BOCI BLT4X Manual de usuario
BLT4XBOCI
BOCI
shanghai BOCI Automation Technology Co.,Ltd.
Room 807, Lane 955, jianchuan Road, Minhang
District, Shanghai, China.
Operating Instructions
Laser Cutting Head
BLT 420-QBH/QD
BLT440F-QBH/QD/Q+
BLT460F-QBH/QD/Q+
Original version
BOCI
01
2021/04/12
Revision Directory
Revision No. Revision Date Notes
First Edition
2
Version
1.0
BOCI
Table of contents
1. Prodcut Discription 4
1.1 Product view 4
1.2 Technical specifications 5
2. Assist gas Connectiosn 6
3. Water-cooling Connections 7
4. Eletrical Connections 8
5. Installation 10
A1. Repalce Upper protective Glass 20
A2. Replace Lower protective Glass 21
A3. Replace Ceramic Nozzle holder and
nozzle 22
A4. Beam Centering 23
Appendix B - Mechanical Dimensions 24
B1. Cutting heading installation
Dimensions
Appendix C - Noise
Appendix A - Maintance 20
3
BOCI
1. Product Discriptions
Lower protective lens 2
Lower protective lens 1
Focusing unit
Collimating unit
Upper Protective Lens 2
Upper Protective Lens 1
Fiber
socket
Cutting Gas
interface
Nozzle gas/
water-cooling
interafce
Water cooling inlet
Water cooling outlet
1.1 Prodcut View
Cutting Gas interface：ø10, Max Pressure 25 bar (2.5 MPa).
Nozzle gas/water-cooling interafce：ø6, Max Pressure 5 bar (0.5 MPa).
Water cooling interface：ø8, Max Water Pressure 5 bar (0.5 MPa), Min Flow
rate 2.0 l/min.
Installation：The cutting head is secured to the machine tool through
four ø 6.6mm (M6 bolts).
For more details, please refer to the installation dimension
in the appendix.
Figure 1-1: Cutting head view (structure and connections)
Attention:
4
Cutting Gas interface: Ø10, Max Pressure 25 bar(2.5 MPa).
Nozzel cooling gas interface: Ø6, Max pressuire 5 bar
(0.5Mpa).
BOCI
1.2 Technical Specifications
BLT420
15kw
Amplification Factor:
Vertical Adjustment Range: ±35mm
Horizontal Adjustment Range:
Fiber interface Adapator:
Cutting Head:
Laser Wavelength:
Laser Power:
Gas Connections:
Water cooling interface:Ø8, Max pressure 5 bar
(0.5Mpa), Min flow rate 2.0L/min.
Operation Temperature:
Storage Temperature:
Dimension:
Weight:
Water Cooling Connections:
425mm*122mm (Note:Only for BLT420 QBH, other models may vary)
About 5.5kg (Note: Only for BLT420 QBH, other models please see Appendix).
Attention:
In order to avoid damage during storage and transportation, the following
conditions should be noted:
1. Cutting head should be stored in the permissible temperature, humidity
range;
2. The staff should take reasonable measures to prevent the cutting head
from vibration or impact;
3. Do not store the cutting head in or near a magnetic field (such as
permanent magnet or strong alternating field).
5
BLT440F BLT460F
１０３０－１０９０ｎｍ
8kw 20kw
QBH/QD/Q+
BOCI
2. Gas Connections
1
1
2
Cutting
Gas
interface
Nozzle
cooling
gas
interface
Installation connections: cutting gas-1,nozzle cooling gas-2.
Attention:
The maximum cutting gas pressure is 25 bar (2.5 MPa).
Cutting gas quality should meet the gas quality in line with ISO 8573-1: 2010
requirements: solid particles - class 2, water - class 4, oil - class 3.
The purer the cutting gas, the longer the service life of the protective glass.
Cutting gas pipe diameter (outter diameter) 10mm, nozzle cooling gas pipe
diameter (outter diameter) 6mm.
Figure 2.1: Gas connections
6
BOCI
3. Water Cooling Connections
1A
2A
Cooling
Water
Outlet
Cooling
Water
inlet
Installation connections：Cooling water inlet 2A, cooling water outlet 1A.
Figure 3.1: Water cooling connections
Attention:
Water cooling pipe outter diameter 8mm, cooling water Max pressure 5 bar(0.5Mpa),
Min flow rate 2.0L/min.
7
POE
interface
HypCut
BCS210E
Supply
Power
220V
Power supply cable
POE cable
EtherCAT
cable
EtherCAT cable
Slave
Station
Main Station
Attention:
Only trained personnel can perform the above wiring.
When connecting the cutting head to the BCS200E,
the BCS200E must be powered off.
8
BOCI
4. Eletrical connections
4.1 BLT 4XHypCut Version
Figure 4.1: BLT4X HypCut Connections
Power supply
24VDC
PWE Cable
Power Supply Cable
HC Capcitive Sensor
CypCut
Main
Station
Cable Cable
Attention:
Only trained personnel can perform the above wiring.
When connecting the cutting head to the BC100,
the BCL4500A must be powered off.
9
BOCI
4.2 BLT 4X CypCut Version
Figure 4.2: BLT4X CypCut Connections
BOCI
5. Cutting Head Installation
During the installation process of the cutting head, dust or dirt may enter
the cutting head accidentally, polluting the optical lens and affecting its
functionalities.
To prevent dust or dirt from entering the cutting head, refer to the
following ways to install the cutting head:
Figure 5.1: Cleaning Equipment
10
Attention:
Any repair work and any workrelating to troubleshooting require special
knowledge and must only be carried out by trained specialist staff.
Specialist staff must be instructed in accordance with the regulations and
safety notes and informed of potentially hazardous situations.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
