BM PRO RVMaster Guía de referencia
DESCRIPTION OF PARTS DISPLAY NAVIGATION
Use the Page Navigation Button to move
from page to page.
Use the Menu Navigation Button to move
between menu items within a page.
PAIRING A SMARTPHONE TO THE NODE
The RVMaster smartphone app allows access
to more features of the RV that otherwise may
not be available.
Pairing your smartphone to the Node is simple.
The App will guide you through the process.
The Node can be paired to the RVMaster app
across a total of four devices.
1. Launch the App on your phone and choose
the device installed in your RV
2. Press the Page Navigation Button to
navigate to the Settings page.
3. When “Pair Device” is highlighted,
press the OK function button and your
smartphone will begin pairing to the Node.
OPERATING AN RV WITH A DISPLAY
HELP GUIDE
RVMaster
LIVING ROOM LIGHTS
KITCHEN LIGHTS
BEDROOM CEILING
WATER PUMP
CLIMATE
1
2
3
4
5
1. Page Navigation Button
Move between function screens, eg. From
Tanks to Water screen.
2. Menu Navigation Button
Navigate between items within a page, e.g.
in the Water page move from Pump to Elec
Heater.
3-4.Action Buttons
The function for each of the action buttons
changes depending on the selected menu
item. These functions will be displayed on
the screen, eg. OK, EXT, RET, On, Off.
5. Redundancy Buttons
Turn lights and water pump on or off.
The climate button takes you to the main
climate page.
1
2 3
When your smartphone is paired with the Node,
the Bluetooth icon is displayed on the App
home screen.
TEAM
BMPRO
.COM
BMPRO
Unit 1, 821 E Windsor Ave, Elkhart IN 46514 USA
teambmpro.com
PAIRING A WALL SWITCH
1. Using the button on the Display,
navigate to the Settings menu.
2. Using the button on the Display,
navigate down to Advanced.
3. In the Advanced setting menu, use the
button to navigate down to Pair Switch.
4. Press the OK action button to put the node
into Switch pairing mode.
5. While in paring mode, press any two
buttons at the same time on the switch you
want to pair.
FAULTS AND WARNINGS ON THE DISPLAY
The Display will show warnings if certain
issues are detected.
Gas Heater
CONFIGURING THE RV USING A SMARTPHONE
1. Identify the model of your RV.
2. In the RVMaster app, press the Settings
button to go to the Settings page.
3. Press the General Settings bar five times to
go to the RV Configuration page.
4. From the RV Configuration page, select
your vendor.
5. Select the model of your RV.
6. Press Next.
7. Select the year of your RV.
8. Press Next.
9. Select the floorplan of your RV.
10. Press Next.
11. Select any optional features of your RV.
12. Press Next.
13. Type the RV’s serial number.
14. Press Confirm.
15. The RVMaster App will restart and the new
configuration will be displayed.
A warning will appear if there is a fault with
one of the climate outputs or the temperature
sensor. A sensor fault is also indicated by no
room temperature value being shown, eg. -- F
Energy
A warning will appear if the Gas Heater fails to
ignite after three attempts.
AC Main
A warning will appear if the generator fault LED
is actively blinking.
Otros manuales para RVMaster
4
Otros manuales de Sistema de control de BM PRO
BM PRO
BM PRO OdysseyControl Manual de usuario
BM PRO
BM PRO MiniBoostPRO Manual de usuario
BM PRO
BM PRO JAYCOMMAND Manual de usuario
BM PRO
BM PRO JAYCOMMAND Manual de usuario
BM PRO
BM PRO RVMaster Guía de referencia
BM PRO
BM PRO RVMaster Guía de referencia
BM PRO
BM PRO RVMaster RVMC-LITE Guía de referencia
BM PRO
BM PRO THOR RVMASTER Manual de usuario
BM PRO
BM PRO BC300 XTERNAL SHUNT Manual de usuario
