Bose Music Amplifier Manual de usuario
BOSE MUSIC AMPLIFIER
13
|
ENG
CONTENTS
Confirm that the following parts are included:
Bose Music Amplifier Power cord*
Rack screws for rack mounting (3) Connecting screws for rack mounting (3)
RACK MOUNT
FRONT
WALL MOUNT
UP
RACK MOUNT
FRONT
WALL MOUNT
UP
Mounting bracket Rack bracket
* May ship with multiple power cords. Use the power cord for your region.
NOTE: If part of the amplifier is damaged, don’t use it. Contact your authorized Bose
dealer or Bose customer service.
Visit: support.Bose.com/BMAsupport.Bose.com/BMA
WHAT’S IN THE BOX
14
|
ENG
AMPLIFIER PLACEMENT
RECOMMENDATIONS
• Install the amplifier indoors.
• Make sure there is an AC (mains) outlet nearby.
• To avoid interference, keep other wireless equipment 1 – 3 ft (0.3 – 0.9 m) away
from the amplifier.
• For optimum performance, place the amplifier in a well-ventilated area.
• Place the amplifier on a shelf, or mount it on a rack or wall.
• When mounting on a rack, make sure the rack mount arrow and four tabs are
facing the front of the rack (see page 55).
• When mounting multiple amplifiers on a rack, use a separate rack mount for
each amplifier.
• When mounting on a wall, make sure the wall mount arrow and four tabs are
facing up (see page 57).
CAUTIONS:
• Place the amplifier in an area where the maximum ambient temperature is less than
104°F (40°C).
• Keep the back side of the amplifier at least 3 – 6 in (7.62 – 15.24 cm) away from any
other surface. Do not block airflow from the back of the amplifier.
• Do NOT place the amplifier in a completely enclosed area. Doing so may result in
poor performance.
3 - 6"
7.62 - 15.24 cm
3 - 6"
7.62 - 15.24 cm
15
|
ENG
SPEAKER CONNECTION GUIDELINES
• One pair of speakers requires 4 ohm minimum each.
• Two pairs of speakers require 8 ohm minimum each.
CAUTION: Use only unpowered speakers. Do NOT connect any make or model of
powered speakers. Doing so may cause damage to the equipment.
SPEAKER WIRE LENGTH RECOMMENDATIONS
MAXIMUM LENGTH GAUGE
30 ft (9 m) 18 (0.82 mm2)
45 ft (14 m) 16 (1.3 mm2)
70 ft (21 m) 14 (2.0 mm2)
16
|
ENG
CONNECT SPEAKERS
Before connecting your speakers, place your speakers in their permanent location and
make sure the amplifier is unplugged from an AC (mains) power outlet.
Speaker wires consist of two insulated wires:
• The marked wire (stripes, ribbing, or color) connects to the positive (+) terminal.
• The plain wire connects to the negative (–) terminal.
1. Remove terminal block A from the SPEAKERS OUT port.
L L R R
L L R R
L L R R
2. Connect the speaker wires to terminal block A.
a. Insert the left speaker’s marked wire into the L + positive terminal and the
plain wire into the L - negative terminal.
b. Insert the right speaker’s marked wire into the R + positive terminal and the
plain wire into the R - negative terminal.
L L R R
17
|
ENG
CONNECT SPEAKERS
3. Using a small, flat-head screwdriver, tighten the screws on the terminals clockwise
to secure the wires.
L L R R
4. Reinsert terminal block A into the SPEAKERS OUT port.
L L R R
L L R R
L L R R
5. Connect the other end of the speaker wires to your speakers.
For instructions, refer to the online owner’s guide for your speaker.
NOTE: Use a silicone caulking material such as RTV adhesive (available at
your local hardware store) to protect the wiring at any outdoor
speaker connections.
18
|
ENG
CONNECT SPEAKERS
Connect additional speakers
You can connect up to two pairs of speakers to the amplifier for fuller sound.
