BOSER Technology Transmeta Crusoe HS-1600 Manual de usuario
HS-1600
Transmeta Crusoe Mini Board
•Crusoe CPU•CRT/Panel•SODIMM•DiskOnChip•
•LAN•4COM•Mini PCI•IrDA•USB•Sound•Single +5V•
•Transmeta Embedded Industrial Single Board Computer•
Copyrights
Unauthorizedcopying,photocopying,translation,orreproduction of this manual to
any electronic or machine readable form in whole or in part without prior written
consent from the manufacturer is prohibited.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
Themanufacturerreservestherightstochangethecontentsofthismanualwithout
prior notice in order to improve the function design, performance, quality and
reliability of the product. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award International Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2001
All Rights Reserved.
User’s Manual edition1.1,Aug.24 2001
Contents?i
Contents
HS-1600...................................................................................................................1
GENERAL INFORMATION.........................................................................................3
1.1 MAJOR FEATURES..................................................................................................4
1.2 SPECIFICATIONS ......................................................................................................5
1.3 DELIVERY PACKAGE..............................................................................................6
HARDWARE INSTALLATION...................................................................................7
2.1 CAUTION OF STATIC ELECTRICITY........................................................................7
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION......................................8
2.3 HS-1600’S LAYOUT..............................................................................................9
2.4 QUICK LISTING OF JUMPERS AND CONNECTORS ...............................................10
2.5 JUMPER SETTING DESCRIPTION............................................................................11
2.6 CMOS CLEAN......................................................................................................12
2.7 SYSTEM MEMORY DRAM...................................................................................12
2.8 SETTING THE FLAT PANEL VOLTAGE.................................................................13
2.9 DISKONCHIP..........................................................................................................13
2.10 WATCH DOG TIMER............................................................................................13
CONNECTION..............................................................................................................14
3.1 POWER AND FAN CONNECTORS .......................................................................14
3.2 RESET BUTTON.....................................................................................................15
3.3 AUDIO SETTING.....................................................................................................15
3.4 PCI E-IDE DRIVE CONNECTOR..........................................................................16
3.5PARALLEL PORT CONNECTOR............................................................................17
3.6 THE FLOPPY DISK DRIVE CONNECTOR...............................................................18
3.7 SERIAL PORTS CONNECTORS.............................................................................19
3.8 KEYBOARD/MOUSE CONNECTORS.....................................................................21
3.9 VGA CRT AND LCD CONNECTORS..................................................................22
3.10 IR CONNECTOR...................................................................................................24
3.11 USB PORTS CONNECTOR................................................................................25
3.12 LAN INTERFACE CONNECTOR...........................................................................25
3.13 MINI PCI CONNECTOR.......................................................................................26
ii ?Contents
AWARD BIOS SETUP...............................................................................................28
4.1 MAIN MENU...........................................................................................................29
4.2 STANDARD CMOS SETUP..................................................................................30
4.3 ADVANCED BIOS FEATURES .............................................................................31
4.4 INTEGRATED PERIPHERALS..................................................................................32
4.5 POWER MANAGEMENT SETUP............................................................................34
4.6 PNP/PCI CONFIGURATION SETUP.....................................................................35
SOFTWARE UTILITIES............................................................................................36
5.1 VGA DRIVER INSTALL FOR WIN98...................................................................37
5.2 VGA DRIVER INSTALL FOR WIN NT4.0...........................................................39
5.3 NETWORK DRIVER INSTALL FOR WIN98...........................................................49
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0...................................................47
5.5 SOUND DRIVER INSTALL FOR WIN98................................................................55
5.6 SOUND DRIVER INSTALL FOR WIN NT4.0........................................................59
3
Chapter-1
General Information
The HS-1600 is a 66MHz Bus,Via VT86C686 chipset based Mini
Embedded SBC with combined features to make it an ideal all-in-one
industrial single board computer with enhanced I/O effects, LAN and VGA
interface.
With on board DMA33 IDE drive interface architecture, the HS-1600
supports a maximum of 33MB/sec data transfer rate with one IDE drive
connection. The 69000 CRT/Panel display controller provides a resolution
of up to 1280x1024, 256 colors. The SBC also provides one internal 40-pin
connector for use with various types of the LCD Panel connection.
The HS-1600 providesone SODIMM socket that supports up to256MB of
mainsystemmemory. AsingleFlash chip holds the system BIOS, and you
can easily update the Flash BIOS by the Utility Update software. Advanced
USB and IrDA ports are also provided for faster and convenient data
transmission.
The HS-1600 also features one Realtek RTL8139 100 Based Ethernet
controller and the ESS Solo1 3D Sound chip on board.
