Bosch Professional Series Manual de usuario

Professional Series TriTech AM Motion

Detectors with Anti‑mask, LSN

en Reference Manual

Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN Table of contents | en 3

Bosch Building Technologies Reference Manual 2018.10 | 01 | F.01U.352.414

Table of contents

1Safety 4

2Introduction 5

2.1 About documentation 5

2.2 Bosch Security Systems, Inc. product manufacturing dates 5

3Detector overview 6

4Installation considerations 7

5Installation 9

5.1 Self-locking cam 9

5.2 Install options 10

5.3 Wire knockouts 13

5.4 Bubble level 14

6Wiring 16

7Look-down and walk test 17

7.1 Look-down zone 17

7.2 Walk test LED 17

8Configuration 19

8.1 Classic/LSNi mode 19

8.1.1 Classic mode 19

8.1.2 LSNi mode 20

8.2 Detection range 20

8.3 Anti-mask 21

8.4 Walk test 23

8.4.1 Establish the PIR and microwave doppler radar coverage 23

8.4.2 Establish the coverage pattern 24

8.4.3 Adjustable microwave doppler radar sensitivity 24

8.5 Self test 25

9Troubleshooting 26

9.1 Detector does not appear to respond to motion 26

9.2 Detector is in continuous alarm 26

9.3 Detector appears normal but does not send alarms to the control panel 26

9.4 Detector does not appear to detect motion in the space directly under it 26

9.5 Detector does not appear to detect motion in farthest coverage area 26

9.6 Detector LED flashes continuously 26

9.7 Detector LED flashes three times in a row repeatedly 27

9.8 Detector LED flashes four times in a row repeatedly 27

9.9 Detector LED flashes five times in a row repeatedly 27

9.10 Detector does not detect motion near the edge of the coverage area 27

10 Appendix 28

4en | Safety Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN

2018.10 | 01 | F.01U.352.414 Reference Manual Bosch Building Technologies

1 Safety

Changes or modifications not expressly approved by Bosch Security Systems, Inc. can void the

user’s authority to operate the equipment.

At least once per year, vary the range and coverage. To ensure continual daily operation,

instruct the end user to walk through the far end of the coverage pattern. This ensures an

alarm output prior to arming the system.

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable must be collected separately and

sent for environmentally compatible recycling (in accordance with the European Waste

Electrical and Electronic Equipment Directive).

To dispose of old electrical or electronic devices, you should use the return and collection

systems put in place in the country concerned.

ROHS

For use in China: CHINA ROHS DISCLOSURE TABLE

Sensors

Hazardous substance table according to SJ/T 11364-2014

(Pb)

(Hg)

(Cd)

Cr 6+

(Cr 6+)

PBB

(PBB)

PBDE

(PBDE)

PCB X O O O O O

Electronic components X O X X O O

PCBA X O X O X X

Cables X O X O X X

Plastic materials O O O O X X

Metal materials X O X X O O

Glass material (lenses) X O O O O O

Terminal block X O X X O O

This table was created according to the provisions of SJ/T 11364

O: The content of such hazardous substance in all homogeneous materials of such

component is below the limit defined in GB/T 26572

X: The content of such hazardous substance in a certain homogeneous material is above the

limit defined in GB/T 26572

The manufacturing datecodes of the products are explained in:

http://www.boschsecurity.com/datecodes/

Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN Introduction | en 5

Bosch Building Technologies Reference Manual 2018.10 | 01 | F.01U.352.414

2 Introduction

This document provides install-related information for Professional Series LSN detectors.

2.1 About documentation

This document is the intellectual property of Bosch Security Systems, Inc. and is protected by

Trademarks

All hardware and software product names used in this document are likely to be registered

trademarks and must be treated accordingly.

Notifications

This document uses Notices, Cautions, and Warnings to draw your attention to important

information.

Notice!

These include important notes for successful operation and programming of equipment, or

indicate a risk of damage to the equipment or environment.

Caution!

These indicate a hazardous situation which, if not avoided, could result in minor or moderate

injury.

Warning!

These indicate a hazardous situation which, if not avoided, could result in death or serious

injury.

2.2 Bosch Security Systems, Inc. product manufacturing dates

Use the serial number located on the product label and refer to the Bosch Security Systems,

Inc. website at http://www.boschsecurity.com/datecodes/.

The following image shows an example of a product label and highlights where to find the

manufacturing date within the serial number.

6en | Detector overview Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN

2018.10 | 01 | F.01U.352.414 Reference Manual Bosch Building Technologies

3 Detector overview

LSNi

XX X

Callout — Description Callout — Description

1 — Terminal block 6 — LSN address switches

2 — Wall Tamper 7 — LSN address 1 switch (not used)*

3 — Removable bubble level 8 — LSN address 2 switch (not used)*

4 — Self-locking cam lock 9 — Look-down zone On/Off switch*

5 — Microwave Doppler radar range

adjustment

*T-tapping is not supported by the bus.

Notice!

Location and number of features and configuration switches varies by model.

Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN Installation considerations | en 7

Bosch Building Technologies Reference Manual 2018.10 | 01 | F.01U.352.414

4 Installation considerations

When installing the detector, observe the following installation considerations.

