Blueair ECO10 Manual de usuario
Blueair ECO10
Blueair EC010
User Manual
Contents
3 Welcome
4 Getting started
6 Getting the most from your Blueair system
7 How it works
8 Changing the filters
10 Specifications
11 Limited Warranty
Customer’s record
The model number and serial number of this product can be found on the bottom of this unit.
Please note them in the spaces provided and keep for future reference.
Model number Dealer’s name
Serial number Dealer’s address
Date of purchase Telephone number
2 Blueair ECO10
Blueair ECO10 3
Welcome
Thank you for choosing Blueair. This document gives you some useful
tips on how to use the Blueair ECO10 safely and effectively. Before
turning on your air purifier, be sure to familiarize yourself with the basic
operating and general safety instructions.
Filter replacement
Be sure to change your Blueair filters according to the recommended
filter replacement schedule. This helps keep your Blueair air purfiier
running in top condition. See page 8.
Extend your warranty
Complete and send your warranty card to Blueair today to extend your
limited warranty from one year to a lifetime.
Help keep the planet healthy, too
At Blueair, we’re in the business of clean air. Our air purifiers are
designed for maximum improvement of indoor air, but with minimum
impact on the natural world. The entire unit is recyclable, down to its
polypropylene filters.
4 Blueair ECO10
Getting started
Before you start using your Blueair ECO10 air purifier, take a few min-
utes to become familiar with the basics.
General safety instructions
The Blueair ECO10 air purifier is an electrical appliance. Please read
these safety instructions before use and take the necessary precautions
to reduce the risk of fire, electric shock or injury.
The Blueair Limited Warranty applies only if the unit is used accord-
ing to these instructions.
• Use the grounded three-prong power cable provided with
your Blueair unit. The plug fits into a grounded three-prong
outlet. Do not alter the plug in any way.
• Use the cable provided to plug the Blueair unit directly into an
appropriate electrical outlet (please refer to the voltage label on
your unit). The cable is packaged beneath the unit.
Placement
Place the unit in a location that allows air to circulate freely in, out and
around the unit. The minimum acceptable distance from another object
is approximately 4” or 10 cm. Use only genuine Blueair filters.
Do not place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near wet areas, such as bathrooms or laundry rooms, where it may come into
contact with water.
Near sources of heat, such as radiators, fireplaces or ovens.
Outdoors.
Blueair ECO10 5
Settings
To turn on the Blueair unit, plug the cable into a grounded three-prong
wall outlet. The blue light-emitting diode indicates that the unit is turned
on. Set the control knob to maximum speed for a few minutes of fast
initial cleaning.
Then adjust the control to the desired speed. Maximum speed is recom-
mended for daytime use, for fast initial cleaning or for very polluted air.
Minimum speed is generally recommended for nighttime use.
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
filtered air constantly circulates throughout the room.
Care and maintenance
Blueair air purifiers feature award-winning Swedish design, materials
and workmanship. To keep your unit in top condition, we recommend
routine cleaning to keep your Blueair unit looking good and working
well.
• Vacuum the air intake grille from the inside when you remove
the filters to replace them.
• Vacuum the small inlets with a soft brush attachment.
• Wipe the exterior of the unit with a soft, clean, damp cloth.
• Never clean with gasoline, chemical solvents or corrosive ma
terial also as these agents may damage the surface.
• Do not allow foreign objects to enter the ventilation or exhaust
openings. This may cause electric shock or damage the unit.
• Do not try to repair or adjust any of the electrical or mechanical
functions on your Blueair unit yourself. Contact your local
dealer or Blueair for warranty information.
6 Blueair ECO10
Getting the most from
your Blueair system
The Blueair system is easy to use. Start by choosing the right size unit
for your room, and change the filters according to recommended filter
replacement schedule. Remember that, just as air conditioners and
heaters have limits to the volume of air they can cool or heat, every air
purification system has limits to the volume of air it can clean. Follow
these common-sense guidelines.
Close your windows
You wouldn’t throw open your windows on a hot summer day and
expect your air conditioner to work efficiently, because you can feel the
hot air coming in and the cool air going out. Even though you can’t see
the contaminated air coming in and the clean air going out, the same
logic applies to your air purifier.
Close your doors, too
Just as you might seal off part of your house on a cold winter night to
keep your heater working more efficiently, seal off the room in which
your system is working for best results. This is especially important
for people using a Blueair system to ease nighttime asthma or allergy
attacks.