To connect a second pair of speakers, repeat steps in “Connect Speakers” on page
16, using terminal block B.
L L R R
L L R R
L R R
NOTE: For best sound quality and balanced volume, when connecting two pairs of
speakers, they should be the same speaker model since the same EQ setting
will be applied to both pairs of speakers.
19
|
ENG
POWER
CONNECT THE AMPLIFIER TO POWER
1. Connect the power cord to the POWER port on the back of the amplifier.
2. Plug the other end of the power cord into an AC (mains) power outlet.
The light on the back of the amplifier slowly blinks amber.
NOTES:
• If the amplifier has been set up and is set to Main (default), the light on the back
of the amplifier glows solid white.
• If the amplifier has been set up and is set to Supplemental, the light on the back
of the amplifier glows solid green.
NETWORK STANDBY
The amplifier transitions to network standby when audio has stopped and you have
not pressed any buttons for 20 minutes. To wake the amplifier from network standby,
play or resume audio using the Bose Music app on your mobile device or reconnect a
Bluetooth source.
20
|
ENG
BOSE MUSIC APP SETUP
The Bose Music app lets you set up and control the Main amplifier (see page 22)
from any mobile device, such as a smartphone or tablet.
Using the app, you can stream music, add music services, explore internet radio
stations, set and change presets, work with your voice assistant, manage Main
amplifier settings, and get updates and new features.
NOTE: If you have already created a Bose Music account for another Bose product,
add the amplifier to your existing account (see page 21).
DOWNLOAD THE BOSE MUSIC APP
1. On your mobile device, download the Bose Music app.
BOSE MUSIC
2. Follow the app instructions to set up the amplifier.
21
|
ENG
EXISTING BOSE MUSIC APP USERS
ADD THE MAIN AMPLIFIER TO AN EXISTING ACCOUNT
To add your Bose Music Amplifier, open the Bose Music app and add your amplifier.
NOTES:
• You can only add a Main amplifier using the Bose Music app. Supplemental
amplifiers don’t display on your network or in the Bose Music app.
• To play the same audio on multiple speakers simultaneously, you can group Main
amplifiers together using the Bose Music app. You can access this option from the
main page. For more information, visit: support.Bose.com/BMAGroupingsupport.Bose.com/BMAGrouping
CONNECT TO A DIFFERENT WI-FI NETWORK
Connect to a dierent network if your network name or password has changed, or if
you want to change or add another network.
1. Press and hold the Reset button for 5 seconds until the light on the back of the
amplifier slowly blinks amber.
2. On your mobile device, open your Wi-Fi settings.
3. Select Bose Music Amplifier.
4. Open the Bose Music app and follow the app instructions.
Tabla de contenidos
Otros manuales de Amplificador de Bose
Bose
Bose 1800-VI Manual
Bose
Bose 1800-VI Manual de usuario
Bose
Bose FreeSpace IZA 190-HZ Guía de instalación
Bose
Bose 2150 Manual de usuario
Bose
Bose Lifestyle SA-2 Manual de usuario
Bose
Bose B1500 Manual de usuario
Bose
Bose FreeSpace IZA 190-HZ Guía de instalación
Bose
Bose FreeSpace IZA 2120-LZ Instrucciones de funcionamiento
Bose
Bose AM262840 Manual de usuario
Bose
Bose Lifestyle SA-2 Manual de usuario
Bose
Bose SoundTouch SA-4 Manual de usuario
Bose
Bose PackLite A1 Manual de usuario
Bose
Bose FreeSpace E4 Series II Manual de usuario
Bose
Bose BUILT-INvisible TA-1 Manual de usuario
Bose
Bose PM4500 Manual de instrucciones
Bose
Bose FREESPACE BMA-125 Manual de usuario
Bose
Bose 1801 Manual de usuario
Bose
Bose FreeSpace DXA 2120 Manual de usuario
Bose
Bose FreeSpace E-4 Manual de usuario
Bose
Bose SoundTouch SA-5 Manual de usuario