Notice!

Bracket use

Using a mounting bracket might reduce catch performance, range, as well as increase false

alarms. Reduced catch performance might invalidate regulatory certification on the

installation. The use of mounting brackets has not been evaluated by regulatory agencies.

Microwave Doppler radar energy passes through glass and most common non-metallic walls.

The PIR detector reacts to objects rapidly changing temperature within its field-of-view.

Detectors using passive infrared (PIR) technology recognize that all objects give off (emit)

infrared energy. The warmer an object is, the greater the amount of infrared energy is emitted.

The PIR receiver technology is designed to detect the change in infrared energy caused when

a target of a different temperature from a stable background passes through its field of view

(coverage pattern).

Point the detector away from:

Glass exposed to the outdoors.

Objects that might change temperature rapidly such as heat sources, air

conditioning outlets, or surfaces heated by sunlight.

Objects that small animals such as birds and mice might climb on (stairs,

shelves, ledges, furniture) and appear in the upper zones of the PIR which

are more sensitive. Small animals in close proximity to the detector,

within the field of view might, also cause false alarms.

Do not install:

In a location where direct sunlight shines onto the detector.

Outdoors.

Near rotating machines or other moving objects within the field of view.

8en | Installation considerations Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN

2018.10 | 01 | F.01U.352.414 Reference Manual Bosch Building Technologies

Do not install:

Near objects that can block the field of view.

Where an intruder would walk only directly toward or away from the

detector.

In a location where the detector’s field of view is blocked by movable

objects such as boxes, furniture, doors or windows, window coverings,

hanging signs, etc. The PIR detector does not detect through glass.

Near doors and windows or other openings where cold or warm air can

flow onto the detector.

Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN Installation | en 9

Bosch Building Technologies Reference Manual 2018.10 | 01 | F.01U.352.414

5 Installation

This section includes hardware details and the instructions you need to install the motion

detector base.

5.1 Self-locking cam

The detector includes a self-locking cam for easy installation. Refer to the following

information to open and close the detector.

Open the detector and remove the base

1. Insert a flathead screwdriver into the self-locking cam hole.

2. Turn to the unlock position.

3. Slide, then lift the detector from the base.

1 2 3

Attach the detector back onto the base

Notice!

When you remove the detector from the base, the cam automatically returns to the locked

position. When you place the detector onto the base, the cam must remain in locked position.

Do not manually change the cam once you remove the detector from the base; doing so

unlocks the detector and prevents you from putting the detector correctly onto to base.

1. Put detector onto the base.

2. Slide the detector up until you hear it "click."

10 en | Installation Professional Series TriTech AM Motion Detectors

with Anti-mask, LSN

2018.10 | 01 | F.01U.352.414 Reference Manual Bosch Building Technologies

5.2 Install options

Install the detector using the detector base.

Install the detector on a flat wall or in a corner. Refer to Mount directly –

for linking.

Install the detector using a bracket. Refer to Install on a bracket, page 11.

Detector coverage patterns are designed for optimal performance when

installed vertically and horizontally level. The detector base includes a

removable bubble level which helps you align the unit. Before drilling the

installation holes, use the bubble level to align the detector. Refer to

Bubble level, page 14.

Install directly to the surface

When installing onto a flat surface, select the installation holes shown in the figure. Drill or tap

out holes with a screwdriver.

To use the wall tamper feature, use one of the installation holes shown in red in the following

figure.

Otros manuales para Professional Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sensor de seguridad de Bosch

Bosch

Bosch WEU PDO 6 Manual de usuario

Bosch

Bosch DS936 Manual de usuario

Bosch

Bosch D-tect 150 Manual de usuario

Bosch

Bosch ISC-PDL1-WC30G Manual de usuario

Bosch

Bosch Blue Line D1-P Manual de usuario

Bosch

Bosch CRS-WM-TA869 Manual de usuario

Bosch

Bosch ISC-BDL2-WP12 Manual de usuario

Bosch

Bosch D-tect 150 Professional Manual de usuario

Bosch

Bosch DS915 Manual de usuario

Bosch

Bosch TriTech DS950 Series Manual de usuario

Bosch

Bosch F220 Manual de usuario

Bosch

Bosch DS820 Manual de usuario

Bosch

Bosch Classic TriTech CM Series Manual de usuario

Bosch

Bosch ISC-PDL1-W18H Manual de usuario

Bosch

Bosch LTC 2210 Series Manual de usuario

Bosch

Bosch FMC-210-SM-G-R Manual de usuario

Bosch

Bosch D-tect 120 Guía rápida

Bosch

Bosch DS794Z Manual de usuario

Bosch

Bosch ISN-AP1 Manual de usuario

Bosch

Bosch RF835E Manual de usuario

Bosch

Bosch ISC-SM-90 Manual de usuario

Bosch

Bosch DS840 Manual de usuario

Bosch

Bosch Motion Detector Manual de usuario

Bosch

Bosch Multi-Detector DMD4 Instrucciones de montaje

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario

Solinst

Solinst 301 Manual de usuario