Run your system 24 hours per day
Blueair systems are designed for phenomenally low power usage, so
you can run the system 24/7 without raising your electricity bill. In fact, it
costs about the same to power a Blueair air purifier as it does to power
a single light bulb - between 5 and 120 watts, depending on the unit
and the operating speed.
Blueair ECO10 7
How it works
Simply plug the Blueair ECO10 in and turn it on. Depending on your
needs, choose between the high or low setting. The pre-filters effec-
tively capture larger airborne particles as the EC fan motor draws air into
the unit. Air passes through an ion chamber where airborne particles are
electrically charged with negative ions. Charged particles are drawn to
the HEPASilentTM filter surface. Purified air, which is virtually contami-
nant-free is re-circulated into the room.
A
irflow output
Blue “power on” light
Easy-to-change filters
-No tools required
Galvanized steel housing
Ion brushes
(no ozone generated)
A
irflow intake
EC fan motor
Two-speed
control knob
Power source and cord
Clean air out
Unfiltered air in
8 Blueair ECO10
Changing the filters
Step 4
Guide the first and
second replace-
ment filters into the
side slots. Ensure
that the side with
the words “facing
out” is turned
toward the outer
wall of the unit.
Step 3
Remove the filters
on each side.
Vacuum the grille
from the inside.
Step 2
Remove the filter
on top.
Step 1
Unplug the unit and
lift the lid from the
top of the unit.
Step 6
Snap the lid back
into place.
Step 5
Place the third filter
on top of the unit
and ensure that the
side with the words
“facing out” is
facing upwards.
Blueair ECO10 9
Filters
Patented HEPASilentTM technology makes the Blueair ECO10 incredibly
quiet. The unit comes with a complete set of three HEPASilentTM
particle filters already installed.
Particle Filter Kit. Includes three particle filters that remove dust, pollen,
bacteria, pet dander, mold spores and other airborne particles. The
particle filter is made of polypropylene, which help mechanically filter
out airborne particles. To maximize filter effectiveness, particles are
negatively charged by the Blueair unit before reaching the filters.
SmokestopTM Filter Kit. Includes three filters with enhanced active
carbon to remove gaseous pollutants such as cigarette and cigar smoke
or other VOCs (volatile organic compounds, including household paints
and other chemicals). You may notice a slight odor from the enhanced
active carbon when the filter is first used; this will quickly dissipate.
For optimal performance, Blueair recommends that you replace
filters every 12 months.
We offer a convenient Filter Subscription Program in some countries.
Contact your local dealer or Blueair to find out whether the program is
available to you.
IMPORTANT! Use only genuine Blueair filters to ensure proper function
of your unit and to qualify for full warranty coverage.
Dimensions 26 x 20 x 13 inches
(660 x 500 x 340 mm)
Weight 35 pounds (15.5 kilograms)
Room size 298 square feet (28 square meters)
CADR* Smoke: 190 Dust: 195 Pollen: 200
Airflow rate 250 cubic feet per minute
(425 cubic meters per hour)*
Power usage Minimum: 5 watts
Maximum: 10 watts
Noise level 49 dB(A) maximum speed
Filter service life 12 months
Warranty Lifetime
*Clean Air Delivery Rate, see www.cadr.org
Blueair reserves the right to change or modify any specifications without notice.
10 Blueair ECO10
Specifications
Otros manuales para ECO10
2
Tabla de contenidos
Otros manuales de Purificador de aire de Blueair
Blueair
Blueair 500 Series Manual de usuario
Blueair
Blueair Blueair 301 Manual de usuario
Blueair
Blueair Aware Manual de usuario
Blueair
Blueair 200 Series Manual de usuario
Blueair
Blueair Blue PURE 411 Manual de usuario
Blueair
Blueair Classic 290i Manual de usuario
Blueair
Blueair 400 series Manual de usuario
Blueair
Blueair Cabin P2i Manual de usuario
Blueair
Blueair JOY S Manual de usuario
Blueair
Blueair Blue PURE 221 Manual de usuario
Blueair
Blueair 300 series Manual de usuario
Blueair
Blueair Cabin P2iD Manual de usuario
Blueair
Blueair Blue Pure Mini Max Manual de usuario
Blueair
Blueair 402 Manual de usuario
Blueair
Blueair Airpod Manual de usuario
Blueair
Blueair Blue PURE 411 Manual de usuario
Blueair
Blueair Sense Manual de usuario
Blueair
Blueair 400 series Manual de usuario
Blueair
Blueair Sense Manual de usuario
Blueair
Blueair 650E Manual de usuario
