Blueair Sense Manual de usuario
English
User Manual
Guide d’utilisation
Blueair Sense
2 Blueair Sense
English
Contents
3 Welcome
4 Getting started
7 Getting the most from your Blueair system
8 Changing the filter
11 Filters
!THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND
ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL
CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE
BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE
APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.
CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER
MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
Blueair Sense 3
English
Welcome
Thank you for choosing Blueair. Before you start using your Blueair air
purifier, take a few minutes to become familiar with the basics.
Filter replacement
Be sure to change your Blueair filter according to the recommended filter
replacement schedule. This helps keep your Blueair air purifier running in
top condition. See page 8.
Extend your warranty
Complete and send your warranty card to Blueair today to extend your
limited warranty.
Help keep the planet healthy, too
Blueair air purifiers provide maximum improvement of indoor air quality with
minimum impact on the environment. The entire unit can be recycled.
4 Blueair Sense
English
Getting started
General safety instructions
The Blueair Sense air purifier is an electrical appliance. Please read the
safety instructions before use and take the necessary precautions to reduce
the risk of fire, electric shock or injury. The Blueair Limited Warranty applies
only if the unit is used according to these instructions.
• Use the grounded power cable provided with your Blueair unit. The plug
fits into a grounded outlet. Do not alter the plug in any way.
• Use the cable provided to plug the Blueair unit directly into an
appropriate electrical outlet (please refer to the voltage label on your
unit). The cable is packaged beneath the unit.
Placement
Place the unit in a location that allows air to circulate freely in, out and
around the unit. The minimum acceptable distance from another object is
4˝ or 10 cm. Use only genuine Blueair filters. Do not place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near sources of heat, such as radiators, fireplaces or ovens.
Near wet areas, such as bathrooms or laundry rooms, where it may come into
contact with water.
Outdoors.
Blueair Sense 5
English
Settings
Plug the power cable firmly and completely into the recessed power cord
socket located at the bottom of the unit and plug the other end into a
grounded wall outlet or power strip.
Turn on your Blueair unit by sweeping your hand over the display, which is
positioned in the center of the top. The blue light-emitting diode on the
unit’s front side indicates that the unit is working.
Set the unit to maximum speed by sweeping over the display until it shows
three blue rings. This is recommended for fast initial cleaning, daytime use, or
much polluted air. After a few minutes, set the unit to the desired speed.
Minimum speed is generally recommended for nighttime use.
Display function
Display is on standby for
energy saving.
Speed setting 1.
Speed setting 2. Speed setting 3.
When filter replacement is required, a
red replacement filter light will light up.
CHANGE
FILTER
6 Blueair Sense
English
How it works
Air is drawn into the air purifier where large airborne particles and gaseous
pollutants are captured in the HEPASilent™ pre-filter. The air then continu-
es through an encapsulated ion chamber where the remaining particles are
charged with negative ions. The charged particles are drawn to the HEPA-
Silent™ filter surface and purified air, virtually contaminant-free, is re-
circulated into the room.
Care and maintenance
Blueair air purifiers feature high quality design, materials and workmanship.
To keep your unit in top condition, we recommend routine cleaning. The
appliance must be disconnected from the supply mains before cleaning or
maintenance.
• Vacuum the air intake grille from the inside when you remove the filter to
replace it.
• Vacuum the small inlets with a soft brush attachment.
• Wipe the exterior of the unit with a soft, clean, damp cloth.
• Never clean with gasoline, chemical solvents or corrosive material also
as these agents may damage the surface.
• Do not allow foreign objects to enter the ventilation or exhaust openings.
This may cause electric shock or damage the unit.
• Do not try to repair or adjust any of the electrical or mechanical functions
on your Blueair unit yourself. Contact your local dealer or Blueair for
warranty information.
Blueair Sense 7
English
Getting the most from your
Blueair system
The Blueair system is easy to use. Make sure your unit is the right size for
your room, and change the filter according to the recommended filter
replacement schedule. Remember that, just as air conditioners and heaters
have limits to the volume of air they can cool or heat, every air purification
system has limits to the volume of air it can clean. Follow these
common-sense guidelines.
Close your windows
You wouldn’t throw open your windows on a hot summer day and expect
your air conditioner to work efficiently, because you can feel the hot air
coming in and the cool air going out. Even though you can’t see the
contaminated air coming in and the clean air going out, the same logic
applies to your air purifier.
Close your doors, too
Just as you might seal off part of your house on a cold winter night to keep
your heater working more efficiently, seal off the room in which your system
is working for best results.
Run your system 24 hours per day
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
filtered air constantly circulates throughout the room. Blueair systems are
designed for phenomenally low power usage. In fact, it costs about the
same to power a Blueair air purifier as it does to power a single light bulb,
depending on the unit and the operating speed.
8 Blueair Sense
English
Changing the filter
Step 3
Step 2
Step 1
Turn off the unit, pull out the
plug and put the unit down
with the backside facing up.
Pull out the filter cassettes
using the handles.
Pull out the particle filters and
carbon filter sheets from
each cassette.
Blueair Sense 9
English
Step 4
Step 5
Push in the new filters in
each cassette.
Make sure that the carbon
filter sheets stay in place by
pressing down the filters
below the tabs on the
cassettes.
Step 6
Slide the filter cassettes back
in place.
10 Blueair Sense
English
Step 7
Plug in the power cord,
stand the unit up and touch
the red filter replacement
light. Your Blueair is now
ready to once again give
you cleaner, healthier air.
Otros manuales para Sense
5
Tabla de contenidos
Idiomas:
Otros manuales de Purificador de aire de Blueair
Blueair
Blueair Sense Manual de usuario
Blueair
Blueair Classic 290i Manual de usuario
Blueair
Blueair Joy Series Manual de usuario
Blueair
Blueair 650E Manual de usuario
Blueair
Blueair Sense Manual de usuario
Blueair
Blueair Blue Pure 311i Max Manual de usuario
Blueair
Blueair Blueair 301 Manual de usuario
Blueair
Blueair 400 series Manual de usuario
Blueair
Blueair Blue Pure 211i + Max Manual de usuario
Blueair
Blueair Blue Pure 311i+ Max Manual de usuario
Blueair
Blueair Classic 500 Series Manual de usuario
Blueair
Blueair 300 series Manual de usuario
Blueair
Blueair Blue PURE 411 Manual de usuario
Blueair
Blueair Blue 3610 Manual de usuario
Blueair
Blueair Classic 400 series Manual de usuario
Blueair
Blueair Classic 400 series Manual de usuario
Blueair
Blueair HealthProtect 7400 Series Manual de usuario
Blueair
Blueair Airpod Manual de usuario
Blueair
Blueair Air Purifier Manual de usuario
Blueair
Blueair HealthProtect 7400 Series Manual de usuario
