BOS BS-IPT4002LPR Manual de usuario
1
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
BS-IPT4002LPR / BS-IPT4012LPR
USER GUIDE
2
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
1.1 Product Overview
This product which provides a consistent range of cost-effective and reliable network cameras
can fully meet your requirements. Based on embedded Linux operating system, network
cameras could be easily accessed and managed either locally or remotely with great reliability.
With built-in high-performance DSP video processing modules, the cameras pride on low power
consumption and high stability. They support state-of-the-art H.265/ H.264/ MJPEG video
compression algorithm and industry-leading HD dual-stream technology to achieve the highest
level of video image quality under the limited network resources. It is fully functional, supporting
for flexible and comprehensive alarm linkage mechanism, day and night auto switch and privacy
masking, etc.
In practical applications,network cameras could either work independently in the LAN, or be
networked to form a powerful safety monitoring system. It is widely used in fields such as
finance, education, industrial production, civil defense, health care for security’s sake.
1.2 Key Features
Based on Linux OS with high reliability
H.265/ H.264/ MJPEG video compression capability
Support Plugin-Free mode
Support Smart Stream
Support ONVIF Profile G & Q & S & T
Support activation and set-up of the security questions for cameras(for V4x.7.0.69 or
above)
Support Primary Stream/ Secondary Stream/ Tertiary Stream
Support PoE for power supply
ICR filter with auto switch, true day/night
Built-in WEB server, support IE/ Firefox/ Chrome/ Safari browser
UPnP protocol for the easy management of IPC
Motion Detection, Privacy Masking, Network Fault Detection and ROI
Support Heat Map function
FTP upload, SMTP upload, SD card record and SIP phone
G.711/AAC audio compression capability
Real-time video electronic amplification
Three-privilege levels of users for flexible management
microSD/SDHC/SDXC card local storage support, expand the edge storage
3
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
2.1 Setting the Camera over the LAN
Connecting the camera to a switch or a router is the most common connection method. The
camera must be assigned an IP address that is compatible with its LAN.
2.1.1 Connect the Camera to the PC Directly
In this method, only the computer connected to the camera will be able to view the camera. The
camera must be assigned a compatible IP address to the computer. Details are shown as the
following figure.
Figure 2-1-1 Connect the camera to the PC directly
2.1.2 Connect via a Switch or a Router
Refer to the following figure to set network camera over the LAN via the switch or router.
Figure 2-1-2 Connect via a switch or a Router
2.2 Dynamic IP Connection
◆Connecting the network camera via a router
Step1: Connect the network camera to a router;
Step2: On the camera, assign a LAN IP address, the Subnet mask and the Gateway;
Step3: On the router, set port forwarding. E.g. 80, 8000 and 554 ports. The steps for port
forwarding vary depending on different routers. Please look up the router's user manual for
assistance with port forwarding;
Step4: Apply a domain name from a domain name provider;
Step5: Configure the DDNS settings in the setting interface of the router;
Step6: Visit the camera via the domain name.
4
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Figure 2-2 Connect the network camera via a router using dynamic IP
5
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Chapter III Accessing the Network Camera
The camera must be assigned an IP address to be accessible.
3.1 Assigning An IP Address
The Network Camera must be assigned an IP address to be accessible. The default IP address of
Network Camera is 192.168.5.190.
You can either change the IP address of the camera via Smart Tools or browser. Please connect the
camera in the same LAN of your computer.
3.1.1 Assigning An IP Address Using Smart Tools
Smart Tools is a software tool which can automatically detect multiple online network cameras
connected in the LAN, set IP addresses, and manage firmware upgrades. It’s recommended when
assigning IP addresses for multiple cameras.
Step1: Install Smart Tools (The software could be downloaded from our website);
Step2: Start Smart Tools, click the IPC Tools page, then enter the device information including IP
address, MAC address, Status, Port number, Netmask, and Gateway of all network cameras
will be displayed. Details are shown as shown below;
6
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Step3: Select a camera or multiple cameras according to the MAC addresses;
Select single camera
Select multiple cameras
Step4: If the selected camera shows "Active" in the status bar, you can directly type the User Name
and Password (Camera with version lower than 4x.7.0.69 is using admin/ms1234 by default),
change the IP address or other network values, and then click “Modify” button;
7
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
If the selected camera shows "Inactive" in the status bar(Camera with version V4x.7.1.69 or
above), click to set the password when using it for the first time. You can also set the
security questions when activating the camera in case that you forget the password(you can reset
the password by answering three security questions correctly). Click ‘Save’ and it will show that the
activation was successful.
Note:
(1) Password must be 8 to 32 characters long, contain at least one number and one letter.
(2) You need to upgrade Smart Tools version to V2.4.0.1 or above to activate the camera.
After activation, you can change the IP address or other network values, and then click “Modify”
button.
8
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Step5: Change the IP address successfully;
Step6: By double clicking the selected camera, you can access the camera via web browser directly.
The Internet Explorer window will pop up.
9
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
3.1.2 Assign An IP Address via Browser
If the network segment of the computer and that of the camera are different, please follow the
steps to change the IP address:
Step1: Change the IP address of computer to 192.168.5.0 segment, here are two ways as following:
a. Start→Control Panel→Network and Internet Connection→Network Connection→
Local Area Connection, and double click it. (Refer to Figure 3-1-8);
b. Click “Advanced”, and then click “IP settings” →“IP address” →“Add” (See Figure 3-1-
9). In the pop-up window, enter an IP address that in the same segment with network
camera ( e.g. 192.168.5.61, but please note that this IP address shall not conflict with
the IP address on the existing network);
10
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Step2: Start the browser. In the address bar, enter the default IP address of the camera:
http://192.168.5.190
Step3: If the camera’s firmware version is lower than V4x.7.1.69, it will directly display the login
page, enter the user name and password when the LOGIN page appears;
Default user name: admin
Default password: 123456
If the camera’s firmware version is V4x.7.1.69 or above, you need to set the password first
when using it for the first time. And you can also set three security questions for your device
after activation. Then, you can log in the device with the username(admin) and a custom
password.
Note:
(1) Password must be 8 to 32 characters long, contain at least one number and one letter.
(2) You can click the “forget password” in login page to reset the password by answering three security
questions when you forget the password, if you set the security questions in advance.
Step4: After login, please select “Configuration”→“Basic Settings”→“Network”→“TCP/IP”. The
Network Settings page appears (Shown as following Figure);
Step5: Change the IP address or other network values. Then click “Save” button;
Step6: The change of default IP address is completed.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
