BolyGuard MG983G-30M Manual de usuario

Infrared Mobile Digital Scouting Camera

User’s Manual

MG983G-30M

Content

Instruction.................................................. 

.1 General Description...................................... 

.2 Application.............................................. 

.3 Camera Overview........................................ 

.4 Shooting Information Display..............................

.5 Two Way Communication................................. 

Cautions.................................................... 

Quick Start Guide............................................ 

.1 Power Supply............................................ 

.2 Insert SD card and SIM card............................... 

.3 Do the Camera Settings................................... 

.4 Manually Send a MMS or GPRS Photo..................... 

.5 SMS Control............................................ 

Advanced Operations........................................ 

.1 Work Mode............................................. 

.2 Settings Menu.......................................... 

4.2.1 Setting Items....................................... 

4.2.2 Default Set......................................... 

.3 Use the Remote Control.................................. 

.4 Load or Remove a Wireless Sensor........................ 

.5 Change the Settings via Android APP or SMS............... 

.6 User Level..............................................

.7 Use Android APP........................................ 

.8 SMS Command List..................................... 

Appendix I: PIR Detection Zone.................................

Appendix II: Error Code....................................... 

Appendix Ⅲ: Technical Specifications........................... 

Appendix Ⅳ:PartsList........................................

MG983G-30M  

 

1 Instruction

1.1 General Description

This camera, a digital scouting camera with 3G

communication function, is a digital infrared surveillance

camera, triggered by any movement of human or animal

monitored by a high sensitive Passive Infrared (PIR) motion

sensor, and then automatically captures high quality pictures

(up to 30M pixels) or records video clips (1080 FHD). It sends

picture instantly to your mobile device or video (less than 10M)

to your e-mail via GPRS network. You’ll be alerted just when

the camera is triggered or per custom settings.

It takes color pictures or videos under sufficient daylight.

While at night, the built-in infrared LEDs can help to take clear

pictures or videos (monochrome).

There is a 3” color LCD display screen on the camera and a

sound recorder embedded in the camera. A laser pointer is used

to help target the photo area of the camera.

It is resistant against water and snow. The camera can also

be used as a portable digital camera.

1.2 Application

This camera can be used as an automatic surveillance

device for guarding and recording unexpected intrusion to

homes, shops, schools, depots, offices, taxis, work sites, etc. It

can also be used as a trail camera for hunting or monitoring

animals by recording the traces of wild animals. It can be left

alone for weeks and months and it will save event records

automatically in digital format.

MG983G-30M  

 

1.3 Camera Overview

Take a few moments to familiarize with the camera

controls and displays. It is helpful to bookmark this section and

refer to it when reading through the rest of the manual.

Figure 1 Diagram of camera functional indicators

MG983G-30M  

 

Figure 2 Inner panel view

Figure 3 Diagram of camera interfaces

MG983G-30M  

 

1.4 Shooting Information Display

When the camera is turned on (the power switch is slid to

SETUP position), the current settings will be displayed on

screen.

Figure 4 Shooting information display

is the correct SIM card status and the available space

of SD card should be a none zero value.

1.5 Two Way Communication

You can set SMS control submenu as ON to open the two

way communication function. Under this setting, the camera

can receive and respond to your SMS command or the Android

APP command.

This camera can send pictures instantly to your mobile

device via WCDMA/GSM(GSM not work in USA and Canada)

network. You’ll be alerted just when a picture or video has been

taken. The camera sends MMS or Email message through

MMSC(MMS Service Center) or GPRS network, so before using

this function, you need to open MMS and GPRS service from

MG983G-30M  

 

your service provider. It supports following bands ：GSM with

850MHz, 900MHz, 1800MHz and 1900MHz ；WCDMA with

850MHz, 900MHz, 1900MHz and 2100MHz.

MG983G-30M  

 

2 Cautions

The working voltage of the camera is 6V. The camera is

supplied by the power adapter or 8 AA batteries.

Please install batteries according to shown polarity.

Please insert the SD card before power on camera. The

camera has no internal memory for saving images or videos.

The camera will not work if there is no SD card.

Please unlock the write-protect switch before inserting the

SD card.

Please do not insert or take out the SD card when the power

switch is at ON position.

Please make sure that your SIM card supports the MMS and

GPRS data business.

When going into the SETUP mode, allow approximately

10-20 seconds for the camera to acquire a signal.

It is recommended to format the SD card by the camera

when used for the first time. Many other SD cards formatted

by other cameras have poor compatibility with different

brands of cameras. So it is best to format the SD card with

this camera or on a computer.

In the SETUP mode, the camera will shut down

automatically after 3 minutes if no operation is done. Please

turn on the power again if you want to continue to work with

the control.

MG983G-30M    

 

3 Quick Start Guide

3.1 Power Supply

Use 8 AA batteries. High-density and high-performance

alkaline or lithium batteries are recommended.

Also 6V external power supply and solar panel are

supported. The battery can be just a backup for emergency use

(6V support).

3.2 Insert SD card and SIM card

Insert an unlocked SD card and an available MMS and

GPRS enabled SIM card.

3.3 Do the Camera Settings

Down load the camera set-up software (BMC-config) from

our website.

The specified website is written in the last page of

the manual.

1) Open the software and select camera model:

MG983G-30M    

 

2) Set the camera parameters

First, select your country and carriers (step1) according to

your SIM card and input your receiving phone number in

“administrator number” and receiving e-mail address in

“Receive Email 1”(step3). For first time use, we suggest you

to use default settings (step2), any settings you want to change,

please click “Change Setting”.

3) Do WAP/Internet settings

Tabla de contenidos

Otros manuales de Cámara digital de BolyGuard

BolyGuard

BolyGuard SG983G Series Manual de usuario

BolyGuard

BolyGuard BG590-K2 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario