Bosch UML-262-90 Manual de usuario

Full HD LCD Monitors

UML-262-90 | UML-422-90

en User’s Manual

Full HD LCD Monitors Table of Contents | en 3

Bosch Security Systems, Inc. User’s Manual F.01U.172.600 | 1.0 | 2010.10

Table of Contents

1Safety 5

1.1 Important safety instructions 5

1.2 Safety precautions 8

1.3 Important notices 8

1.4 Customer Support and Service 15

2 Unpacking 17

2.1 Parts List 17

3 Monitor Panels 18

3.1 UML-262-90 Front Control Panel 18

3.2 UML-262-90 Bottom Panel 19

3.3 UML-422-90 Front Panel 19

3.4 UML-422-90 Rear Control Panel 20

3.5 UML-422-90 Bottom Panel 21

3.6 Remote Control 22

3.7 Remote Control Battery Installation 24

4 Description 25

4.1 Features 25

4.2 Power 26

4en | Table of Contents Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10 User’s Manual Bosch Security Systems, Inc.

5 Installing the Monitor 27

5.1 Ventilation 27

5.2 Mounting the Monitor 27

5.2.1 Desktop Installation 27

5.2.2 Wall Mount Installation 29

5.3 Connecting the Composite Video Signal to the Monitor 30

5.4 Connecting the Y/C (S-Video) Signal to the Monitor 31

5.5 Connecting Audio to the Monitor 31

5.6 Connecting the PC Signal to the Monitor 32

5.6.1 HDMI Connection 32

5.6.2 DVI Connection 32

5.6.3 VGA Connection 32

5.7 Connecting an Alarm Trigger 33

5.8 Single / Multiple Monitor Configuration 35

6 Navigating the Monitor 37

6.1 Navigating the Front Panel 37

6.2 Navigating the Monitor On-screen Display (OSD) 38

6.3 On-screen Display Menus 39

6.4 Custom Menu 40

6.5 Picture/Sound Menu 41

6.6 PIP Menu 44

6.7 Setup Menu 45

7 Power Management 48

7.1 Power Consumption 48

7.2 LED Indicator 48

8Troubleshooting 49

9 Maintenance 50

10 Technical Specifications 51

Full HD LCD Monitors Safety | en 5

Bosch Security Systems, Inc. User’s Manual F.01U.172.600 | 1.0 | 2010.10

1Safety

1.1 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Unplug the unit from the outlet before cleaning.

Follow any instructions provided with the unit. Generally,

using a dry cloth for cleaning is sufficient, but a moist fluff-

free cloth or leather shammy may also be used. Do not use

liquid cleaners or aerosol cleaners.

2. Heat Sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other

equipment (including amplifiers) that produce heat.

3. Ventilation - Any openings in the unit enclosure are

provided for ventilation to prevent overheating and ensure

reliable operation. Do not block or cover these openings.

Do not place the unit in an enclosure unless proper

ventilation is provided, or the manufacturer's instructions

have been adhered to.

4. Water - Do not use this unit near water, for example near a

bathtub, washbowl, sink, laundry basket, in a damp or wet

basement, near a swimming pool, in an outdoor

installation, or in any area classified as a wet location. To

reduce the risk of fire or electrical shock, do not expose

this unit to rain or moisture.

5. Object and liquid entry - Never push objects of any kind

into this unit through openings as they may touch

dangerous voltage points or short-out parts that could

result in a fire or electrical shock. Never spill liquid of any

kind on the unit. Do not place objects filled with liquids,

such as vases or cups, on the unit.

6. Lightning - For added protection during a lightning storm,

or when leaving this unit unattended and unused for long

periods, unplug the unit from the wall outlet and

6en | Safety Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10 User’s Manual Bosch Security Systems, Inc.

disconnect the cable system. This will prevent damage to

the unit from lightning and power line surges.

7. Controls adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit. Use of

controls or adjustments, or performance of procedures

other than those specified, may result in hazardous

radiation exposure.

8. Overloading - Do not overload outlets and extension cords.

This can cause fire or electrical shock.

9. Power cord and plug protection - Protect the plug and

power cord from foot traffic, being pinched by items

placed upon or against them at electrical outlets, and its

exit from the unit.

10. Power disconnect - Units have power supplied to the unit

whenever the power cord is inserted into the power

source. The power cord is the main power disconnect

device for switching off the voltage for all units.

11. Power sources - Operate the unit only from the type of

power source indicated on the label. Before proceeding,

be sure to disconnect the power from the cable to be

installed into the unit.

– For battery powered units, refer to the operating

instructions.

– For external power supplied units, use only the

recommended or approved power supplies.

– For limited power source units, this power source

must comply with EN60950. Substitutions may

damage the unit or cause fire or shock.

– If unsure of the type of power supply to use, contact

your dealer or local power company.

12. Servicing - Do not attempt to service this unit yourself.

Opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

Full HD LCD Monitors Safety | en 7

Bosch Security Systems, Inc. User’s Manual F.01U.172.600 | 1.0 | 2010.10

13. Damage requiring service - Unplug the unit from the main

AC power source and refer servicing to qualified service

personnel when any damage to the equipment has

occurred, such as:

– the power supply cord or plug is damaged;

– exposure to moisture, water, and/or inclement

weather (rain, snow, etc.);

– liquid has been spilled in or on the equipment;

– an object has fallen into the unit;

– unit has been dropped or the unit cabinet is damaged;

– unit exhibits a distinct change in performance;

– unit does not operate normally when the user

correctly follows the operating instructions.

