Boca Systems Adjustable MC Ghost Manual de usuario
Users Manual
Adjustable MC Ghost Ticket PrinterAdjustable MC Ghost Ticket Printer
BOCA SYSTEMS, INC.
©1999 Boca Systems, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without
the written consent of BOCA.
Every effort has been made to ensure that the information in this manual is accurate.
BOCA is not responsible for printing or clerical errors and reserves the right to change
specifications without notice.
Table of Contents Page
1.0 Introduction 1
2.0 Unpacking the Printer 2
3.0 A tour of your printer 3-4
4.0 Installation 5
5.0 Configuration 6
6.0 Standard Interface Pinouts 7
7.0 Thermal Paper - Theory and Specification 8
8.0 Maintenance and Adjustments 9-13
9.0 Spare Parts List 14
10.Troubleshooting Guide 15-16
Table of Figures and Appendices Page
Figure 1 Packaging 2
Figure 2 Micro Ghost Ticket Printer 3
Figure 3 Side view with door open 3
Figure 4 Rear view 4
Figure 5 Side view with electronics exposed 4
Figure 6 Ticket loading 5
Figure 7 Slider Adjustment 6
Figure 8 Optical Devices 10
Figure 9 Print head removal 12
Appendix A Operator Menu options through control panel
FCC NOTICE
NOTE: The equipment has been tested and found to comply with the limits for a class
A digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and , if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded
cables must be used with the unit to insure compliance.
i
WARRANTY INFORMATION
PRINTERS - BOCA warrants each printer to be free of defects for a period of one year
from the date of shipment when subject to normal use and service. This warranty
covers all parts and labor except for the print head which is warranted for 90 days. All
warranty labor is to be performed at the BOCA facility. Equipment damaged by misuse
or negligence including damage to print heads caused by defective ticket stock is
excluded from this warranty.
Any defective equipment meeting these conditions should be returned to BOCA for
repair (freight prepaid) in its original box and packing material. A short note describing
the failure should be enclosed with the printer.
Equipment damaged in shipping should be reported immediately both to BOCA and to
the shipper.
EXTENDED WARRANTY PLAN - BOCA offers extended warranty plans for all printer
models.These plans cover all parts and labor. All labor is to be performed at the
BOCA facility. Equipment damaged by misuse or negligence including damage to print
heads caused by defective ticket stock is excluded from this extended warranty. The
customer, at his option, may request BOCA to ship individual parts to expedite simple
repair procedures. In certain cases where the customer is unable to wait for the
normal repair cycle, BOCA will ship an exchange printer within one business day after
notification by the customer. All freight charges are the responsibility of the customer.
ii
1.0 Introduction
The BOCA Adjustable MC Ghost is a direct thermal ticket printer especially designed
for airline boarding pass and bagtag applications.The printer will automatically
determine if a boarding pass or tag is loaded. Two printers can be daisy chained
together in order to print both passes and bag tags from a single host computer.
This manual will provide the user with general information regarding printer set-up,
configuration and troubleshooting. Please consult the programming guide for additional
technical details.
1
2.0 Unpacking the Printer
The printer is shipped in a ruggedized container. Please save packing material for
future use. Remove the printer (see figure 1) and accessories from the box and
inspect for obvious damage. If damage is noticed please report it immediately to
BOCA.
Tel: (561) 998-9600 Fax: (561) 998-9609
The following items should be in the box:
a) Ticket Printer
b) Chinese AC power cord
c) Programming guide (on disk)
d) This manual (on disk)
e) Roller Stock Holder
f) 9 pin to 25 pin adapter
2
Figure 1 - Packaging
3.0 A Tour of Your Printer
Figure 2 - Micro Ghost ticket printer
Figure 3 - Micro Ghost ticket printer
3
ticket output slot
control panel
Adjustment Knob
Timing belt
Drive Pulleys
Stepper Motor
Transformer
LCD
Figure 4 - Micro Ghost - rear view
Figure 5 - Micro Ghost - top view with
electronics exposed
4
Roll Stock Holder
Main Logic Board
AC connector
On/Off switch
Ticket Entrance Slot
Interface connector,
Output to another printer
(25 pin male)
Interface connector,
Input from Host to another printer
(25 pin female)
Tabla de contenidos
Otros manuales de Impresora de Boca Systems
Boca Systems
Boca Systems FSP 44 Manual de usuario
Boca Systems
Boca Systems LEMUR-ERAM Manual de usuario
Boca Systems
Boca Systems Lemur-C Manual de usuario
Boca Systems
Boca Systems LEMUR-M Manual de usuario
Boca Systems
Boca Systems LEMUR-X Manual de usuario
Boca Systems
Boca Systems Mag 42 Manual de usuario
Boca Systems
Boca Systems SUBATM Manual de usuario
Boca Systems
Boca Systems LEMUR -C Manual de usuario
Boca Systems
Boca Systems Micro Manual de usuario
Boca Systems
Boca Systems LEMUR-FDIO Manual de usuario
Boca Systems
Boca Systems Lemur Manual de usuario
Boca Systems
Boca Systems Lemur-C Manual de usuario
Boca Systems
Boca Systems Lemur-Z Manual de usuario
Boca Systems
Boca Systems LEMUR-X Manual de usuario
Boca Systems
Boca Systems Micro Plus Manual de usuario
Boca Systems
Boca Systems Lemur-S Manual de usuario
Boca Systems
Boca Systems Mini MB Manual de usuario
Boca Systems
Boca Systems Lemur Manual de usuario
