Bodyfriend REX-L Manual de usuario
BODYFRIEND
Massage Chair
REX-L
User Manual
Product image or content descriptions may slightly dier due to product improvements without previous notice.
Introduction
Product Features
Thank you for purchasing BODYFRIEND Massage Chair. Before
using our product, please read through the safety precautions
and operation instructions carefully. We kindly ask users to
understand that there may be slight dierences in image and
content descriptions presented throughout this manual due
to product quality improvements. Thank you.
Zero Gravity
Distributing gravitational pressure
by a weightless positioning of the
body, recline angles can further be
adjusted to optimize the massage
experience.
Ergonomic Frame
SL Frame best supports the body
and massages the entire length of
the body from the head down to
the buttocks by conforming to the
contours of the body.
Zero Wall
Zero Wall feature automatically
slides chair forward when the
chair is reclined, saving the
trouble of allocating extra space
behind the chair.
Zero Gravity
Full Body
Massage
Dual Airpump
Ergonomic
Frame
Hand/Arm/
Shoulder Massage
Language
Zero Wall
Audio Guidance
Stereo
Speakers
Auto Massage
Modes
Sole Reexology
Rollers
Zipper
Upholstery
Auto Massage
Indicator
Bluetooth
Connectivity
Heating
WARNING - Do not install massage chair under direct sunlight
or where high temperature uctuations can occur.
IMPORTANT - Product image or content descriptions may slightly dier due to product quality improvements.
Table of Contents
Before Use Instructions Product Features 02
Safety Precautions 04
Important Safety Instructions 05
Components and Descriptions 06
Transporting/Grounding 07
Installation Instructions Installation 08
Controller Information Controller Button Descriptions 12
Controller Function Descriptions 14
Program Descriptions BODYFRIEND Customized Programs 19
Product Specifications Product Specifications 20
Troubleshooting Troubleshooting 21
Customer Support Guidelines 22
Before Use: Safety Precautions
Before using, please carefully read the “Safety Precautions” section for proper
installation and operation.
WARNING - Please do not try to install or repair
massage chairs without the assistance of technicians.
Bodyfriend is not responsible for replacement costs if the product is damaged or
breaks due to self -troubleshooting.
CAUTION - Please Do Not Install Outside the Home.
This product is for non-commercial household use only. Warrant y is subject
to cancellation if the product is used for commercial purposes.
To reduce injury and risk of re:
Prohibited
01 Do not install in bathrooms or areas with
high humidity levels. Could result in
electric shock.
02 Avoid using in areas with dust or areas
prone to rust.
03 Do not operate this device in settings with
temperatures exceeding 104F°.
04 Do not use outdoors.
05 Do not use near heaters or anything
radiating heat.
06 Install and use only when properly
grounded on at surfaces.
07 Use in areas with ample space and
reasonable air circulation.
08 Do not use after disassembling parts.
Can result in product malfunctions.
09 Do not use concurrently with other
electronic or medical devices.
10 Do not use aerosol (spray) products.
11 Do not place heavy objects on top of
this product.
12 Please take precautionary measures to
ensure toddlers, pets, and small beings
do not crawl under the body of the chair,
leg rest, etc. to prevent any injuries or
damage.
13 Do not allow more than one person to
operate the machine at a time.
14 If the power cord or power plug becomes
damaged in any way, disconnect from
the main supply immediately and consult
an authorized service engineer for repair
or replacement.
15 Do not damage, excessively bend,
pull, twist, or knot any device cords.
16 Do not stand on the legrest before, after,
or while the device is sliding forward or
back to its original resting position.
01 Check power supply before using.
02 Do not handle with wet hands.
03 Do not operate when body is wet.
04 Do not use after excessive eating.
05 Take precautionary measures to ensure
parts of the body or objects do not get
caught in any openings of the massage
chair.
06 When using targeted massage functions,
be aware of individual body signals, not to
over-stimulate targeted areas.
07 Individuals who have been hospitalized
for extended periods of time or are
recovering from medical injuries are asked
to use this product with caution.
08 Do not use if experiencing high fever or
show symptoms of high fever.
09 Do not use if suering from skin diseases
or have wounds not yet fully healed.
10 Consult a doctor before using if you
are a patient or suer from any body
malfunctions.