14. Replacement parts - Be sure the service technician uses

replacement parts specified by the manufacturer, or that

have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical

shock, or other hazards.

15. Safety check - Safety checks should be performed upon

completion of service or repairs to the unit to ensure

proper operating condition.

16. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

17. Attachments, changes or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change or modification of the equipment, not

expressly approved by Bosch, could void the warranty or,

in the case of an authorization agreement, authority to

operate the equipment.

8en | Safety Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10 User’s Manual Bosch Security Systems, Inc.

1.2 Safety precautions

1.3 Important notices

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

switch as the main disconnect device for switching off the

voltage to the unit.

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as “Dangerous Voltage” inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious

injury and/or serious damage to the unit. Use only with the

cart, stand, tripod, bracket, or table specified by the

manufacturer. When a cart is used, use caution and care when

moving the cart/apparatus combination to avoid injury from

tip-over. Quick stops, excessive force, or uneven surfaces may

cause the cart/unit combination to overturn. Mount the unit

per the manufacturer's instructions.

Full HD LCD Monitors Safety | en 9

Bosch Security Systems, Inc. User’s Manual F.01U.172.600 | 1.0 | 2010.10

Coax grounding:

– Ground the cable system if connecting an outside cable

system to the unit.

– Connect outdoor equipment to the unit's inputs only after

this unit has had its grounding plug connected to a

grounded outlet or its ground terminal is properly

connected to a ground source.

– Disconnect the unit's input connectors from outdoor

equipment before disconnecting the grounding plug or

grounding terminal.

– Follow proper safety precautions such as grounding for

any outdoor device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code,

ANSI/NFPA No.70, provides information regarding proper

grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors,

location of discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Electronic Surveillance - This device is intended for use in

public areas only. U.S. federal law strictly prohibits

surreptitious recording of oral communications.

Environmental statement - Bosch has a strong commitment

towards the environment. This unit has been designed to

respect the environment as much as possible.

Electrostatic-sensitive device - Use proper CMOS/MOS-FET

handling precautions to avoid electrostatic discharge.

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that electronic

and electrical appliances, which have reached the end of their

working life, must be collected and disposed of separately

from household waste material. Separate collecting systems

are usually in place for disused electronic and electrical

products. Please dispose of these units at an environmentally

compatible recycling facility, per European Directive 2002/96/

10 en | Safety Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10 User’s Manual Bosch Security Systems, Inc.

NOTE: Wear required grounded wrist straps and observe proper

ESD safety precautions when handling the electrostatic-

sensitive printed circuit boards.

Fuse rating - For security protection of the device, the branch

circuit protection must be secured with a maximum fuse rating

of 16A. This must be in accordance with NEC800 (CEC Section

60).

Grounding and polarization - This unit may be equipped with a

polarized alternating current line plug (a plug with one blade

wider than the other blade). This safety feature allows the plug

to fit into the power outlet in only one way. If unable to insert

the plug fully into the outlet, contact a locally certified

electrician to replace the obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding

plug (a plug with a third pin for earth grounding). This safety

feature allows the plug to fit into a grounded power outlet only.

If unable to insert the plug into the outlet, contact a locally

certified electrician to replace the obsolete outlet. Do not

defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move

the unit with care. Excessive force or shock may damage the

unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially

regarding clearance from power and lightning conductors and

transient protection, must be in accordance with NEC725 and

NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily

accessible disconnect device in the building installation wiring.

Pluggable equipment - Install the socket outlet near the

equipment so it is easily accessible.

Power resupply - If the unit is forced to power down due to

exceeding the specified operating temperatures, disconnect

the power cord, wait for at least 30 seconds, and then

reconnect the power cord.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Bosch

Bosch

Bosch UML-223-90 Manual de usuario

Bosch

Bosch UML-423-90 Guía de instalación

Bosch

Bosch MON152CL30 Manual de usuario

Bosch

Bosch UML-172-90 Manual de usuario

Bosch

Bosch LTC 2814/90 Series Manual de usuario

Bosch

Bosch DDU S2 Plus Manual de usuario

Bosch

Bosch UML-202 Manual de usuario

Bosch

Bosch Rexroth ctrlX HMI DE0015 Manual de usuario

Bosch

Bosch MON170CL Manual de usuario

Bosch

Bosch LTC 2910/90 Manual de usuario

Bosch

Bosch LTC-2917-91 Manual de usuario

Bosch

Bosch UML-323-90 Manual de usuario

Bosch

Bosch Rexroth IndraControl VDP 16.1 Manual técnico

Bosch

Bosch LTC 9113/00 Manual de usuario

Bosch

Bosch UML-172 Manual de usuario

Bosch

Bosch IndraControl VDP 60 Manual de usuario

Bosch

Bosch UML-19P-90 Manual de usuario

Bosch

Bosch BULLS ICONIC EVO TR 1 750 Manual de usuario

Bosch

Bosch Rexroth IndraControl VDP 15.3 Multi Touch Manual de usuario

Bosch

Bosch Rexroth IndraControl VDP 16.3 Manual técnico

Bosch

Bosch UML-273-90 Manual de usuario

Bosch

Bosch Rexroth VEP 15.6 Multi Touch Manual de usuario

Bosch

Bosch UML-245-90 Instrucciones originales

Bosch

Bosch LTC 2821 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

LG M1950D-PZ Manual de usuario