Bosch VEZ IP Series Manual de usuario

AutoDome Easy IP

VEZ IP Series

en Installation Manual

AutoDome Easy IP Table of Contents | en iii

Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08

Table of Contents

1Safety 1

1.1 Important Safety Instructions 1

1.2 Safety Precautions 4

1.3 Important Notices 4

1.4 Customer Support and Service 11

2 Unpacking 13

2.1 Parts List 13

2.2 Additional Tools Required 13

2.3 Safety Rules 14

3Description 15

4 Preparing the Wiring 17

4.1 Ethernet (control and video) 17

4.2 Power 17

4.3 Alarm 18

5 Connections 19

5.1 Connecting to the Ethernet 19

5.2 Connecting the Power 19

5.3 Connecting the Alarm Input 20

6 Mounting Installation 21

6.1 Installing the Wall Mount 21

6.2 Installing the Pipe Mount 25

6.2.1 Installing the Base to a Metal Junction Box 30

6.2.2 Powering On 31

7 Setting Protocol and Video Format 33

iv en | Table of Contents AutoDome Easy IP

F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

8 Configuring IP Communications 35

8.1 Overview of Features 35

8.2 System Requirements 37

8.3 IP Network Address Requirements 38

8.4 Connecting the AutoDome Easy IP to the PC 38

8.5 Installing the Required Software 39

8.6 Changing the Network Settings/IP Address 40

8.6.1 Installing the Configuration Manager 40

8.6.2 Using the Configuration Tool 41

8.6.3 Using the AutoDome Easy IP Web Server 41

9 Viewing Live Images and Controlling the PTZ 45

9.1 Establishing a Connection 45

9.2 Configuring Data Streams 45

9.3 Controlling Camera Operations 46

9.4 Entering a Keyboard Control Command 49

10 Navigating the Menus 53

10.1 Preset Menu 54

10.1.1 Setting and Saving Presets 55

10.1.2 Recalling a Preset Position 56

10.1.3 Creating Titles 56

10.2 Tour Menu 57

10.2.1 Setting a Tour 58

10.2.2 Running / Stopping a Tour 59

10.3 Auto Pan Menu 59

10.3.1 Setting Auto Pans 60

10.3.2 Run Auto Pan 62

10.4 Sector Menu 62

10.5 Alarm Menu 64

10.5.1 Configuring the Alarm for IP Alarm Features 65

10.5.2 Releasing an Alarm 66

10.6 Camera Setup Menu 66

10.6.1 Focus Control Menu 67

10.6.2 WB Control Menu 69

10.6.3 AE Control Menu 71

AutoDome Easy IP Table of Contents | en v

Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08

10.6.4 L/L Control Menu 73

10.7 Picture Menu 74

10.7.1 Initialize Camera Menu 75

10.8 Dome Setup Menu 75

10.8.1 Setting the Language 77

10.9 Inactivity Function 78

10.10 Initialize Dome Menu 80

10.10.1 Dome Information Menu 80

11 Recording Menus 81

11.1 Selecting Recordings 81

11.1.1 Controlling Playback 82

11.1.2 Printing a Screenshot 83

12 Settings Menus 85

12.1 General Main Menu 85

12.1.1 Identification Menu 86

12.1.2 Display Stamping Menu 86

12.1.3 Password Menu 88

12.1.4 Language Menu 89

12.1.5 Date/Time Menu 89

12.1.6 Time Server Menu 90

12.2 Encoder Main Menu 93

12.2.1 Picture Settings Menu 94

12.2.2 Encoder Profile Menu 94

12.2.3 Profile Configuration 95

12.2.4 JPEG Posting Menu 98

12.3 Recording Main Menu 100

12.4 Storage Medium Menu 100

12.5 iSCSI Menu 101

12.6 Partitioning 105

12.6.1 Viewing the Partition Status 111

12.6.2 Creating A Partition 112

12.6.3 Editing a Partition 112

12.6.4 Deleting Recordings 114

12.6.5 Deleting all Partitions 114

vi en | Table of Contents AutoDome Easy IP

F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

12.7 Recording Profiles 115

12.8 Recording Scheduler 116

12.8.1 Holidays 118

12.8.2 Deleting Holidays 118

12.8.3 Time Periods 119

12.8.4 Activating the Recording 119

12.8.5 Recording Status 119

12.9 Alarm Menu 119

12.9.1 Alarm Sources 120

12.9.2 Alarm Connections 120

12.9.3 Sending an Alarm E-mail 122

12.10 Service Main Menu 123

12.10.1 Network Menu 123

12.10.2 Multicasting 125

12.10.3 Encryption 126

12.10.4 Version Information 128

12.10.5 Livepage Configuration 128

12.10.6 Licenses 130

12.10.7 Maintenance 130

13 Keyboard Commands by Number 133

