket supporting memory sizes of up to

288MB



BIOS: AMI PnP Flash BIOS



Watchdog Timer: Sets 1, 2, 10, 20, 110, 220 seconds, activity trigger

with Reset or NMI



CMOS: Battery backup



DMA Channels: 7



Interrupt Levels: 15



Operating Temperature: 0~60°C



Hardware Monitor: VIA VT82C686B



Board Size: 18.5 x 12.2 cm

1.3 Board Dimensions

Tabla de contenidos

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario

Lanner electronics

Lanner electronics IAC-F847 Series Manual de usuario