11 This device is not intended for use by
persons with reduced physical, sensory,
or mental capabilities or lack experience
and knowledge unless they are supervised
or have been given instructions concerning
the use of this device. Children should also
be supervised when using this device.
12 Consult a doctor before using if you suer
from any spinal disorders, osteoporosis, or
any other bone disorders.
13 Consult a doctor before using if you have
a pacemaker or any implantable medical
device.
14 Do not use if pregnant or have recently
given birth.
15 Please limit the use of this product for
children.
16 Be cautious not to let massage balls exert
excessive pressure to the spine.
17 Do not use this product on areas of the
body not intended for this device.
18 While the massage balls are initializing,
stay in the correct upright position for
accurate sensor locating.
19 Make sure the massage chair is upright
when mounting and dismounting.
20 Be cautious of hypothermia if unusual
fatigue or sleepiness ensues after receiving
a massage.
21 If you feel any pain or discomfort,
immediately stop the machine or adjust
settings to accommodate to personal
health needs/preferences.
22 Operate this device based on individual
health status.
23 People over 242lbs are not advised to use
this device.
24 Do not stand on the device. Operate the
chair only while being seated.
25 Do not stand on the leg rest.
Important Safety Instructions
Compulsory
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Components and Descriptions
01
Head Rest
02
Back Rest
03
Embedded Touch Switch
04
Seat Cushion
05
Controller Storage
06
Leg Massage Unit
07
Side Panel
08
USB Charging Port
09
Arm Massage Unit
10
Shoulder Massage Unit
Exterior
01
Power ON/OFF
02
Auto
03
Back Ascend
04
Back Descend
Embedded Touch
Switch
Interior
01
Back Massage Ball
02
Back/Waist Airbags
03
Calf Airbags
04
Power Source Terminal
05
Controller Socket
06
Feet Rollers
07
Feet Airbags
08
Thigh/Buttocks Airbags
09
Arm Airbags
10
Back Heating Pad
11
Shoulder Airbags
06
01
01 02 03 04
02
09
03
05
10
04
08
07
Transporting/Grounding
01
Reserve space for installation
of the massage chair.
02
Remove all miscellaneous objects around
or in direct contact with the machine.
03
Remove and disconnect any cables beneath
or around the chair.
After removing all cables and miscellaneous objects
from the oor, tilt the massage chair backward at an
angle and lift. After arriving at the desired location,
safely place the chair securely on the oor and begin
re-installation of the chair.
WARNING
※ Do not drag and take precautions to not damage the oor.
※ Do not lift the chair by the leg unit.
IMPORTANT
※ To avoid injury or damage to the device, we recommend two or
more people when transporting.
20"(50cm)
STEP 1. Undo Packaging
This product is packaged in three separate boxes.
Please check that you have received all necessary parts.
• Main Box : Back sheet, Head sheet, Seat cushion, Accessories (controller, cables, and manual)
• Arm / Shoulder Unit
• Leg Unit
STEP 2. Constructing the Leg Unit
01
With the controller, recline the chair to be parallel with the oor. Then, install the connector and air hose
pieces within the leg unit.
02
Connect the leg unit to the main body frame by aligning the parts as shown in the diagram below.
03
When all parts are aligned and in place, use the controller to lower the leg unit to its original resting
position.
Installation Part 01
Main Body
Main Body
Leg Unit
Leg Unit
Fasten the parts together using nails.
STEP 3. Assemble the Arm Unit / Attach the Back Cover
01
Connect the air hose and connector beneath the interior of the side panel.
02
After aligning the corresponding parts, fasten using nails.
03
Fasten the back cover into place using nails on the back of the
massage chair.
CAUTION
※ Do not lift or apply pressure to the back cover. Accidents or broken parts may
result.
Installation Part 02
Arm Unit
Main Body
Back Cover
STEP 5. Connecting to Power Supply
Plug the power cable into the socket at the lower end of the massage chair as depicted below. After
plugging in the power cable, turn on the power switch.
STEP 4. Connecting the Controller
Locate the controller socket towards the right arm rest and connect the controller cables with its socket.
Power Socket
Power Cable Power Switch
Controller Cable
Installation Part 03
Controller Socket
Tabla de contenidos
Otros manuales de Masajeador de Bodyfriend