14 Preventive Maintenance 135

14.1 Spare Parts List 135

15 Troubleshooting 137

AutoDome Easy IP Safety | en 1

Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08

1Safety

1.1 Important Safety Instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning.

Follow any instructions provided with the unit. It is

generally sufficient to use a dry cloth for cleaning, but a

moist lint-free cloth or leather shammy may also be used.

Do not use liquid cleaners or aerosol cleaners.

2. Heat sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other devices

(including amplifiers) that produce heat.

3. Ventilation - Any openings in the unit housing are provided

for ventilation to prevent overheating and ensure reliable

operation. Do not block or cover these openings. Do not

place the unit in an enclosure unless proper ventilation is

provided, or the manufacturer's instructions have been

adhered to.

4. Water - Do not use this unit near water, for example near a

bathtub, washbowl, sink, laundry basket, in a damp or wet

basement, near a swimming pool, in an outdoor

installation, or in any area classified as a wet location. To

reduce the risk of fire or electrical shock, do not expose

this unit to rain or moisture.

5. Object and liquid entry - Never push objects of any kind

into this unit through openings, as they may touch

dangerous voltage points or short out parts, which could

result in a fire or electrical shock. Never spill liquid of any

kind on the unit. Do not place objects filled with liquids,

such as vases or cups, on the unit.

6. Lightning - For added protection during a lightning storm,

or when leaving this unit unattended and unused for long

periods, unplug the unit from the wall outlet and

disconnect the cable system. This will prevent damage to

2en | Safety AutoDome Easy IP

F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

the unit from lightning and power line surges.

7. Control adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit. Use of

controls or adjustments, or performance of procedures

other than those specified, may result in hazardous

radiation exposure.

8. Overloading - Do not overload outlets and extension cords.

This can cause fire or electrical shock.

9. Power cord and plug protection - Protect the plug and

power cord from foot traffic and from being pinched by

items placed upon or against them at electrical outlets;

also protect the power cord's exit from the unit. For units

intended to operate with 230 VAC, 50 Hz, the input and

output power cord must comply with the latest versions of

IEC Publication 227 or IEC Publication 245.

10. Power disconnect - Units with or without ON/OFF

switches have power supplied whenever the power cord is

inserted into the power source; however, the unit is

operational only when the ON/OFF switch is in the ON

position. The power cord is the main power disconnect

device for switching off the voltage for all units.

11. Power sources - Operate the unit only via the type of

power source indicated on the label. Before proceeding,

be sure to disconnect the power from the cable being

connected to the unit.

– For battery powered units, refer to the operating

instructions.

– For units supplied by an external power source, use

only the recommended or approved power supplies.

–Forlimitedpowersourceunits, this power source

must comply with EN60950. Substitutions may

damage the unit or cause fire or shock.

– For 24 VAC units, voltage applied to the unit's power

input should not exceed ±10% or 26.4 VAC. User-

supplied wiring must comply with local electrical

codes (Class 2 power levels). Do not ground the

AutoDome Easy IP Safety | en 3

Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08

supply at the terminals or at the unit's power supply

terminals.

– If unsure of the type of power supply to use, contact

your dealer or local power company.