4
1.1 Major Features
?? Transmeta Crusoe TM3200 400MHz or TM5400 600MHz CPU
?? Via VT82C686A Chipset
?? One SODIMM socket supports up to 256MB
?? Mini PCI Local Bus support
?? Three RS-232 and one RS-232/422/485 serial ports include 16C550
UART with 16byte FIFO
?? One enhanced bi-directional parallel port support SPP/ECP/EPP
?? On board two USB ports and one IrDA port
?? On board SMC 37C669
?? On board 69000 CRT/Panel display controller
?? On board Realtek RTL8139 100 Based LAN
?? On board ESS Solo1 3D Sound
?? Single +5V support
?? Provides socket for DiskOnChipTM
?? Watchdog Timer Function support
?? On board PS/2 Keyboard/Mouse connector
5
1.2 Specifications
??CPU: Transmeta Crusoe TM3200 400MHz / TM5400 600MHz CPU
??Bus Interface: Mini PCI Local Bus
??Memory: One SODIMM socket provides up to 256MB
??Chipset: Via VT82C686
??Data Bus: 64bit
??VGA: 69000 with 2MB memory support CRT/Panel display up to
1280x1024x256 colors
??IDE: Two IDE disk drives support DMA33 transfer rate up to 33MB/sec
??Floppy: Support up to one floppy disk drives
??Parallel Port: Support SPP/ECP/EPP
??LAN: Realtek RTL8139C 100 Based LAN
??Sound: ESS Solo1 3D Sound
??Serial Port: Three RS-232 and one RS-232/422/485 serial ports
include 16C550 UART with 16byte FIFO
??IR: One IrDA TX/RX header
??USB: Support two USB ports
??Keyboard/Mouse: 6-pin SMD type connector
??DiskOnChip: Socket for DiskOnChip and memory size up to 144MB
??BIOS: Award Y2K PnP Flash BIOS
??DMA Channels: 7
??Interrupt: 15
??Main Power: Single +5V Power In
??Maximum Power Consumption: [email protected] (TM3200 400MHz)
6
??Operating Temperature: 0~60℃
??Board Size: 11.25x10.2 cm
1.3 Delivery Package
The delivery package of HS-1600 includes the following items:
?? One HS-1600 Industrial Single Board
?? One Printer Ports Flat Cable
?? One COM port Flat Cable
?? One IDE port Flat Cable
?? One FDD port Flat Cable
?? One PS/2 Keyboard/Mouse Transfer Cable
?? One Panel connector Flat Cable
?? One 2-pin Power Transfer Cable
?? One RJ45 Transfer Cable
?? One Audio Port Transfer Cable
?? One 15-pin VGA Transfer Cable
?? Utility Diskette
?? User’s Manual
Please contact your dealer if any of the items are missing or
damaged. Please store all parts of the delivery package with packing
materials in case you want to ship or store the product in the future.
7
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
HS-1600. First, proceed with sections 1.3, 2.1 and 2.2 to check the
delivery package and for unpacking. Afterwards, go to the jumpers
setting section.
2.1 Caution of Static Electricity
The HS-1600 has been well packaged with an anti-static bag to
protect the sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps below to protect the board in against
static electric discharge whenever you handle the board:
1. Use a grounding wrist strap to handle the HS-1600. Well clip the
ALLIGATOR clip of the strap to the end of the shielded wire lead
from a grounded object. Put on and connect the strap before
handling the HS-1600 to harmlessly discharge any static electricity
through the strap.
2. Use an anti-static pad to put any components or parts or tools on
the pad whenever you work on them outside the computer. You may
also use the anti-static bag instead the pad. Please ask your local
supplier to help up get the any anti-static requirement that you may
need.
8
2.2 Caution on Unpacking and Before Installation
First, proceed with the steps in section 2.1 to protect the HS-1600
from electricity discharge. Refer to section 1.3 in checking the delivery
package again with the following steps:
1.Unpack the HS-1600, store all packing material, manual and any
diskette.
2.Is there any component missing or loosen from the board? DO NOT
INSTALL IF THIS HAPPENS.
3.Is there any visual damage on the board? DO NOT INSTALL IF THIS
HAPPENS.
4.Carefully check the optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) and complete setting all necessary jumpers,
jumper pin-set and CMOS setup correctly. Please also refer to all
information on jumpers setting in this manual.
5.Carefully check all external devices (i.e. Add-On-Card, Driver Type
etc.) to complete the add-in or connection and CMOS setup
correctly. Please also refer to all information on the connector
connections in this manual.
6.Please keep all necessary manual and diskette in a good condition
for your necessary re-installation if you change your Operating
System or whatever needs.
Tabla de contenidos
Otros manuales de Computadora de placa única de BOSER Technology
Manuales populares de Computadora de placa única de otras marcas
WIN Enterprises
WIN Enterprises PL-80910 Manual de usuario
AXIOMTEK
AXIOMTEK SBC81206 Series Manual de usuario
Embest
Embest SOM-PH8800 Manual de usuario
SeaLevel
SeaLevel SBC-R9 Manual de usuario
SMART Embedded Computing
SMART Embedded Computing ATCA-8310 Manual de usuario
WinSystems
WinSystems PPM-LX800-G Manual de usuario
GIGAIPC
GIGAIPC QBiX-PPC Series Manual de usuario
OLIMEX
OLIMEX A10S-OLinuXino-MICRO Manual de usuario
Commell
Commell FS-978 Manual de usuario
GIGAIPC
GIGAIPC QBiP-8665A/ Manual de usuario
VersaLogic
VersaLogic Python EBX-11 Manual de usuario
Micro Computer Specialists
Micro Computer Specialists IRV-3702 Manual de usuario