12. Servicing - Do not attempt to service this unit yourself.

Opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

13. Damage requiring service - Unplug the unit from the main

AC power source and refer servicing to qualified service

personnel when any damage to the equipment has

occurred, for example if:

– the power supply cord or plug is damaged

– exposure to moisture, water, and/or inclement

weather (rain, snow etc.)

– liquid has been spilled in or on the equipment

– an object has fallen into the unit

– the unit has been dropped or the unit cabinet is

damaged

– the unit exhibits a distinct change in performance

– the unit does not operate normally when the user

correctly follows the operating instructions.

14. Replacement parts - Be sure the service technician uses

replacement parts specified by the manufacturer, or that

they have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical

shock, or other hazards.

15. Safety check - Safety checks should be performed on

completion of service or repairs to the unit, to ensure that

the unit is in proper operating condition.

16. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

17. Attachments, changes, or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change to or modification of the equipment not

expressly approved by Bosch could void the warranty or, in

4en | Safety AutoDome Easy IP

F01U079609 | 1.0 | 2008.08 Installation Manual Bosch Security Systems, Inc.

the case of an authorization agreement, authority to

operate the equipment.

1.2 Safety Precautions

1.3 Important Notices

Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious

injury to persons and/or severe damage to the unit. Use only

with the cart, stand, tripod, bracket, or table specified by the

manufacturer. When a cart is used, exercise caution and care

when moving the cart/apparatus combination to avoid tipping it

over, which could result in injury. Quick stops, excessive force,

or uneven surfaces may cause the cart/unit combination to

overturn. Mount the unit in line with the manufacturer's

instructions.

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

DANGER! DANGER! High risk:

This symbol indicates an imminently hazardous situation such

as "Dangerous Voltage" inside the product. If not avoided, this

will result in an electrical shock, serious bodily injury, or death.

WARNING! WARNING! Medium risk:

Indicates a potentially hazardous situation. If not avoided, this

may result in minor or moderate injury. Alerts the user to

important instructions accompanying the unit.

CAUTION! CAUTION! Low risk: (without safety alert symbol)

Indicates a potentially hazardous situation. If not avoided, this

may result in damage to property or risk of damage to the unit.

NOTICE! NOTICE! This symbol indicates information or a

company policy that relates directly or indirectly to the safety of

personnel or protection of property.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Bosch

Bosch

Bosch EX65 Manual de usuario

Bosch

Bosch NDS-5703-F360 Manual de usuario

Bosch

Bosch NTI-40012-A3S Manual de usuario

Bosch

Bosch LTC 0510 Series Manual de usuario

Bosch

Bosch AutoDome VG5-162-EC0 Manual de usuario

Bosch

Bosch VG4-323-ECS1W Manual de usuario

Bosch

Bosch LTC-0498-28W Manual de usuario

Bosch

Bosch FLEXIDOME corner 9000 MP Instrucciones de montaje

Bosch

Bosch NDP-5512-Z30-P Manual de usuario

Bosch

Bosch FLEXIDOME IP panoramic 6000 Series Manual de usuario

Bosch

Bosch AUTODOME IP 5000 IR NEZ-5 Series Manual de usuario

Bosch

Bosch DINION IP starlight 7000 HD Manual de usuario

Bosch

Bosch NBE-4502-AL Manual de usuario

Bosch

Bosch AUTODOME IP 4000i Manual de usuario

Bosch

Bosch KBE-335V55-20 Manual de usuario

Bosch

Bosch UHI Series Manual de usuario

Bosch

Bosch MIC Series 400 Manual de usuario

Bosch

Bosch VG5 700 Series Manual de usuario

Bosch

Bosch FLEXIDOME panoramic 5100i Manual de usuario

Bosch

Bosch MIC Series 500 Manual de usuario

Bosch

Bosch LTC-0498-21 Manual de instrucciones

Bosch

Bosch VEI-Series Manual de usuario

Bosch

Bosch MIC Series 440 Manual de usuario

Bosch

Bosch LTC 0135/10 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario